xref: /openbmc/linux/arch/powerpc/boot/dts/fsl/p4080ds.dts (revision c4c3c32d) 
1/*
2 * P4080DS Device Tree Source
3 *
4 * Copyright 2009 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "p4080si-pre.dtsi"
36
37/ {
38	model = "fsl,P4080DS";
39	compatible = "fsl,P4080DS";
40	#address-cells = <2>;
41	#size-cells = <2>;
42	interrupt-parent = <&mpic>;
43
44	aliases {
45		phy_rgmii = &phyrgmii;
46		phy5_slot3 = &phy5slot3;
47		phy6_slot3 = &phy6slot3;
48		phy7_slot3 = &phy7slot3;
49		phy8_slot3 = &phy8slot3;
50		emi1_slot3 = &p4080mdio2;
51		emi1_slot4 = &p4080mdio1;
52		emi1_slot5 = &p4080mdio3;
53		emi1_rgmii = &p4080mdio0;
54		emi2_slot4 = &p4080xmdio1;
55		emi2_slot5 = &p4080xmdio3;
56	};
57
58	memory {
59		device_type = "memory";
60	};
61
62	reserved-memory {
63		#address-cells = <2>;
64		#size-cells = <2>;
65		ranges;
66
67		bman_fbpr: bman-fbpr {
68			size = <0 0x1000000>;
69			alignment = <0 0x1000000>;
70		};
71		qman_fqd: qman-fqd {
72			size = <0 0x400000>;
73			alignment = <0 0x400000>;
74		};
75		qman_pfdr: qman-pfdr {
76			size = <0 0x2000000>;
77			alignment = <0 0x2000000>;
78		};
79	};
80
81	dcsr: dcsr@f00000000 {
82		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
83	};
84
85	bportals: bman-portals@ff4000000 {
86		ranges = <0x0 0xf 0xf4000000 0x200000>;
87	};
88
89	qportals: qman-portals@ff4200000 {
90		ranges = <0x0 0xf 0xf4200000 0x200000>;
91	};
92
93	soc: soc@ffe000000 {
94		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
95		reg = <0xf 0xfe000000 0 0x00001000>;
96
97		spi@110000 {
98			flash@0 {
99				#address-cells = <1>;
100				#size-cells = <1>;
101				compatible = "spansion,s25sl12801", "jedec,spi-nor";
102				reg = <0>;
103				spi-max-frequency = <40000000>; /* input clock */
104				partition@u-boot {
105					label = "u-boot";
106					reg = <0x00000000 0x00100000>;
107					read-only;
108				};
109				partition@kernel {
110					label = "kernel";
111					reg = <0x00100000 0x00500000>;
112					read-only;
113				};
114				partition@dtb {
115					label = "dtb";
116					reg = <0x00600000 0x00100000>;
117					read-only;
118				};
119				partition@fs {
120					label = "file system";
121					reg = <0x00700000 0x00900000>;
122				};
123			};
124		};
125
126		i2c@118100 {
127			eeprom@51 {
128				compatible = "atmel,spd";
129				reg = <0x51>;
130			};
131			eeprom@52 {
132				compatible = "atmel,spd";
133				reg = <0x52>;
134			};
135			rtc@68 {
136				compatible = "dallas,ds3232";
137				reg = <0x68>;
138				interrupts = <0x1 0x1 0 0>;
139			};
140			adt7461@4c {
141				compatible = "adi,adt7461";
142				reg = <0x4c>;
143			};
144		};
145
146		i2c@118000 {
147			zl2006@21 {
148				compatible = "zl2006";
149				reg = <0x21>;
150			};
151			zl2006@22 {
152				compatible = "zl2006";
153				reg = <0x22>;
154			};
155			zl2006@23 {
156				compatible = "zl2006";
157				reg = <0x23>;
158			};
159			zl2006@24 {
160				compatible = "zl2006";
161				reg = <0x24>;
162			};
163			eeprom@50 {
164				compatible = "atmel,24c64";
165				reg = <0x50>;
166			};
167			eeprom@55 {
168				compatible = "atmel,24c64";
169				reg = <0x55>;
170			};
171			eeprom@56 {
172				compatible = "atmel,24c64";
173				reg = <0x56>;
174			};
175			eeprom@57 {
176				compatible = "atmel,24c02";
177				reg = <0x57>;
178			};
179		};
180
181		i2c@119100 {
182			/* 0x6E: ICS9FG108 */
183		};
184
185		usb0: usb@210000 {
186			phy_type = "ulpi";
187		};
188
189		usb1: usb@211000 {
190			dr_mode = "host";
191			phy_type = "ulpi";
192		};
193
194		fman@400000 {
195			ethernet@e0000 {
196				phy-handle = <&phy0>;
197				phy-connection-type = "sgmii";
198			};
199
200			ethernet@e2000 {
201				phy-handle = <&phy1>;
202				phy-connection-type = "sgmii";
203			};
204
205			ethernet@e4000 {
206				phy-handle = <&phy2>;
207				phy-connection-type = "sgmii";
208			};
209
210			ethernet@e6000 {
211				phy-handle = <&phy3>;
212				phy-connection-type = "sgmii";
213			};
214
215			ethernet@f0000 {
216				phy-handle = <&phy10>;
217				phy-connection-type = "xgmii";
218			};
219		};
220
221		fman@500000 {
222			ethernet@e0000 {
223				phy-handle = <&phy5>;
224				phy-connection-type = "sgmii";
225			};
226
227			ethernet@e2000 {
228				phy-handle = <&phy6>;
229				phy-connection-type = "sgmii";
230			};
231
232			ethernet@e4000 {
233				phy-handle = <&phy7>;
234				phy-connection-type = "sgmii";
235			};
236
237			ethernet@e6000 {
238				phy-handle = <&phy8>;
239				phy-connection-type = "sgmii";
240			};
241
242			ethernet@f0000 {
243				phy-handle = <&phy11>;
244				phy-connection-type = "xgmii";
245			};
246		};
247	};
248
249	rio: rapidio@ffe0c0000 {
250		reg = <0xf 0xfe0c0000 0 0x11000>;
251
252		port1 {
253			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
254		};
255		port2 {
256			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
257		};
258	};
259
260	lbc: localbus@ffe124000 {
261		reg = <0xf 0xfe124000 0 0x1000>;
262		ranges = <0 0 0xf 0xe8000000 0x08000000
263			  3 0 0xf 0xffdf0000 0x00008000>;
264
265		flash@0,0 {
266			compatible = "cfi-flash";
267			reg = <0 0 0x08000000>;
268			bank-width = <2>;
269			device-width = <2>;
270		};
271
272		board-control@3,0 {
273			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
274			reg = <3 0 0x30>;
275		};
276	};
277
278	pci0: pcie@ffe200000 {
279		reg = <0xf 0xfe200000 0 0x1000>;
280		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
281			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
282		pcie@0 {
283			ranges = <0x02000000 0 0xe0000000
284				  0x02000000 0 0xe0000000
285				  0 0x20000000
286
287				  0x01000000 0 0x00000000
288				  0x01000000 0 0x00000000
289				  0 0x00010000>;
290		};
291	};
292
293	pci1: pcie@ffe201000 {
294		reg = <0xf 0xfe201000 0 0x1000>;
295		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
296			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
297		pcie@0 {
298			ranges = <0x02000000 0 0xe0000000
299				  0x02000000 0 0xe0000000
300				  0 0x20000000
301
302				  0x01000000 0 0x00000000
303				  0x01000000 0 0x00000000
304				  0 0x00010000>;
305		};
306	};
307
308	pci2: pcie@ffe202000 {
309		reg = <0xf 0xfe202000 0 0x1000>;
310		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
311			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
312		pcie@0 {
313			ranges = <0x02000000 0 0xe0000000
314				  0x02000000 0 0xe0000000
315				  0 0x20000000
316
317				  0x01000000 0 0x00000000
318				  0x01000000 0 0x00000000
319				  0 0x00010000>;
320		};
321	};
322
323	mdio-mux-emi1 {
324		#address-cells = <1>;
325		#size-cells = <0>;
326		compatible = "mdio-mux-gpio", "mdio-mux";
327		mdio-parent-bus = <&mdio0>;
328		gpios = <&gpio0 1 0>, <&gpio0 0 0>;
329
330		p4080mdio0: mdio@0 {
331			#address-cells = <1>;
332			#size-cells = <0>;
333			reg = <0>;
334
335			phyrgmii: ethernet-phy@0 {
336				reg = <0x0>;
337			};
338		};
339
340		p4080mdio1: mdio@1 {
341			#address-cells = <1>;
342			#size-cells = <0>;
343			reg = <1>;
344
345			phy5: ethernet-phy@1c {
346				reg = <0x1c>;
347			};
348
349			phy6: ethernet-phy@1d {
350				reg = <0x1d>;
351			};
352
353			phy7: ethernet-phy@1e {
354				reg = <0x1e>;
355			};
356
357			phy8: ethernet-phy@1f {
358				reg = <0x1f>;
359			};
360		};
361
362		p4080mdio2: mdio@2 {
363			#address-cells = <1>;
364			#size-cells = <0>;
365			reg = <2>;
366			status = "disabled";
367
368			phy5slot3: ethernet-phy@1c {
369				reg = <0x1c>;
370			};
371
372			phy6slot3: ethernet-phy@1d {
373				reg = <0x1d>;
374			};
375
376			phy7slot3: ethernet-phy@1e {
377				reg = <0x1e>;
378			};
379
380			phy8slot3: ethernet-phy@1f {
381				reg = <0x1f>;
382			};
383		};
384
385		p4080mdio3: mdio@3 {
386			#address-cells = <1>;
387			#size-cells = <0>;
388			reg = <3>;
389
390			phy0: ethernet-phy@1c {
391				reg = <0x1c>;
392			};
393
394			phy1: ethernet-phy@1d {
395				reg = <0x1d>;
396			};
397
398			phy2: ethernet-phy@1e {
399				reg = <0x1e>;
400			};
401
402			phy3: ethernet-phy@1f {
403				reg = <0x1f>;
404			};
405		};
406	};
407
408	mdio-mux-emi2 {
409		#address-cells = <1>;
410		#size-cells = <0>;
411		compatible = "mdio-mux-gpio", "mdio-mux";
412		mdio-parent-bus = <&xmdio0>;
413		gpios = <&gpio0 3 0>, <&gpio0 2 0>;
414
415		p4080xmdio1: mdio@1 {
416			#address-cells = <1>;
417			#size-cells = <0>;
418			reg = <1>;
419
420			phy11: ethernet-phy@0 {
421				compatible = "ethernet-phy-ieee802.3-c45";
422				reg = <0x0>;
423			};
424		};
425
426		p4080xmdio3: mdio@3 {
427			#address-cells = <1>;
428			#size-cells = <0>;
429			reg = <3>;
430
431			phy10: ethernet-phy@4 {
432				compatible = "ethernet-phy-ieee802.3-c45";
433				reg = <0x4>;
434			};
435		};
436	};
437};
438
439/include/ "p4080si-post.dtsi"
440