1/* 2 * P1010/P1014 Silicon/SoC Device Tree Source (post include) 3 * 4 * Copyright 2011 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&ifc { 36 #address-cells = <2>; 37 #size-cells = <1>; 38 compatible = "fsl,ifc", "simple-bus"; 39 interrupts = <16 2 0 0 19 2 0 0>; 40}; 41 42/* controller at 0x9000 */ 43&pci0 { 44 compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; 45 device_type = "pci"; 46 #size-cells = <2>; 47 #address-cells = <3>; 48 bus-range = <0 255>; 49 clock-frequency = <33333333>; 50 interrupts = <16 2 0 0>; 51 52 pcie@0 { 53 reg = <0 0 0 0 0>; 54 #interrupt-cells = <1>; 55 #size-cells = <2>; 56 #address-cells = <3>; 57 device_type = "pci"; 58 interrupts = <16 2 0 0>; 59 interrupt-map-mask = <0xf800 0 0 7>; 60 interrupt-map = < 61 /* IDSEL 0x0 */ 62 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0 63 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0 64 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 65 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 66 >; 67 }; 68}; 69 70/* controller at 0xa000 */ 71&pci1 { 72 compatible = "fsl,p1010-pcie", "fsl,qoriq-pcie-v2.3"; 73 device_type = "pci"; 74 #size-cells = <2>; 75 #address-cells = <3>; 76 bus-range = <0 255>; 77 clock-frequency = <33333333>; 78 interrupts = <16 2 0 0>; 79 80 pcie@0 { 81 reg = <0 0 0 0 0>; 82 #interrupt-cells = <1>; 83 #size-cells = <2>; 84 #address-cells = <3>; 85 device_type = "pci"; 86 interrupts = <16 2 0 0>; 87 interrupt-map-mask = <0xf800 0 0 7>; 88 89 interrupt-map = < 90 /* IDSEL 0x0 */ 91 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0 92 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0 93 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0 94 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0 95 >; 96 }; 97}; 98 99&soc { 100 #address-cells = <1>; 101 #size-cells = <1>; 102 device_type = "soc"; 103 compatible = "fsl,p1010-immr", "simple-bus"; 104 bus-frequency = <0>; // Filled out by uboot. 105 106 ecm-law@0 { 107 compatible = "fsl,ecm-law"; 108 reg = <0x0 0x1000>; 109 fsl,num-laws = <12>; 110 }; 111 112 ecm@1000 { 113 compatible = "fsl,p1010-ecm", "fsl,ecm"; 114 reg = <0x1000 0x1000>; 115 interrupts = <16 2 0 0>; 116 }; 117 118 memory-controller@2000 { 119 compatible = "fsl,p1010-memory-controller"; 120 reg = <0x2000 0x1000>; 121 interrupts = <16 2 0 0>; 122 }; 123 124/include/ "pq3-i2c-0.dtsi" 125/include/ "pq3-i2c-1.dtsi" 126/include/ "pq3-duart-0.dtsi" 127/include/ "pq3-espi-0.dtsi" 128 spi0: spi@7000 { 129 fsl,espi-num-chipselects = <1>; 130 }; 131 132/include/ "pq3-gpio-0.dtsi" 133/include/ "pq3-sata2-0.dtsi" 134/include/ "pq3-sata2-1.dtsi" 135 136 can0: can@1c000 { 137 compatible = "fsl,p1010-flexcan"; 138 reg = <0x1c000 0x1000>; 139 interrupts = <48 0x2 0 0>; 140 }; 141 142 can1: can@1d000 { 143 compatible = "fsl,p1010-flexcan"; 144 reg = <0x1d000 0x1000>; 145 interrupts = <61 0x2 0 0>; 146 }; 147 148 L2: l2-cache-controller@20000 { 149 compatible = "fsl,p1010-l2-cache-controller", 150 "fsl,p1014-l2-cache-controller"; 151 reg = <0x20000 0x1000>; 152 cache-line-size = <32>; // 32 bytes 153 cache-size = <0x40000>; // L2,256K 154 interrupts = <16 2 0 0>; 155 }; 156 157/include/ "pq3-dma-0.dtsi" 158/include/ "pq3-usb2-dr-0.dtsi" 159 usb@22000 { 160 compatible = "fsl-usb2-dr-v1.6", "fsl-usb2-dr"; 161 }; 162/include/ "pq3-esdhc-0.dtsi" 163 sdhc@2e000 { 164 compatible = "fsl,p1010-esdhc", "fsl,esdhc"; 165 sdhci,auto-cmd12; 166 }; 167 168/include/ "pq3-sec4.4-0.dtsi" 169/include/ "pq3-mpic.dtsi" 170/include/ "pq3-mpic-timer-B.dtsi" 171 172/include/ "pq3-etsec2-0.dtsi" 173 enet0: ethernet@b0000 { 174 queue-group@b0000 { 175 fsl,rx-bit-map = <0xff>; 176 fsl,tx-bit-map = <0xff>; 177 }; 178 }; 179 180/include/ "pq3-etsec2-1.dtsi" 181 enet1: ethernet@b1000 { 182 queue-group@b1000 { 183 fsl,rx-bit-map = <0xff>; 184 fsl,tx-bit-map = <0xff>; 185 }; 186 }; 187 188/include/ "pq3-etsec2-2.dtsi" 189 enet2: ethernet@b2000 { 190 queue-group@b2000 { 191 fsl,rx-bit-map = <0xff>; 192 fsl,tx-bit-map = <0xff>; 193 }; 194 195 }; 196 197 global-utilities@e0000 { 198 compatible = "fsl,p1010-guts"; 199 reg = <0xe0000 0x1000>; 200 fsl,has-rstcr; 201 }; 202}; 203