1/*
2 * P2020 RDB-PC Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&lbc {
36	nor@0,0 {
37		#address-cells = <1>;
38		#size-cells = <1>;
39		compatible = "cfi-flash";
40		reg = <0x0 0x0 0x1000000>;
41		bank-width = <2>;
42		device-width = <1>;
43
44		partition@0 {
45			/* This location must not be altered  */
46			/* 256KB for Vitesse 7385 Switch firmware */
47			reg = <0x0 0x00040000>;
48			label = "NOR Vitesse-7385 Firmware";
49			read-only;
50		};
51
52		partition@40000 {
53			/* 256KB for DTB Image */
54			reg = <0x00040000 0x00040000>;
55			label = "NOR DTB Image";
56		};
57
58		partition@80000 {
59			/* 3.5 MB for Linux Kernel Image */
60			reg = <0x00080000 0x00380000>;
61			label = "NOR Linux Kernel Image";
62		};
63
64		partition@400000 {
65			/* 11MB for JFFS2 based Root file System */
66			reg = <0x00400000 0x00b00000>;
67			label = "NOR JFFS2 Root File System";
68		};
69
70		partition@f00000 {
71			/* This location must not be altered  */
72			/* 512KB for u-boot Bootloader Image */
73			/* 512KB for u-boot Environment Variables */
74			reg = <0x00f00000 0x00100000>;
75			label = "NOR U-Boot Image";
76			read-only;
77		};
78	};
79
80	nand@1,0 {
81		#address-cells = <1>;
82		#size-cells = <1>;
83		compatible = "fsl,p2020-fcm-nand",
84				 "fsl,elbc-fcm-nand";
85		reg = <0x1 0x0 0x40000>;
86
87		partition@0 {
88			/* This location must not be altered  */
89			/* 1MB for u-boot Bootloader Image */
90			reg = <0x0 0x00100000>;
91			label = "NAND U-Boot Image";
92			read-only;
93		};
94
95		partition@100000 {
96			/* 1MB for DTB Image */
97			reg = <0x00100000 0x00100000>;
98			label = "NAND DTB Image";
99		};
100
101		partition@200000 {
102			/* 4MB for Linux Kernel Image */
103			reg = <0x00200000 0x00400000>;
104			label = "NAND Linux Kernel Image";
105		};
106
107		partition@600000 {
108			/* 4MB for Compressed Root file System Image */
109			reg = <0x00600000 0x00400000>;
110			label = "NAND Compressed RFS Image";
111		};
112
113		partition@a00000 {
114			/* 7MB for JFFS2 based Root file System */
115			reg = <0x00a00000 0x00700000>;
116			label = "NAND JFFS2 Root File System";
117		};
118
119		partition@1100000 {
120			/* 15MB for JFFS2 based Root file System */
121			reg = <0x01100000 0x00f00000>;
122			label = "NAND Writable User area";
123		};
124	};
125
126	L2switch@2,0 {
127		#address-cells = <1>;
128		#size-cells = <1>;
129		compatible = "vitesse-7385";
130		reg = <0x2 0x0 0x20000>;
131	};
132
133	cpld@3,0 {
134		#address-cells = <1>;
135		#size-cells = <1>;
136		compatible = "cpld";
137		reg = <0x3 0x0 0x20000>;
138		read-only;
139	};
140};
141
142&soc {
143	i2c@3000 {
144		rtc@68 {
145			compatible = "pericom,pt7c4338";
146			reg = <0x68>;
147		};
148	};
149
150	spi@7000 {
151		flash@0 {
152			#address-cells = <1>;
153			#size-cells = <1>;
154			compatible = "spansion,m25p80";
155			reg = <0>;
156			spi-max-frequency = <40000000>;
157
158			partition@0 {
159				/* 512KB for u-boot Bootloader Image */
160				reg = <0x0 0x00080000>;
161				label = "SPI U-Boot Image";
162				read-only;
163			};
164
165			partition@80000 {
166				/* 512KB for DTB Image */
167				reg = <0x00080000 0x00080000>;
168				label = "SPI DTB Image";
169			};
170
171			partition@100000 {
172				/* 4MB for Linux Kernel Image */
173				reg = <0x00100000 0x00400000>;
174				label = "SPI Linux Kernel Image";
175			};
176
177			partition@500000 {
178				/* 4MB for Compressed RFS Image */
179				reg = <0x00500000 0x00400000>;
180				label = "SPI Compressed RFS Image";
181			};
182
183			partition@900000 {
184				/* 7MB for JFFS2 based RFS */
185				reg = <0x00900000 0x00700000>;
186				label = "SPI JFFS2 RFS";
187			};
188		};
189	};
190
191	usb@22000 {
192		phy_type = "ulpi";
193	};
194
195	mdio@24520 {
196		phy0: ethernet-phy@0 {
197			interrupts = <3 1 0 0>;
198			reg = <0x0>;
199			};
200		phy1: ethernet-phy@1 {
201			interrupts = <2 1 0 0>;
202			reg = <0x1>;
203			};
204	};
205
206	mdio@25520 {
207		tbi0: tbi-phy@11 {
208			reg = <0x11>;
209			device_type = "tbi-phy";
210		};
211	};
212
213	mdio@26520 {
214		status = "disabled";
215	};
216
217	ptp_clock@24e00 {
218		fsl,tclk-period	= <5>;
219		fsl,tmr-prsc	= <2>;
220		fsl,tmr-add	= <0xaaaaaaab>;
221		fsl,tmr-fiper1	= <999999995>;
222		fsl,tmr-fiper2	= <99990>;
223		fsl,max-adj	= <299999999>;
224	};
225
226	enet0: ethernet@24000 {
227		fixed-link = <1 1 1000 0 0>;
228		phy-connection-type = "rgmii-id";
229	};
230
231	enet1: ethernet@25000 {
232		tbi-handle = <&tbi0>;
233		phy-handle = <&phy0>;
234		phy-connection-type = "sgmii";
235	};
236
237	enet2: ethernet@26000 {
238		phy-handle = <&phy1>;
239		phy-connection-type = "rgmii-id";
240	};
241};
242