1/*
2 * Analogue & Micro ASP8347 Device Tree Source
3 *
4 * Copyright 2008 Codehermit
5 *
6 * This program is free software; you can redistribute  it and/or modify it
7 * under  the terms of  the GNU General  Public License as published by the
8 * Free Software Foundation;  either version 2 of the  License, or (at your
9 * option) any later version.
10 */
11
12/dts-v1/;
13
14/ {
15	model = "Analogue & Micro ASP8347E";
16	compatible = "analogue-and-micro,asp8347e";
17	#address-cells = <1>;
18	#size-cells = <1>;
19
20	aliases {
21		ethernet0 = &enet0;
22		ethernet1 = &enet1;
23		serial0 = &serial0;
24		serial1 = &serial1;
25	};
26
27	cpus {
28		#address-cells = <1>;
29		#size-cells = <0>;
30
31		PowerPC,8347@0 {
32			device_type = "cpu";
33			reg = <0x0>;
34			d-cache-line-size = <32>;
35			i-cache-line-size = <32>;
36			d-cache-size = <32768>;
37			i-cache-size = <32768>;
38			timebase-frequency = <0>;	// from bootloader
39			bus-frequency = <0>;		// from bootloader
40			clock-frequency = <0>;		// from bootloader
41		};
42	};
43
44	memory {
45		device_type = "memory";
46		reg = <0x00000000 0x8000000>;	// 128MB at 0
47	};
48
49	localbus@ff005000 {
50		#address-cells = <2>;
51		#size-cells = <1>;
52		compatible = "fsl,mpc8347e-localbus",
53			     "fsl,pq2pro-localbus",
54			     "simple-bus";
55		reg = <0xff005000 0x1000>;
56		interrupts = <77 0x8>;
57		interrupt-parent = <&ipic>;
58
59		ranges = <
60			0 0 0xf0000000 0x02000000
61		>;
62
63		flash@0,0 {
64			compatible = "cfi-flash";
65			reg = <0 0 0x02000000>;
66			bank-width = <2>;
67			device-width = <2>;
68		};
69	};
70
71	soc8349@ff000000 {
72		#address-cells = <1>;
73		#size-cells = <1>;
74		device_type = "soc";
75		ranges = <0x0 0xff000000 0x00100000>;
76		reg = <0xff000000 0x00000200>;
77		bus-frequency = <0>;
78
79		wdt@200 {
80			device_type = "watchdog";
81			compatible = "mpc83xx_wdt";
82			reg = <0x200 0x100>;
83		};
84
85		i2c@3000 {
86			#address-cells = <1>;
87			#size-cells = <0>;
88			cell-index = <0>;
89			compatible = "fsl-i2c";
90			reg = <0x3000 0x100>;
91			interrupts = <14 0x8>;
92			interrupt-parent = <&ipic>;
93			dfsrr;
94
95			rtc@68 {
96				compatible = "dallas,ds1374";
97				reg = <0x68>;
98			};
99		};
100
101		i2c@3100 {
102			#address-cells = <1>;
103			#size-cells = <0>;
104			cell-index = <1>;
105			compatible = "fsl-i2c";
106			reg = <0x3100 0x100>;
107			interrupts = <15 0x8>;
108			interrupt-parent = <&ipic>;
109			dfsrr;
110		};
111
112		spi@7000 {
113			cell-index = <0>;
114			compatible = "fsl,spi";
115			reg = <0x7000 0x1000>;
116			interrupts = <16 0x8>;
117			interrupt-parent = <&ipic>;
118			mode = "cpu";
119		};
120
121		dma@82a8 {
122			#address-cells = <1>;
123			#size-cells = <1>;
124			compatible = "fsl,mpc8347-dma", "fsl,elo-dma";
125			reg = <0x82a8 4>;
126			ranges = <0 0x8100 0x1a8>;
127			interrupt-parent = <&ipic>;
128			interrupts = <71 8>;
129			cell-index = <0>;
130			dma-channel@0 {
131				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
132				reg = <0 0x80>;
133				cell-index = <0>;
134				interrupt-parent = <&ipic>;
135				interrupts = <71 8>;
136			};
137			dma-channel@80 {
138				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
139				reg = <0x80 0x80>;
140				cell-index = <1>;
141				interrupt-parent = <&ipic>;
142				interrupts = <71 8>;
143			};
144			dma-channel@100 {
145				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
146				reg = <0x100 0x80>;
147				cell-index = <2>;
148				interrupt-parent = <&ipic>;
149				interrupts = <71 8>;
150			};
151			dma-channel@180 {
152				compatible = "fsl,mpc8347-dma-channel", "fsl,elo-dma-channel";
153				reg = <0x180 0x28>;
154				cell-index = <3>;
155				interrupt-parent = <&ipic>;
156				interrupts = <71 8>;
157			};
158		};
159
160		/* phy type (ULPI or SERIAL) are only types supported for MPH */
161		/* port = 0 or 1 */
162		usb@22000 {
163			compatible = "fsl-usb2-mph";
164			reg = <0x22000 0x1000>;
165			#address-cells = <1>;
166			#size-cells = <0>;
167			interrupt-parent = <&ipic>;
168			interrupts = <39 0x8>;
169			phy_type = "ulpi";
170			port0;
171		};
172		/* phy type (ULPI, UTMI, UTMI_WIDE, SERIAL) */
173		usb@23000 {
174			compatible = "fsl-usb2-dr";
175			reg = <0x23000 0x1000>;
176			#address-cells = <1>;
177			#size-cells = <0>;
178			interrupt-parent = <&ipic>;
179			interrupts = <38 0x8>;
180			dr_mode = "otg";
181			phy_type = "ulpi";
182		};
183
184		enet0: ethernet@24000 {
185			#address-cells = <1>;
186			#size-cells = <1>;
187			cell-index = <0>;
188			device_type = "network";
189			model = "TSEC";
190			compatible = "gianfar";
191			reg = <0x24000 0x1000>;
192			ranges = <0x0 0x24000 0x1000>;
193			local-mac-address = [ 00 08 e5 11 32 33 ];
194			interrupts = <32 0x8 33 0x8 34 0x8>;
195			interrupt-parent = <&ipic>;
196			tbi-handle = <&tbi0>;
197			phy-handle = <&phy0>;
198			linux,network-index = <0>;
199
200			mdio@520 {
201				#address-cells = <1>;
202				#size-cells = <0>;
203				compatible = "fsl,gianfar-mdio";
204				reg = <0x520 0x20>;
205
206				phy0: ethernet-phy@0 {
207					interrupt-parent = <&ipic>;
208					interrupts = <17 0x8>;
209					reg = <0x1>;
210				};
211
212				phy1: ethernet-phy@1 {
213					interrupt-parent = <&ipic>;
214					interrupts = <18 0x8>;
215					reg = <0x2>;
216				};
217
218				tbi0: tbi-phy@11 {
219					reg = <0x11>;
220					device_type = "tbi-phy";
221				};
222			};
223		};
224
225		enet1: ethernet@25000 {
226			#address-cells = <1>;
227			#size-cells = <1>;
228			cell-index = <1>;
229			device_type = "network";
230			model = "TSEC";
231			compatible = "gianfar";
232			reg = <0x25000 0x1000>;
233			ranges = <0x0 0x25000 0x1000>;
234			local-mac-address = [ 00 08 e5 11 32 34 ];
235			interrupts = <35 0x8 36 0x8 37 0x8>;
236			interrupt-parent = <&ipic>;
237			tbi-handle = <&tbi1>;
238			phy-handle = <&phy1>;
239			linux,network-index = <1>;
240
241			mdio@520 {
242				#address-cells = <1>;
243				#size-cells = <0>;
244				compatible = "fsl,gianfar-tbi";
245				reg = <0x520 0x20>;
246
247				tbi1: tbi-phy@11 {
248					reg = <0x11>;
249					device_type = "tbi-phy";
250				};
251			};
252		};
253
254		serial0: serial@4500 {
255			cell-index = <0>;
256			device_type = "serial";
257			compatible = "fsl,ns16550", "ns16550";
258			reg = <0x4500 0x100>;
259			clock-frequency = <400000000>;
260			interrupts = <9 0x8>;
261			interrupt-parent = <&ipic>;
262		};
263
264		serial1: serial@4600 {
265			cell-index = <1>;
266			device_type = "serial";
267			compatible = "fsl,ns16550", "ns16550";
268			reg = <0x4600 0x100>;
269			clock-frequency = <400000000>;
270			interrupts = <10 0x8>;
271			interrupt-parent = <&ipic>;
272		};
273
274		/* May need to remove if on a part without crypto engine */
275		crypto@30000 {
276			device_type = "crypto";
277			model = "SEC2";
278			compatible = "talitos";
279			reg = <0x30000 0x10000>;
280			interrupts = <11 0x8>;
281			interrupt-parent = <&ipic>;
282			num-channels = <4>;
283			channel-fifo-len = <24>;
284			exec-units-mask = <0x0000007e>;
285			/* desc mask is for rev2.0,
286			 * we need runtime fixup for >2.0 */
287			descriptor-types-mask = <0x01010ebf>;
288		};
289
290		/* IPIC
291		 * interrupts cell = <intr #, sense>
292		 * sense values match linux IORESOURCE_IRQ_* defines:
293		 * sense == 8: Level, low assertion
294		 * sense == 2: Edge, high-to-low change
295		 */
296		ipic: pic@700 {
297			interrupt-controller;
298			#address-cells = <0>;
299			#interrupt-cells = <2>;
300			reg = <0x700 0x100>;
301			device_type = "ipic";
302		};
303	};
304
305	chosen {
306		bootargs = "console=ttyS0,38400 root=/dev/mtdblock3 rootfstype=jffs2";
307		stdout-path = &serial0;
308	};
309
310};
311