1/* 2 * Keymile kmcoge4 Device Tree Source, based on the P2041RDB DTS 3 * 4 * (C) Copyright 2014 5 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com 6 * 7 * Copyright 2011 Freescale Semiconductor Inc. 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or (at your 12 * option) any later version. 13 */ 14 15/include/ "p2041si-pre.dtsi" 16 17/ { 18 model = "keymile,kmcoge4"; 19 compatible = "keymile,kmcoge4", "keymile,kmp204x"; 20 #address-cells = <2>; 21 #size-cells = <2>; 22 interrupt-parent = <&mpic>; 23 24 memory { 25 device_type = "memory"; 26 }; 27 28 reserved-memory { 29 #address-cells = <2>; 30 #size-cells = <2>; 31 ranges; 32 33 bman_fbpr: bman-fbpr { 34 size = <0 0x1000000>; 35 alignment = <0 0x1000000>; 36 }; 37 qman_fqd: qman-fqd { 38 size = <0 0x400000>; 39 alignment = <0 0x400000>; 40 }; 41 qman_pfdr: qman-pfdr { 42 size = <0 0x2000000>; 43 alignment = <0 0x2000000>; 44 }; 45 }; 46 47 dcsr: dcsr@f00000000 { 48 ranges = <0x00000000 0xf 0x00000000 0x01008000>; 49 }; 50 51 bportals: bman-portals@ff4000000 { 52 ranges = <0x0 0xf 0xf4000000 0x200000>; 53 }; 54 55 qportals: qman-portals@ff4200000 { 56 ranges = <0x0 0xf 0xf4200000 0x200000>; 57 }; 58 59 soc: soc@ffe000000 { 60 ranges = <0x00000000 0xf 0xfe000000 0x1000000>; 61 reg = <0xf 0xfe000000 0 0x00001000>; 62 spi@110000 { 63 flash@0 { 64 #address-cells = <1>; 65 #size-cells = <1>; 66 compatible = "spansion,s25fl256s1"; 67 reg = <0>; 68 spi-max-frequency = <20000000>; /* input clock */ 69 }; 70 71 network_clock@1 { 72 compatible = "zarlink,zl30343"; 73 reg = <1>; 74 spi-max-frequency = <8000000>; 75 }; 76 77 flash@2 { 78 #address-cells = <1>; 79 #size-cells = <1>; 80 compatible = "micron,m25p32"; 81 reg = <2>; 82 spi-max-frequency = <15000000>; 83 }; 84 }; 85 86 i2c@119000 { 87 status = "disabled"; 88 }; 89 90 i2c@119100 { 91 status = "disabled"; 92 }; 93 94 usb0: usb@210000 { 95 status = "disabled"; 96 }; 97 98 usb1: usb@211000 { 99 status = "disabled"; 100 }; 101 102 sata@220000 { 103 status = "disabled"; 104 }; 105 106 sata@221000 { 107 status = "disabled"; 108 }; 109 }; 110 111 rio: rapidio@ffe0c0000 { 112 status = "disabled"; 113 }; 114 115 lbc: localbus@ffe124000 { 116 reg = <0xf 0xfe124000 0 0x1000>; 117 ranges = <0 0 0xf 0xffa00000 0x00040000 /* LB 0 */ 118 1 0 0xf 0xfb000000 0x00010000 /* LB 1 */ 119 2 0 0xf 0xd0000000 0x10000000 /* LB 2 */ 120 3 0 0xf 0xe0000000 0x10000000>; /* LB 3 */ 121 122 nand@0,0 { 123 #address-cells = <1>; 124 #size-cells = <1>; 125 compatible = "fsl,elbc-fcm-nand"; 126 reg = <0 0 0x40000>; 127 }; 128 129 board-control@1,0 { 130 compatible = "keymile,qriox"; 131 reg = <1 0 0x80>; 132 }; 133 134 chassis-mgmt@3,0 { 135 compatible = "keymile,bfticu"; 136 interrupt-controller; 137 #interrupt-cells = <2>; 138 reg = <3 0 0x100>; 139 interrupt-parent = <&mpic>; 140 interrupts = <6 1 0 0>; 141 }; 142 }; 143 144 pci0: pcie@ffe200000 { 145 reg = <0xf 0xfe200000 0 0x1000>; 146 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 147 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; 148 pcie@0 { 149 ranges = <0x02000000 0 0xe0000000 150 0x02000000 0 0xe0000000 151 0 0x20000000 152 153 0x01000000 0 0x00000000 154 0x01000000 0 0x00000000 155 0 0x00010000>; 156 }; 157 }; 158 159 pci1: pcie@ffe201000 { 160 status = "disabled"; 161 }; 162 163 pci2: pcie@ffe202000 { 164 reg = <0xf 0xfe202000 0 0x1000>; 165 ranges = <0x02000000 0 0xe0000000 0xc 0x20000000 0 0x20000000 166 0x01000000 0 0x00000000 0xf 0xf8010000 0 0x00010000>; 167 pcie@0 { 168 ranges = <0x02000000 0 0xe0000000 169 0x02000000 0 0xe0000000 170 0 0x20000000 171 172 0x01000000 0 0x00000000 173 0x01000000 0 0x00000000 174 0 0x00010000>; 175 }; 176 }; 177}; 178 179/include/ "p2041si-post.dtsi" 180