xref: /openbmc/linux/arch/powerpc/boot/dts/fsl/p4080ds.dts (revision a06c488d)
1/*
2 * P4080DS Device Tree Source
3 *
4 * Copyright 2009 - 2014 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "p4080si-pre.dtsi"
36
37/ {
38	model = "fsl,P4080DS";
39	compatible = "fsl,P4080DS";
40	#address-cells = <2>;
41	#size-cells = <2>;
42	interrupt-parent = <&mpic>;
43
44	memory {
45		device_type = "memory";
46	};
47
48	reserved-memory {
49		#address-cells = <2>;
50		#size-cells = <2>;
51		ranges;
52
53		bman_fbpr: bman-fbpr {
54			size = <0 0x1000000>;
55			alignment = <0 0x1000000>;
56		};
57		qman_fqd: qman-fqd {
58			size = <0 0x400000>;
59			alignment = <0 0x400000>;
60		};
61		qman_pfdr: qman-pfdr {
62			size = <0 0x2000000>;
63			alignment = <0 0x2000000>;
64		};
65	};
66
67	dcsr: dcsr@f00000000 {
68		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
69	};
70
71	bportals: bman-portals@ff4000000 {
72		ranges = <0x0 0xf 0xf4000000 0x200000>;
73	};
74
75	qportals: qman-portals@ff4200000 {
76		ranges = <0x0 0xf 0xf4200000 0x200000>;
77	};
78
79	soc: soc@ffe000000 {
80		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
81		reg = <0xf 0xfe000000 0 0x00001000>;
82
83		spi@110000 {
84			flash@0 {
85				#address-cells = <1>;
86				#size-cells = <1>;
87				compatible = "spansion,s25sl12801";
88				reg = <0>;
89				spi-max-frequency = <40000000>; /* input clock */
90				partition@u-boot {
91					label = "u-boot";
92					reg = <0x00000000 0x00100000>;
93					read-only;
94				};
95				partition@kernel {
96					label = "kernel";
97					reg = <0x00100000 0x00500000>;
98					read-only;
99				};
100				partition@dtb {
101					label = "dtb";
102					reg = <0x00600000 0x00100000>;
103					read-only;
104				};
105				partition@fs {
106					label = "file system";
107					reg = <0x00700000 0x00900000>;
108				};
109			};
110		};
111
112		i2c@118100 {
113			eeprom@51 {
114				compatible = "at24,24c256";
115				reg = <0x51>;
116			};
117			eeprom@52 {
118				compatible = "at24,24c256";
119				reg = <0x52>;
120			};
121			rtc@68 {
122				compatible = "dallas,ds3232";
123				reg = <0x68>;
124				interrupts = <0x1 0x1 0 0>;
125			};
126			adt7461@4c {
127				compatible = "adi,adt7461";
128				reg = <0x4c>;
129			};
130		};
131
132		usb0: usb@210000 {
133			phy_type = "ulpi";
134		};
135
136		usb1: usb@211000 {
137			dr_mode = "host";
138			phy_type = "ulpi";
139		};
140	};
141
142	rio: rapidio@ffe0c0000 {
143		reg = <0xf 0xfe0c0000 0 0x11000>;
144
145		port1 {
146			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
147		};
148		port2 {
149			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
150		};
151	};
152
153	lbc: localbus@ffe124000 {
154		reg = <0xf 0xfe124000 0 0x1000>;
155		ranges = <0 0 0xf 0xe8000000 0x08000000
156			  3 0 0xf 0xffdf0000 0x00008000>;
157
158		flash@0,0 {
159			compatible = "cfi-flash";
160			reg = <0 0 0x08000000>;
161			bank-width = <2>;
162			device-width = <2>;
163		};
164
165		board-control@3,0 {
166			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
167			reg = <3 0 0x30>;
168		};
169	};
170
171	pci0: pcie@ffe200000 {
172		reg = <0xf 0xfe200000 0 0x1000>;
173		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
174			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
175		pcie@0 {
176			ranges = <0x02000000 0 0xe0000000
177				  0x02000000 0 0xe0000000
178				  0 0x20000000
179
180				  0x01000000 0 0x00000000
181				  0x01000000 0 0x00000000
182				  0 0x00010000>;
183		};
184	};
185
186	pci1: pcie@ffe201000 {
187		reg = <0xf 0xfe201000 0 0x1000>;
188		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
189			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
190		pcie@0 {
191			ranges = <0x02000000 0 0xe0000000
192				  0x02000000 0 0xe0000000
193				  0 0x20000000
194
195				  0x01000000 0 0x00000000
196				  0x01000000 0 0x00000000
197				  0 0x00010000>;
198		};
199	};
200
201	pci2: pcie@ffe202000 {
202		reg = <0xf 0xfe202000 0 0x1000>;
203		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
204			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
205		pcie@0 {
206			ranges = <0x02000000 0 0xe0000000
207				  0x02000000 0 0xe0000000
208				  0 0x20000000
209
210				  0x01000000 0 0x00000000
211				  0x01000000 0 0x00000000
212				  0 0x00010000>;
213		};
214	};
215
216};
217
218/include/ "p4080si-post.dtsi"
219