1/*
2 * P1010 RDB Device Tree Source stub (no addresses or top-level ranges)
3 *
4 * Copyright 2011 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&board_ifc {
36	nor@0,0 {
37		#address-cells = <1>;
38		#size-cells = <1>;
39		compatible = "cfi-flash";
40		reg = <0x0 0x0 0x2000000>;
41		bank-width = <2>;
42		device-width = <1>;
43
44		partition@40000 {
45			/* 256KB for DTB Image */
46			reg = <0x00040000 0x00040000>;
47			label = "NOR DTB Image";
48		};
49
50		partition@80000 {
51			/* 7 MB for Linux Kernel Image */
52			reg = <0x00080000 0x00700000>;
53			label = "NOR Linux Kernel Image";
54		};
55
56		partition@800000 {
57			/* 20MB for JFFS2 based Root file System */
58			reg = <0x00800000 0x01400000>;
59			label = "NOR JFFS2 Root File System";
60		};
61
62		partition@1f00000 {
63			/* This location must not be altered  */
64			/* 512KB for u-boot Bootloader Image */
65			/* 512KB for u-boot Environment Variables */
66			reg = <0x01f00000 0x00100000>;
67			label = "NOR U-Boot Image";
68			read-only;
69		};
70	};
71
72	ifc_nand: nand@1,0 {
73		#address-cells = <1>;
74		#size-cells = <1>;
75		compatible = "fsl,ifc-nand";
76		reg = <0x1 0x0 0x10000>;
77	};
78
79	cpld@3,0 {
80		#address-cells = <1>;
81		#size-cells = <1>;
82		compatible = "fsl,p1010rdb-cpld";
83		reg = <0x3 0x0 0x0000020>;
84		bank-width = <1>;
85		device-width = <1>;
86	};
87};
88
89&board_soc {
90	i2c@3000 {
91		eeprom@50 {
92			compatible = "st,24c256";
93			reg = <0x50>;
94		};
95
96		rtc@68 {
97			compatible = "pericom,pt7c4338";
98			reg = <0x68>;
99		};
100	};
101
102	i2c@3100 {
103		eeprom@52 {
104			compatible = "atmel,24c01";
105			reg = <0x52>;
106		};
107	};
108
109	spi@7000 {
110		flash@0 {
111			#address-cells = <1>;
112			#size-cells = <1>;
113			compatible = "spansion,s25sl12801";
114			reg = <0>;
115			spi-max-frequency = <40000000>;
116
117			partition@0 {
118				/* 1MB for u-boot Bootloader Image */
119				/* 1MB for Environment */
120				reg = <0x0 0x00100000>;
121				label = "SPI Flash U-Boot Image";
122				read-only;
123			};
124
125			partition@100000 {
126				/* 512KB for DTB Image */
127				reg = <0x00100000 0x00080000>;
128				label = "SPI Flash DTB Image";
129			};
130
131			partition@180000 {
132				/* 4MB for Linux Kernel Image */
133				reg = <0x00180000 0x00400000>;
134				label = "SPI Flash Linux Kernel Image";
135			};
136
137			partition@580000 {
138				/* 4MB for Compressed RFS Image */
139				reg = <0x00580000 0x00400000>;
140				label = "SPI Flash Compressed RFSImage";
141			};
142
143			partition@980000 {
144				/* 6.5MB for JFFS2 based RFS */
145				reg = <0x00980000 0x00680000>;
146				label = "SPI Flash JFFS2 RFS";
147			};
148		};
149	};
150
151	usb@22000 {
152		phy_type = "utmi";
153		dr_mode = "host";
154	};
155
156	mdio@24000 {
157		phy0: ethernet-phy@0 {
158			reg = <0x1>;
159		};
160
161		phy1: ethernet-phy@1 {
162			reg = <0x0>;
163		};
164
165		phy2: ethernet-phy@2 {
166			reg = <0x2>;
167		};
168
169		tbi-phy@3 {
170			device_type = "tbi-phy";
171			reg = <0x3>;
172		};
173	};
174
175	mdio@25000 {
176		tbi0: tbi-phy@11 {
177			reg = <0x11>;
178			device_type = "tbi-phy";
179		};
180	};
181
182	mdio@26000 {
183		tbi1: tbi-phy@11 {
184			reg = <0x11>;
185			device_type = "tbi-phy";
186		};
187	};
188
189	ptp_clock@b0e00 {
190		compatible = "fsl,etsec-ptp";
191		reg = <0xb0e00 0xb0>;
192		interrupts = <68 2 0 0 69 2 0 0>;
193		fsl,tclk-period	= <10>;
194		fsl,tmr-prsc	= <2>;
195		fsl,tmr-add	= <0x80000016>;
196		fsl,tmr-fiper1	= <999999990>;
197		fsl,tmr-fiper2	= <99990>;
198		fsl,max-adj	= <199999999>;
199	};
200
201	enet0: ethernet@b0000 {
202		phy-handle = <&phy0>;
203		phy-connection-type = "rgmii-id";
204	};
205
206	enet1: ethernet@b1000 {
207		phy-handle = <&phy1>;
208		tbi-handle = <&tbi0>;
209		phy-connection-type = "sgmii";
210	};
211
212	enet2: ethernet@b2000 {
213		phy-handle = <&phy2>;
214		tbi-handle = <&tbi1>;
215		phy-connection-type = "sgmii";
216	};
217};
218
219&pci0 {
220	pcie@0 {
221		interrupt-map = <
222			/* IDSEL 0x0 */
223			/*
224			 *irq[4:5] are active-high
225			 *irq[6:7] are active-low
226			 */
227			0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0
228			0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0
229			0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
230			0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
231			>;
232	};
233};
234