1/*
2 * P1020 UTM-PC Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2012 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&lbc {
36	nor@0,0 {
37		#address-cells = <1>;
38		#size-cells = <1>;
39		compatible = "cfi-flash";
40		reg = <0x0 0x0 0x2000000>;
41		bank-width = <2>;
42		device-width = <1>;
43
44		partition@0 {
45			/* 256KB for DTB Image */
46			reg = <0x0 0x00040000>;
47			label = "NOR DTB Image";
48		};
49
50		partition@40000 {
51			/* 3.75 MB for Linux Kernel Image */
52			reg = <0x00040000 0x003c0000>;
53			label = "NOR Linux Kernel Image";
54		};
55
56		partition@400000 {
57			/* 27MB for Root file System */
58			reg = <0x00400000 0x01b00000>;
59			label = "NOR Root File System";
60		};
61
62		partition@1f00000 {
63			/* This location must not be altered  */
64			/* 512KB for u-boot Bootloader Image */
65			/* 512KB for u-boot Environment Variables */
66			reg = <0x01f00000 0x00100000>;
67			label = "NOR U-Boot Image";
68			read-only;
69		};
70	};
71};
72
73&soc {
74	i2c@3000 {
75		rtc@68 {
76			compatible = "dallas,ds1339";
77			reg = <0x68>;
78		};
79	};
80
81	mdio@24000 {
82		phy0: ethernet-phy@0 {
83			interrupts = <3 1 0 0>;
84			reg = <0x0>;
85		};
86		phy1: ethernet-phy@1 {
87			interrupts = <2 1 0 0>;
88			reg = <0x1>;
89		};
90		phy2: ethernet-phy@2 {
91			interrupts = <1 1 0 0>;
92			reg = <0x2>;
93		};
94	};
95
96	mdio@25000 {
97		tbi1: tbi-phy@11 {
98			reg = <0x11>;
99			device_type = "tbi-phy";
100		};
101	};
102
103	mdio@26000 {
104		tbi2: tbi-phy@11 {
105			reg = <0x11>;
106			device_type = "tbi-phy";
107		};
108	};
109
110	enet0: ethernet@b0000 {
111		phy-handle = <&phy2>;
112		phy-connection-type = "rgmii-id";
113	};
114
115	enet1: ethernet@b1000 {
116		phy-handle = <&phy0>;
117		tbi-handle = <&tbi1>;
118		phy-connection-type = "sgmii";
119	};
120
121	enet2: ethernet@b2000 {
122		phy-handle = <&phy1>;
123		phy-connection-type = "rgmii-id";
124	};
125
126	usb@22000 {
127		phy_type = "ulpi";
128	};
129
130	/* USB2 is shared with localbus, so it must be disabled
131	   by default. We can't put 'status = "disabled";' here
132	   since U-Boot doesn't clear the status property when
133	   it enables USB2. OTOH, U-Boot does create a new node
134	   when there isn't any. So, just comment it out.
135	*/
136	usb@23000 {
137		status = "disabled";
138		phy_type = "ulpi";
139	};
140};
141