1/* 2 * P1010 RDB Device Tree Source stub (no addresses or top-level ranges) 3 * 4 * Copyright 2011 Freescale Semiconductor Inc. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions are met: 8 * * Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * * Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * * Neither the name of Freescale Semiconductor nor the 14 * names of its contributors may be used to endorse or promote products 15 * derived from this software without specific prior written permission. 16 * 17 * 18 * ALTERNATIVELY, this software may be distributed under the terms of the 19 * GNU General Public License ("GPL") as published by the Free Software 20 * Foundation, either version 2 of that License or (at your option) any 21 * later version. 22 * 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35&board_ifc { 36 nor@0,0 { 37 #address-cells = <1>; 38 #size-cells = <1>; 39 compatible = "cfi-flash"; 40 reg = <0x0 0x0 0x2000000>; 41 bank-width = <2>; 42 device-width = <1>; 43 44 partition@40000 { 45 /* 256KB for DTB Image */ 46 reg = <0x00040000 0x00040000>; 47 label = "NOR DTB Image"; 48 }; 49 50 partition@80000 { 51 /* 7 MB for Linux Kernel Image */ 52 reg = <0x00080000 0x00700000>; 53 label = "NOR Linux Kernel Image"; 54 }; 55 56 partition@800000 { 57 /* 20MB for JFFS2 based Root file System */ 58 reg = <0x00800000 0x01400000>; 59 label = "NOR JFFS2 Root File System"; 60 }; 61 62 partition@1f00000 { 63 /* This location must not be altered */ 64 /* 512KB for u-boot Bootloader Image */ 65 /* 512KB for u-boot Environment Variables */ 66 reg = <0x01f00000 0x00100000>; 67 label = "NOR U-Boot Image"; 68 read-only; 69 }; 70 }; 71 72 ifc_nand: nand@1,0 { 73 #address-cells = <1>; 74 #size-cells = <1>; 75 compatible = "fsl,ifc-nand"; 76 reg = <0x1 0x0 0x10000>; 77 }; 78 79 cpld@3,0 { 80 #address-cells = <1>; 81 #size-cells = <1>; 82 compatible = "fsl,p1010rdb-cpld"; 83 reg = <0x3 0x0 0x0000020>; 84 bank-width = <1>; 85 device-width = <1>; 86 }; 87}; 88 89&board_soc { 90 i2c@3000 { 91 eeprom@50 { 92 compatible = "st,24c256", "atmel,24c256"; 93 reg = <0x50>; 94 }; 95 96 rtc@68 { 97 compatible = "pericom,pt7c4338"; 98 reg = <0x68>; 99 }; 100 }; 101 102 i2c@3100 { 103 eeprom@52 { 104 compatible = "atmel,24c01"; 105 reg = <0x52>; 106 }; 107 }; 108 109 spi@7000 { 110 flash@0 { 111 #address-cells = <1>; 112 #size-cells = <1>; 113 compatible = "spansion,s25sl12801", "jedec,spi-nor"; 114 reg = <0>; 115 spi-max-frequency = <40000000>; 116 117 partition@0 { 118 /* 1MB for u-boot Bootloader Image */ 119 /* 1MB for Environment */ 120 reg = <0x0 0x00100000>; 121 label = "SPI Flash U-Boot Image"; 122 read-only; 123 }; 124 125 partition@100000 { 126 /* 512KB for DTB Image */ 127 reg = <0x00100000 0x00080000>; 128 label = "SPI Flash DTB Image"; 129 }; 130 131 partition@180000 { 132 /* 4MB for Linux Kernel Image */ 133 reg = <0x00180000 0x00400000>; 134 label = "SPI Flash Linux Kernel Image"; 135 }; 136 137 partition@580000 { 138 /* 4MB for Compressed RFS Image */ 139 reg = <0x00580000 0x00400000>; 140 label = "SPI Flash Compressed RFSImage"; 141 }; 142 143 partition@980000 { 144 /* 6.5MB for JFFS2 based RFS */ 145 reg = <0x00980000 0x00680000>; 146 label = "SPI Flash JFFS2 RFS"; 147 }; 148 }; 149 }; 150 151 usb@22000 { 152 phy_type = "utmi"; 153 dr_mode = "host"; 154 }; 155 156 mdio@24000 { 157 phy0: ethernet-phy@0 { 158 reg = <0x1>; 159 }; 160 161 phy1: ethernet-phy@1 { 162 reg = <0x0>; 163 }; 164 165 phy2: ethernet-phy@2 { 166 reg = <0x2>; 167 }; 168 169 tbi-phy@3 { 170 device_type = "tbi-phy"; 171 reg = <0x3>; 172 }; 173 }; 174 175 mdio@25000 { 176 tbi0: tbi-phy@11 { 177 reg = <0x11>; 178 device_type = "tbi-phy"; 179 }; 180 }; 181 182 mdio@26000 { 183 tbi1: tbi-phy@11 { 184 reg = <0x11>; 185 device_type = "tbi-phy"; 186 }; 187 }; 188 189 ptp_clock@b0e00 { 190 compatible = "fsl,etsec-ptp"; 191 reg = <0xb0e00 0xb0>; 192 interrupts = <68 2 0 0 69 2 0 0>; 193 fsl,tclk-period = <10>; 194 fsl,tmr-prsc = <2>; 195 fsl,tmr-add = <0x80000016>; 196 fsl,tmr-fiper1 = <999999990>; 197 fsl,tmr-fiper2 = <99990>; 198 fsl,max-adj = <199999999>; 199 }; 200 201 enet0: ethernet@b0000 { 202 phy-handle = <&phy0>; 203 phy-connection-type = "rgmii-id"; 204 }; 205 206 enet1: ethernet@b1000 { 207 phy-handle = <&phy1>; 208 tbi-handle = <&tbi0>; 209 phy-connection-type = "sgmii"; 210 }; 211 212 enet2: ethernet@b2000 { 213 phy-handle = <&phy2>; 214 tbi-handle = <&tbi1>; 215 phy-connection-type = "sgmii"; 216 }; 217}; 218 219&pci0 { 220 pcie@0 { 221 interrupt-map = < 222 /* IDSEL 0x0 */ 223 /* 224 *irq[4:5] are active-high 225 *irq[6:7] are active-low 226 */ 227 0000 0x0 0x0 0x1 &mpic 0x4 0x2 0x0 0x0 228 0000 0x0 0x0 0x2 &mpic 0x5 0x2 0x0 0x0 229 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0 230 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0 231 >; 232 }; 233}; 234