1/* 2 * Keymile kmcent2 Device Tree Source, based on T1040RDB DTS 3 * 4 * (C) Copyright 2016 5 * Valentin Longchamp, Keymile AG, valentin.longchamp@keymile.com 6 * 7 * Copyright 2014 - 2015 Freescale Semiconductor Inc. 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or (at your 12 * option) any later version. 13 */ 14 15/include/ "t104xsi-pre.dtsi" 16 17/ { 18 model = "keymile,kmcent2"; 19 compatible = "keymile,kmcent2"; 20 21 aliases { 22 front_phy = &front_phy; 23 }; 24 25 reserved-memory { 26 #address-cells = <2>; 27 #size-cells = <2>; 28 ranges; 29 30 bman_fbpr: bman-fbpr { 31 size = <0 0x1000000>; 32 alignment = <0 0x1000000>; 33 }; 34 qman_fqd: qman-fqd { 35 size = <0 0x400000>; 36 alignment = <0 0x400000>; 37 }; 38 qman_pfdr: qman-pfdr { 39 size = <0 0x2000000>; 40 alignment = <0 0x2000000>; 41 }; 42 }; 43 44 ifc: localbus@ffe124000 { 45 reg = <0xf 0xfe124000 0 0x2000>; 46 ranges = <0 0 0xf 0xe8000000 0x04000000 47 1 0 0xf 0xfa000000 0x00010000 48 2 0 0xf 0xfb000000 0x00010000 49 4 0 0xf 0xc0000000 0x08000000 50 6 0 0xf 0xd0000000 0x08000000 51 7 0 0xf 0xd8000000 0x08000000>; 52 53 nor@0,0 { 54 #address-cells = <1>; 55 #size-cells = <1>; 56 compatible = "cfi-flash"; 57 reg = <0x0 0x0 0x04000000>; 58 bank-width = <2>; 59 device-width = <2>; 60 }; 61 62 nand@1,0 { 63 #address-cells = <1>; 64 #size-cells = <1>; 65 compatible = "fsl,ifc-nand"; 66 reg = <0x1 0x0 0x10000>; 67 }; 68 69 board-control@2,0 { 70 compatible = "keymile,qriox"; 71 reg = <0x2 0x0 0x80>; 72 }; 73 74 chassis-mgmt@6,0 { 75 compatible = "keymile,bfticu"; 76 reg = <6 0 0x100>; 77 interrupt-controller; 78 interrupt-parent = <&mpic>; 79 interrupts = <11 1 0 0>; 80 #interrupt-cells = <1>; 81 }; 82 83 }; 84 85 memory { 86 device_type = "memory"; 87 }; 88 89 dcsr: dcsr@f00000000 { 90 ranges = <0x00000000 0xf 0x00000000 0x01072000>; 91 }; 92 93 bportals: bman-portals@ff4000000 { 94 ranges = <0x0 0xf 0xf4000000 0x2000000>; 95 }; 96 97 qportals: qman-portals@ff6000000 { 98 ranges = <0x0 0xf 0xf6000000 0x2000000>; 99 }; 100 101 soc: soc@ffe000000 { 102 ranges = <0x00000000 0xf 0xfe000000 0x1000000>; 103 reg = <0xf 0xfe000000 0 0x00001000>; 104 105 spi@110000 { 106 network-clock@1 { 107 compatible = "zarlink,zl30364"; 108 reg = <1>; 109 spi-max-frequency = <1000000>; 110 }; 111 }; 112 113 sdhc@114000 { 114 status = "disabled"; 115 }; 116 117 i2c@118000 { 118 clock-frequency = <100000>; 119 120 mux@70 { 121 compatible = "nxp,pca9547"; 122 reg = <0x70>; 123 #address-cells = <1>; 124 #size-cells = <0>; 125 i2c-mux-idle-disconnect; 126 127 i2c@0 { 128 reg = <0>; 129 #address-cells = <1>; 130 #size-cells = <0>; 131 132 eeprom@54 { 133 compatible = "atmel,24c02"; 134 reg = <0x54>; 135 pagesize = <2>; 136 read-only; 137 label = "ddr3-spd"; 138 }; 139 }; 140 141 i2c@7 { 142 reg = <7>; 143 #address-cells = <1>; 144 #size-cells = <0>; 145 146 temp-sensor@48 { 147 compatible = "national,lm75"; 148 reg = <0x48>; 149 label = "SENSOR_0"; 150 }; 151 temp-sensor@4a { 152 compatible = "national,lm75"; 153 reg = <0x4a>; 154 label = "SENSOR_2"; 155 }; 156 temp-sensor@4b { 157 compatible = "national,lm75"; 158 reg = <0x4b>; 159 label = "SENSOR_3"; 160 }; 161 }; 162 }; 163 }; 164 165 i2c@118100 { 166 clock-frequency = <100000>; 167 168 eeprom@50 { 169 compatible = "atmel,24c08"; 170 reg = <0x50>; 171 pagesize = <16>; 172 }; 173 174 eeprom@54 { 175 compatible = "atmel,24c08"; 176 reg = <0x54>; 177 pagesize = <16>; 178 }; 179 }; 180 181 i2c@119000 { 182 status = "disabled"; 183 }; 184 185 i2c@119100 { 186 status = "disabled"; 187 }; 188 189 serial2: serial@11d500 { 190 status = "disabled"; 191 }; 192 193 serial3: serial@11d600 { 194 status = "disabled"; 195 }; 196 197 usb0: usb@210000 { 198 status = "disabled"; 199 }; 200 usb1: usb@211000 { 201 status = "disabled"; 202 }; 203 204 display@180000 { 205 status = "disabled"; 206 }; 207 208 sata@220000 { 209 status = "disabled"; 210 }; 211 sata@221000 { 212 status = "disabled"; 213 }; 214 215 fman@400000 { 216 ethernet@e0000 { 217 fixed-link = <0 1 1000 0 0>; 218 phy-connection-type = "sgmii"; 219 }; 220 221 ethernet@e2000 { 222 fixed-link = <1 1 1000 0 0>; 223 phy-connection-type = "sgmii"; 224 }; 225 226 ethernet@e4000 { 227 status = "disabled"; 228 }; 229 230 ethernet@e6000 { 231 status = "disabled"; 232 }; 233 234 ethernet@e8000 { 235 phy-handle = <&front_phy>; 236 phy-connection-type = "rgmii"; 237 }; 238 239 mdio0: mdio@fc000 { 240 front_phy: ethernet-phy@11 { 241 reg = <0x11>; 242 }; 243 }; 244 }; 245 }; 246 247 248 pci0: pcie@ffe240000 { 249 reg = <0xf 0xfe240000 0 0x10000>; 250 ranges = <0x02000000 0 0xe0000000 0xc 0x00000000 0x0 0x20000000 251 0x01000000 0 0x00000000 0xf 0xf8000000 0x0 0x00010000>; 252 pcie@0 { 253 ranges = <0x02000000 0 0xe0000000 254 0x02000000 0 0xe0000000 255 0 0x20000000 256 257 0x01000000 0 0x00000000 258 0x01000000 0 0x00000000 259 0 0x00010000>; 260 }; 261 }; 262 263 pci1: pcie@ffe250000 { 264 status = "disabled"; 265 }; 266 267 pci2: pcie@ffe260000 { 268 status = "disabled"; 269 }; 270 271 pci3: pcie@ffe270000 { 272 status = "disabled"; 273 }; 274 275 qe: qe@ffe140000 { 276 ranges = <0x0 0xf 0xfe140000 0x40000>; 277 reg = <0xf 0xfe140000 0 0x480>; 278 brg-frequency = <0>; 279 bus-frequency = <0>; 280 281 si1: si@700 { 282 compatible = "fsl,t1040-qe-si"; 283 reg = <0x700 0x80>; 284 }; 285 286 siram1: siram@1000 { 287 compatible = "fsl,t1040-qe-siram"; 288 reg = <0x1000 0x800>; 289 }; 290 291 ucc_hdlc: ucc@2000 { 292 device_type = "hdlc"; 293 compatible = "fsl,ucc-hdlc"; 294 rx-clock-name = "clk9"; 295 tx-clock-name = "clk9"; 296 fsl,hdlc-bus; 297 }; 298 }; 299}; 300 301#include "t1040si-post.dtsi" 302