1/*
2 * BSC9132 Silicon/SoC Device Tree Source (post include)
3 *
4 * Copyright 2014 Freescale Semiconductor Inc.
5 *
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions are met:
8 *     * Redistributions of source code must retain the above copyright
9 *       notice, this list of conditions and the following disclaimer.
10 *     * Redistributions in binary form must reproduce the above copyright
11 *       notice, this list of conditions and the following disclaimer in the
12 *       documentation and/or other materials provided with the distribution.
13 *     * Neither the name of Freescale Semiconductor nor the
14 *       names of its contributors may be used to endorse or promote products
15 *       derived from this software without specific prior written permission.
16 *
17 *
18 * ALTERNATIVELY, this software may be distributed under the terms of the
19 * GNU General Public License ("GPL") as published by the Free Software
20 * Foundation, either version 2 of that License or (at your option) any
21 * later version.
22 *
23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
33 */
34
35&ifc {
36	#address-cells = <2>;
37	#size-cells = <1>;
38	compatible = "fsl,ifc", "simple-bus";
39	/* FIXME: Test whether interrupts are split */
40	interrupts = <16 2 0 0 20 2 0 0>;
41};
42
43/* controller at 0xa000 */
44&pci0 {
45	compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2";
46	device_type = "pci";
47	#size-cells = <2>;
48	#address-cells = <3>;
49	bus-range = <0 255>;
50	interrupts = <16 2 0 0>;
51
52	pcie@0 {
53		reg = <0 0 0 0 0>;
54		#interrupt-cells = <1>;
55		#size-cells = <2>;
56		#address-cells = <3>;
57		device_type = "pci";
58		interrupts = <16 2 0 0>;
59		interrupt-map-mask = <0xf800 0 0 7>;
60
61		interrupt-map = <
62			/* IDSEL 0x0 */
63			0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0
64			0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0
65			0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0
66			0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0
67			>;
68	};
69};
70
71&soc {
72	#address-cells = <1>;
73	#size-cells = <1>;
74	device_type = "soc";
75	compatible = "fsl,bsc9132-immr", "simple-bus";
76	bus-frequency = <0>;		// Filled out by uboot.
77
78	ecm-law@0 {
79		compatible = "fsl,ecm-law";
80		reg = <0x0 0x1000>;
81		fsl,num-laws = <12>;
82	};
83
84	ecm@1000 {
85		compatible = "fsl,bsc9132-ecm", "fsl,ecm";
86		reg = <0x1000 0x1000>;
87		interrupts = <16 2 0 0>;
88	};
89
90	memory-controller@2000 {
91		compatible = "fsl,bsc9132-memory-controller";
92		reg = <0x2000 0x1000>;
93		interrupts = <16 2 1 8>;
94	};
95
96/include/ "pq3-i2c-0.dtsi"
97	i2c@3000 {
98		interrupts = <17 2 0 0>;
99	};
100
101/include/ "pq3-i2c-1.dtsi"
102	i2c@3100 {
103		interrupts = <17 2 0 0>;
104	};
105
106/include/ "pq3-duart-0.dtsi"
107	serial0: serial@4500 {
108		interrupts = <18 2 0 0>;
109	};
110
111	serial1: serial@4600 {
112		interrupts = <18 2 0 0 >;
113	};
114/include/ "pq3-espi-0.dtsi"
115	spi0: spi@7000 {
116		fsl,espi-num-chipselects = <1>;
117		interrupts = <22 0x2 0 0>;
118	};
119
120/include/ "pq3-gpio-0.dtsi"
121	gpio-controller@f000 {
122		interrupts = <19 0x2 0 0>;
123		};
124
125	L2: l2-cache-controller@20000 {
126		compatible = "fsl,bsc9132-l2-cache-controller";
127		reg = <0x20000 0x1000>;
128		cache-line-size = <32>;	// 32 bytes
129		cache-size = <0x40000>; // L2,256K
130		interrupts = <16 2 1 0>;
131	};
132
133/include/ "pq3-dma-0.dtsi"
134
135dma@21300 {
136
137	dma-channel@0 {
138		interrupts = <62 2 0 0>;
139	};
140
141	dma-channel@80 {
142		interrupts = <63 2 0 0>;
143	};
144
145	dma-channel@100 {
146		interrupts = <64 2 0 0>;
147	};
148
149	dma-channel@180 {
150		interrupts = <65 2 0 0>;
151	};
152};
153
154/include/ "pq3-usb2-dr-0.dtsi"
155usb@22000 {
156	compatible = "fsl-usb2-dr","fsl-usb2-dr-v2.2";
157	interrupts = <40 0x2 0 0>;
158};
159
160/include/ "pq3-esdhc-0.dtsi"
161	sdhc@2e000 {
162		fsl,sdhci-auto-cmd12;
163		interrupts = <41 0x2 0 0>;
164	};
165
166/include/ "pq3-sec4.4-0.dtsi"
167crypto@30000 {
168	interrupts	 = <57 2 0 0>;
169
170	sec_jr0: jr@1000 {
171		interrupts	 = <58 2 0 0>;
172	};
173
174	sec_jr1: jr@2000 {
175		interrupts	 = <59 2 0 0>;
176	};
177
178	sec_jr2: jr@3000 {
179		interrupts	 = <60 2 0 0>;
180	};
181
182	sec_jr3: jr@4000 {
183		interrupts	 = <61 2 0 0>;
184	};
185};
186
187/include/ "pq3-mpic.dtsi"
188/include/ "pq3-mpic-timer-B.dtsi"
189
190/include/ "pq3-etsec2-0.dtsi"
191enet0: ethernet@b0000 {
192	queue-group@b0000 {
193		fsl,rx-bit-map = <0xff>;
194		fsl,tx-bit-map = <0xff>;
195		interrupts = <26 2 0 0 27 2 0 0 28 2 0 0>;
196	};
197};
198
199/include/ "pq3-etsec2-1.dtsi"
200enet1: ethernet@b1000 {
201	queue-group@b1000 {
202		fsl,rx-bit-map = <0xff>;
203		fsl,tx-bit-map = <0xff>;
204		interrupts = <33 2 0 0 34 2 0 0 35 2 0 0>;
205	};
206};
207
208global-utilities@e0000 {
209		compatible = "fsl,bsc9132-guts";
210		reg = <0xe0000 0x1000>;
211		fsl,has-rstcr;
212	};
213};
214