1/* 2 * P1021 MDS Device Tree Source 3 * 4 * Copyright 2010,2012 Freescale Semiconductor Inc. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; either version 2 of the License, or (at your 9 * option) any later version. 10 */ 11 12/include/ "p1021si-pre.dtsi" 13/ { 14 model = "fsl,P1021"; 15 compatible = "fsl,P1021MDS"; 16 17 aliases { 18 ethernet3 = &enet3; 19 ethernet4 = &enet4; 20 }; 21 22 memory { 23 device_type = "memory"; 24 }; 25 26 lbc: localbus@ffe05000 { 27 reg = <0x0 0xffe05000 0x0 0x1000>; 28 29 /* NAND Flash, BCSR, PMC0/1*/ 30 ranges = <0x0 0x0 0x0 0xfc000000 0x02000000 31 0x1 0x0 0x0 0xf8000000 0x00008000 32 0x2 0x0 0x0 0xf8010000 0x00020000 33 0x3 0x0 0x0 0xf8020000 0x00020000>; 34 35 nand@0,0 { 36 #address-cells = <1>; 37 #size-cells = <1>; 38 compatible = "fsl,p1021-fcm-nand", 39 "fsl,elbc-fcm-nand"; 40 reg = <0x0 0x0 0x40000>; 41 42 partition@0 { 43 /* This location must not be altered */ 44 /* 1MB for u-boot Bootloader Image */ 45 reg = <0x0 0x00100000>; 46 label = "NAND (RO) U-Boot Image"; 47 read-only; 48 }; 49 50 partition@100000 { 51 /* 1MB for DTB Image */ 52 reg = <0x00100000 0x00100000>; 53 label = "NAND (RO) DTB Image"; 54 read-only; 55 }; 56 57 partition@200000 { 58 /* 4MB for Linux Kernel Image */ 59 reg = <0x00200000 0x00400000>; 60 label = "NAND (RO) Linux Kernel Image"; 61 read-only; 62 }; 63 64 partition@600000 { 65 /* 5MB for Compressed Root file System Image */ 66 reg = <0x00600000 0x00500000>; 67 label = "NAND (RO) Compressed RFS Image"; 68 read-only; 69 }; 70 71 partition@b00000 { 72 /* 6MB for JFFS2 based Root file System */ 73 reg = <0x00a00000 0x00600000>; 74 label = "NAND (RW) JFFS2 Root File System"; 75 }; 76 77 partition@1100000 { 78 /* 14MB for JFFS2 based Root file System */ 79 reg = <0x01100000 0x00e00000>; 80 label = "NAND (RW) Writable User area"; 81 }; 82 83 partition@1f00000 { 84 /* 1MB for microcode */ 85 reg = <0x01f00000 0x00100000>; 86 label = "NAND (RO) QE Ucode"; 87 read-only; 88 }; 89 }; 90 91 bcsr@1,0 { 92 #address-cells = <1>; 93 #size-cells = <1>; 94 compatible = "fsl,p1021mds-bcsr"; 95 reg = <1 0 0x8000>; 96 ranges = <0 1 0 0x8000>; 97 }; 98 99 pib@2,0 { 100 compatible = "fsl,p1021mds-pib"; 101 reg = <2 0 0x10000>; 102 }; 103 104 pib@3,0 { 105 compatible = "fsl,p1021mds-pib"; 106 reg = <3 0 0x10000>; 107 }; 108 }; 109 110 soc: soc@ffe00000 { 111 compatible = "fsl,p1021-immr", "simple-bus"; 112 ranges = <0x0 0x0 0xffe00000 0x100000>; 113 114 i2c@3000 { 115 rtc@68 { 116 compatible = "dallas,ds1374"; 117 reg = <0x68>; 118 }; 119 }; 120 121 spi@7000 { 122 123 flash@0 { 124 #address-cells = <1>; 125 #size-cells = <1>; 126 compatible = "spansion,s25sl12801", "jedec,spi-nor"; 127 reg = <0>; 128 spi-max-frequency = <40000000>; /* input clock */ 129 130 partition@u-boot { 131 label = "u-boot-spi"; 132 reg = <0x00000000 0x00100000>; 133 read-only; 134 }; 135 partition@kernel { 136 label = "kernel-spi"; 137 reg = <0x00100000 0x00500000>; 138 read-only; 139 }; 140 partition@dtb { 141 label = "dtb-spi"; 142 reg = <0x00600000 0x00100000>; 143 read-only; 144 }; 145 partition@fs { 146 label = "file system-spi"; 147 reg = <0x00700000 0x00900000>; 148 }; 149 }; 150 }; 151 152 usb@22000 { 153 phy_type = "ulpi"; 154 dr_mode = "host"; 155 }; 156 157 mdio@24000 { 158 phy0: ethernet-phy@0 { 159 interrupts = <1 1 0 0>; 160 reg = <0x0>; 161 }; 162 phy1: ethernet-phy@1 { 163 interrupts = <2 1 0 0>; 164 reg = <0x1>; 165 }; 166 phy4: ethernet-phy@4 { 167 reg = <0x4>; 168 }; 169 tbi-phy@5 { 170 device_type = "tbi-phy"; 171 reg = <0x5>; 172 }; 173 }; 174 175 mdio@25000 { 176 tbi0: tbi-phy@11 { 177 reg = <0x11>; 178 device_type = "tbi-phy"; 179 }; 180 }; 181 182 ethernet@b0000 { 183 phy-handle = <&phy0>; 184 phy-connection-type = "rgmii-id"; 185 }; 186 187 ethernet@b1000 { 188 phy-handle = <&phy4>; 189 tbi-handle = <&tbi0>; 190 phy-connection-type = "sgmii"; 191 }; 192 193 ethernet@b2000 { 194 phy-handle = <&phy1>; 195 phy-connection-type = "rgmii-id"; 196 }; 197 198 par_io@e0100 { 199 #address-cells = <1>; 200 #size-cells = <1>; 201 reg = <0xe0100 0x60>; 202 ranges = <0x0 0xe0100 0x60>; 203 device_type = "par_io"; 204 num-ports = <3>; 205 pio1: ucc_pin@1 { 206 pio-map = < 207 /* port pin dir open_drain assignment has_irq */ 208 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ 209 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ 210 0x0 0x17 0x2 0x0 0x2 0x0 /* CLK12 */ 211 0x0 0x18 0x2 0x0 0x1 0x0 /* CLK9 */ 212 0x0 0x7 0x1 0x0 0x2 0x0 /* ENET1_TXD0_SER1_TXD0 */ 213 0x0 0x9 0x1 0x0 0x2 0x0 /* ENET1_TXD1_SER1_TXD1 */ 214 0x0 0xb 0x1 0x0 0x2 0x0 /* ENET1_TXD2_SER1_TXD2 */ 215 0x0 0xc 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */ 216 0x0 0x6 0x2 0x0 0x2 0x0 /* ENET1_RXD0_SER1_RXD0 */ 217 0x0 0xa 0x2 0x0 0x2 0x0 /* ENET1_RXD1_SER1_RXD1 */ 218 0x0 0xe 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */ 219 0x0 0xf 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */ 220 0x0 0x5 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */ 221 0x0 0xd 0x1 0x0 0x2 0x0 /* ENET1_TX_ER */ 222 0x0 0x4 0x2 0x0 0x2 0x0 /* ENET1_RX_DV_SER1_CTS_B */ 223 0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RX_ER_SER1_CD_B */ 224 0x0 0x11 0x2 0x0 0x2 0x0 /* ENET1_CRS */ 225 0x0 0x10 0x2 0x0 0x2 0x0>; /* ENET1_COL */ 226 }; 227 228 pio2: ucc_pin@2 { 229 pio-map = < 230 /* port pin dir open_drain assignment has_irq */ 231 0x1 0x13 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */ 232 0x1 0x14 0x3 0x0 0x1 0x0 /* QE_MUX_MDIO */ 233 0x1 0xb 0x2 0x0 0x1 0x0 /* CLK13 */ 234 0x1 0x7 0x1 0x0 0x2 0x0 /* ENET5_TXD0_SER5_TXD0 */ 235 0x1 0xa 0x1 0x0 0x2 0x0 /* ENET5_TXD1_SER5_TXD1 */ 236 0x1 0x6 0x2 0x0 0x2 0x0 /* ENET5_RXD0_SER5_RXD0 */ 237 0x1 0x9 0x2 0x0 0x2 0x0 /* ENET5_RXD1_SER5_RXD1 */ 238 0x1 0x5 0x1 0x0 0x2 0x0 /* ENET5_TX_EN_SER5_RTS_B */ 239 0x1 0x4 0x2 0x0 0x2 0x0 /* ENET5_RX_DV_SER5_CTS_B */ 240 0x1 0x8 0x2 0x0 0x2 0x0>; /* ENET5_RX_ER_SER5_CD_B */ 241 }; 242 }; 243 }; 244 245 pci0: pcie@ffe09000 { 246 reg = <0 0xffe09000 0 0x1000>; 247 ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 248 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>; 249 pcie@0 { 250 ranges = <0x2000000 0x0 0xa0000000 251 0x2000000 0x0 0xa0000000 252 0x0 0x20000000 253 254 0x1000000 0x0 0x0 255 0x1000000 0x0 0x0 256 0x0 0x100000>; 257 }; 258 }; 259 260 pci1: pcie@ffe0a000 { 261 reg = <0 0xffe0a000 0 0x1000>; 262 ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 263 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>; 264 pcie@0 { 265 ranges = <0x2000000 0x0 0xc0000000 266 0x2000000 0x0 0xc0000000 267 0x0 0x20000000 268 269 0x1000000 0x0 0x0 270 0x1000000 0x0 0x0 271 0x0 0x100000>; 272 }; 273 }; 274 275 qe: qe@ffe80000 { 276 ranges = <0x0 0x0 0xffe80000 0x40000>; 277 reg = <0 0xffe80000 0 0x480>; 278 brg-frequency = <0>; 279 bus-frequency = <0>; 280 status = "disabled"; /* no firmware loaded */ 281 282 enet3: ucc@2000 { 283 device_type = "network"; 284 compatible = "ucc_geth"; 285 local-mac-address = [ 00 00 00 00 00 00 ]; 286 rx-clock-name = "clk12"; 287 tx-clock-name = "clk9"; 288 pio-handle = <&pio1>; 289 phy-handle = <&qe_phy0>; 290 phy-connection-type = "mii"; 291 }; 292 293 mdio@2120 { 294 qe_phy0: ethernet-phy@0 { 295 interrupt-parent = <&mpic>; 296 interrupts = <4 1 0 0>; 297 reg = <0x0>; 298 }; 299 qe_phy1: ethernet-phy@3 { 300 interrupt-parent = <&mpic>; 301 interrupts = <5 1 0 0>; 302 reg = <0x3>; 303 }; 304 tbi-phy@11 { 305 reg = <0x11>; 306 device_type = "tbi-phy"; 307 }; 308 }; 309 310 enet4: ucc@2400 { 311 device_type = "network"; 312 compatible = "ucc_geth"; 313 local-mac-address = [ 00 00 00 00 00 00 ]; 314 rx-clock-name = "none"; 315 tx-clock-name = "clk13"; 316 pio-handle = <&pio2>; 317 phy-handle = <&qe_phy1>; 318 phy-connection-type = "rmii"; 319 }; 320 }; 321}; 322 323/include/ "p1021si-post.dtsi" 324