xref: /openbmc/linux/arch/powerpc/boot/dts/fsl/p4080ds.dts (revision 6c33a6f4) 
1/*
2 * P4080DS Device Tree Source
3 *
4 * Copyright 2009 - 2015 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35/include/ "p4080si-pre.dtsi"
36
37/ {
38	model = "fsl,P4080DS";
39	compatible = "fsl,P4080DS";
40	#address-cells = <2>;
41	#size-cells = <2>;
42	interrupt-parent = <&mpic>;
43
44	aliases {
45		phy_rgmii = &phyrgmii;
46		phy5_slot3 = &phy5slot3;
47		phy6_slot3 = &phy6slot3;
48		phy7_slot3 = &phy7slot3;
49		phy8_slot3 = &phy8slot3;
50		emi1_slot3 = &p4080mdio2;
51		emi1_slot4 = &p4080mdio1;
52		emi1_slot5 = &p4080mdio3;
53		emi1_rgmii = &p4080mdio0;
54		emi2_slot4 = &p4080xmdio1;
55		emi2_slot5 = &p4080xmdio3;
56	};
57
58	memory {
59		device_type = "memory";
60	};
61
62	reserved-memory {
63		#address-cells = <2>;
64		#size-cells = <2>;
65		ranges;
66
67		bman_fbpr: bman-fbpr {
68			size = <0 0x1000000>;
69			alignment = <0 0x1000000>;
70		};
71		qman_fqd: qman-fqd {
72			size = <0 0x400000>;
73			alignment = <0 0x400000>;
74		};
75		qman_pfdr: qman-pfdr {
76			size = <0 0x2000000>;
77			alignment = <0 0x2000000>;
78		};
79	};
80
81	dcsr: dcsr@f00000000 {
82		ranges = <0x00000000 0xf 0x00000000 0x01008000>;
83	};
84
85	bportals: bman-portals@ff4000000 {
86		ranges = <0x0 0xf 0xf4000000 0x200000>;
87	};
88
89	qportals: qman-portals@ff4200000 {
90		ranges = <0x0 0xf 0xf4200000 0x200000>;
91	};
92
93	soc: soc@ffe000000 {
94		ranges = <0x00000000 0xf 0xfe000000 0x1000000>;
95		reg = <0xf 0xfe000000 0 0x00001000>;
96
97		spi@110000 {
98			flash@0 {
99				#address-cells = <1>;
100				#size-cells = <1>;
101				compatible = "spansion,s25sl12801", "jedec,spi-nor";
102				reg = <0>;
103				spi-max-frequency = <40000000>; /* input clock */
104				partition@u-boot {
105					label = "u-boot";
106					reg = <0x00000000 0x00100000>;
107					read-only;
108				};
109				partition@kernel {
110					label = "kernel";
111					reg = <0x00100000 0x00500000>;
112					read-only;
113				};
114				partition@dtb {
115					label = "dtb";
116					reg = <0x00600000 0x00100000>;
117					read-only;
118				};
119				partition@fs {
120					label = "file system";
121					reg = <0x00700000 0x00900000>;
122				};
123			};
124		};
125
126		i2c@118100 {
127			eeprom@51 {
128				compatible = "atmel,24c256";
129				reg = <0x51>;
130			};
131			eeprom@52 {
132				compatible = "atmel,24c256";
133				reg = <0x52>;
134			};
135			rtc@68 {
136				compatible = "dallas,ds3232";
137				reg = <0x68>;
138				interrupts = <0x1 0x1 0 0>;
139			};
140			adt7461@4c {
141				compatible = "adi,adt7461";
142				reg = <0x4c>;
143			};
144		};
145
146		usb0: usb@210000 {
147			phy_type = "ulpi";
148		};
149
150		usb1: usb@211000 {
151			dr_mode = "host";
152			phy_type = "ulpi";
153		};
154
155		fman@400000 {
156			ethernet@e0000 {
157				phy-handle = <&phy0>;
158				phy-connection-type = "sgmii";
159			};
160
161			ethernet@e2000 {
162				phy-handle = <&phy1>;
163				phy-connection-type = "sgmii";
164			};
165
166			ethernet@e4000 {
167				phy-handle = <&phy2>;
168				phy-connection-type = "sgmii";
169			};
170
171			ethernet@e6000 {
172				phy-handle = <&phy3>;
173				phy-connection-type = "sgmii";
174			};
175
176			ethernet@f0000 {
177				phy-handle = <&phy10>;
178				phy-connection-type = "xgmii";
179			};
180		};
181
182		fman@500000 {
183			ethernet@e0000 {
184				phy-handle = <&phy5>;
185				phy-connection-type = "sgmii";
186			};
187
188			ethernet@e2000 {
189				phy-handle = <&phy6>;
190				phy-connection-type = "sgmii";
191			};
192
193			ethernet@e4000 {
194				phy-handle = <&phy7>;
195				phy-connection-type = "sgmii";
196			};
197
198			ethernet@e6000 {
199				phy-handle = <&phy8>;
200				phy-connection-type = "sgmii";
201			};
202
203			ethernet@f0000 {
204				phy-handle = <&phy11>;
205				phy-connection-type = "xgmii";
206			};
207		};
208	};
209
210	rio: rapidio@ffe0c0000 {
211		reg = <0xf 0xfe0c0000 0 0x11000>;
212
213		port1 {
214			ranges = <0 0 0xc 0x20000000 0 0x10000000>;
215		};
216		port2 {
217			ranges = <0 0 0xc 0x30000000 0 0x10000000>;
218		};
219	};
220
221	lbc: localbus@ffe124000 {
222		reg = <0xf 0xfe124000 0 0x1000>;
223		ranges = <0 0 0xf 0xe8000000 0x08000000
224			  3 0 0xf 0xffdf0000 0x00008000>;
225
226		flash@0,0 {
227			compatible = "cfi-flash";
228			reg = <0 0 0x08000000>;
229			bank-width = <2>;
230			device-width = <2>;
231		};
232
233		board-control@3,0 {
234			compatible = "fsl,p4080ds-fpga", "fsl,fpga-ngpixis";
235			reg = <3 0 0x30>;
236		};
237	};
238
239	pci0: pcie@ffe200000 {
240		reg = <0xf 0xfe200000 0 0x1000>;
241		ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000
242			  0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>;
243		pcie@0 {
244			ranges = <0x02000000 0 0xe0000000
245				  0x02000000 0 0xe0000000
246				  0 0x20000000
247
248				  0x01000000 0 0x00000000
249				  0x01000000 0 0x00000000
250				  0 0x00010000>;
251		};
252	};
253
254	pci1: pcie@ffe201000 {
255		reg = <0xf 0xfe201000 0 0x1000>;
256		ranges = <0x02000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
257			  0x01000000 0x0 0x00000000 0xf 0xf8010000 0x0 0x00010000>;
258		pcie@0 {
259			ranges = <0x02000000 0 0xe0000000
260				  0x02000000 0 0xe0000000
261				  0 0x20000000
262
263				  0x01000000 0 0x00000000
264				  0x01000000 0 0x00000000
265				  0 0x00010000>;
266		};
267	};
268
269	pci2: pcie@ffe202000 {
270		reg = <0xf 0xfe202000 0 0x1000>;
271		ranges = <0x02000000 0 0xe0000000 0xc 0x40000000 0 0x20000000
272			  0x01000000 0 0x00000000 0xf 0xf8020000 0 0x00010000>;
273		pcie@0 {
274			ranges = <0x02000000 0 0xe0000000
275				  0x02000000 0 0xe0000000
276				  0 0x20000000
277
278				  0x01000000 0 0x00000000
279				  0x01000000 0 0x00000000
280				  0 0x00010000>;
281		};
282	};
283
284	mdio-mux-emi1 {
285		#address-cells = <1>;
286		#size-cells = <0>;
287		compatible = "mdio-mux-gpio", "mdio-mux";
288		mdio-parent-bus = <&mdio0>;
289		gpios = <&gpio0 1 0>, <&gpio0 0 0>;
290
291		p4080mdio0: mdio@0 {
292			#address-cells = <1>;
293			#size-cells = <0>;
294			reg = <0>;
295
296			phyrgmii: ethernet-phy@0 {
297				reg = <0x0>;
298			};
299		};
300
301		p4080mdio1: mdio@1 {
302			#address-cells = <1>;
303			#size-cells = <0>;
304			reg = <1>;
305
306			phy5: ethernet-phy@1c {
307				reg = <0x1c>;
308			};
309
310			phy6: ethernet-phy@1d {
311				reg = <0x1d>;
312			};
313
314			phy7: ethernet-phy@1e {
315				reg = <0x1e>;
316			};
317
318			phy8: ethernet-phy@1f {
319				reg = <0x1f>;
320			};
321		};
322
323		p4080mdio2: mdio@2 {
324			#address-cells = <1>;
325			#size-cells = <0>;
326			reg = <2>;
327			status = "disabled";
328
329			phy5slot3: ethernet-phy@1c {
330				reg = <0x1c>;
331			};
332
333			phy6slot3: ethernet-phy@1d {
334				reg = <0x1d>;
335			};
336
337			phy7slot3: ethernet-phy@1e {
338				reg = <0x1e>;
339			};
340
341			phy8slot3: ethernet-phy@1f {
342				reg = <0x1f>;
343			};
344		};
345
346		p4080mdio3: mdio@3 {
347			#address-cells = <1>;
348			#size-cells = <0>;
349			reg = <3>;
350
351			phy0: ethernet-phy@1c {
352				reg = <0x1c>;
353			};
354
355			phy1: ethernet-phy@1d {
356				reg = <0x1d>;
357			};
358
359			phy2: ethernet-phy@1e {
360				reg = <0x1e>;
361			};
362
363			phy3: ethernet-phy@1f {
364				reg = <0x1f>;
365			};
366		};
367	};
368
369	mdio-mux-emi2 {
370		#address-cells = <1>;
371		#size-cells = <0>;
372		compatible = "mdio-mux-gpio", "mdio-mux";
373		mdio-parent-bus = <&xmdio0>;
374		gpios = <&gpio0 3 0>, <&gpio0 2 0>;
375
376		p4080xmdio1: mdio@1 {
377			#address-cells = <1>;
378			#size-cells = <0>;
379			reg = <1>;
380
381			phy11: ethernet-phy@0 {
382				compatible = "ethernet-phy-ieee802.3-c45";
383				reg = <0x0>;
384			};
385		};
386
387		p4080xmdio3: mdio@3 {
388			#address-cells = <1>;
389			#size-cells = <0>;
390			reg = <3>;
391
392			phy10: ethernet-phy@4 {
393				compatible = "ethernet-phy-ieee802.3-c45";
394				reg = <0x4>;
395			};
396		};
397	};
398};
399
400/include/ "p4080si-post.dtsi"
401