1# SPDX-License-Identifier: GPL-2.0 2# Makefile for making ELF bootable images for booting on CHRP 3# using Open Firmware. 4# 5# Geert Uytterhoeven September 1997 6# 7# Based on coffboot by Paul Mackerras 8# Simplified for ppc64 by Todd Inglett 9# 10# NOTE: this code may be built for 32 bit in ELF32 format even though 11# it packages a 64 bit kernel. We do this to simplify the 12# bootloader and increase compatibility with OpenFirmware. 13# 14# To this end we need to define BOOTCC, etc, as the tools 15# needed to build the 32 bit image. That's normally the same 16# compiler for the rest of the kernel, with the -m32 flag added. 17# To make it easier to setup a cross compiler, 18# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE 19# in the toplevel makefile. 20 21all: $(obj)/zImage 22 23ifdef CROSS32_COMPILE 24ifdef CONFIG_CC_IS_CLANG 25 BOOTCC := $(CROSS32_COMPILE)clang 26else 27 BOOTCC := $(CROSS32_COMPILE)gcc 28endif 29 BOOTAR := $(CROSS32_COMPILE)ar 30else 31 BOOTCC := $(CC) 32 BOOTAR := $(AR) 33endif 34 35BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ 36 -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \ 37 -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ 38 -include $(srctree)/include/linux/compiler_attributes.h \ 39 $(LINUXINCLUDE) 40 41ifdef CONFIG_PPC64_BOOT_WRAPPER 42BOOTCFLAGS += -m64 43else 44BOOTCFLAGS += -m32 45endif 46 47BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) 48 49ifdef CONFIG_CPU_BIG_ENDIAN 50BOOTCFLAGS += -mbig-endian 51else 52BOOTCFLAGS += -mlittle-endian 53BOOTCFLAGS += $(call cc-option,-mabi=elfv2) 54endif 55 56BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -nostdinc 57 58BOOTARFLAGS := -crD 59 60ifdef CONFIG_CC_IS_CLANG 61BOOTCFLAGS += $(CLANG_FLAGS) 62BOOTAFLAGS += $(CLANG_FLAGS) 63endif 64 65ifdef CONFIG_DEBUG_INFO 66BOOTCFLAGS += -g 67endif 68 69ifeq ($(call cc-option-yn, -fstack-protector),y) 70BOOTCFLAGS += -fno-stack-protector 71endif 72 73BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) 74 75DTC_FLAGS ?= -p 1024 76 77$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 78$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 79$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 80$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 81$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 82$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 83$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 84$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 85$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 86 87# The pre-boot decompressors pull in a lot of kernel headers and other source 88# files. This creates a bit of a dependency headache since we need to copy 89# these files into the build dir, fix up any includes and ensure that dependent 90# files are copied in the right order. 91 92# these need to be seperate variables because they are copied out of different 93# directories in the kernel tree. Sure you COULd merge them, but it's a 94# cure-is-worse-than-disease situation. 95zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c 96zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c 97zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h 98zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h 99 100$(addprefix $(obj)/, decompress.o): \ 101 $(addprefix $(obj)/,$(zlib-decomp-y)) 102 103$(addprefix $(obj)/, $(zlib-decomp-y)): \ 104 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 105 $(addprefix $(obj)/,$(zlibheader-y)) \ 106 $(addprefix $(obj)/,$(zlib-y)) 107 108$(addprefix $(obj)/,$(zlib-y)): \ 109 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 110 $(addprefix $(obj)/,$(zlibheader-y)) 111 112libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c 113libfdtheader := fdt.h libfdt.h libfdt_internal.h 114 115$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ 116 treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ 117 $(addprefix $(obj)/,$(libfdtheader)) 118 119src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ 120 $(libfdt) libfdt-wrapper.c \ 121 ns16550.c serial.c simple_alloc.c div64.S util.S \ 122 elf_util.c $(zlib-y) devtree.c stdlib.c \ 123 oflib.c ofconsole.c cuboot.c 124 125src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c 126src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S opal.c 127ifndef CONFIG_PPC64_BOOT_WRAPPER 128src-wlib-y += crtsavres.S 129endif 130src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c 131src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c 132src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c 133src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c 134src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c 135src-wlib-$(CONFIG_CPM) += cpm-serial.c 136 137src-plat-y := of.c epapr.c 138src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \ 139 cuboot-acadia.c \ 140 cuboot-kilauea.c simpleboot.c 141src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ 142 cuboot-bamboo.c cuboot-sam440ep.c \ 143 cuboot-sequoia.c cuboot-rainier.c \ 144 cuboot-taishan.c cuboot-katmai.c \ 145 cuboot-warp.c cuboot-yosemite.c \ 146 treeboot-iss4xx.c treeboot-currituck.c \ 147 treeboot-akebono.c \ 148 simpleboot.c fixed-head.S 149src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c 150src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c 151src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c 152src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c 153src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c 154src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ 155 gamecube-head.S gamecube.c \ 156 wii-head.S wii.c holly.c \ 157 fixed-head.S mvme5100.c 158src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c 159src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c 160src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c 161src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S 162src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S 163src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S 164src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c 165 166src-wlib := $(sort $(src-wlib-y)) 167src-plat := $(sort $(src-plat-y)) 168src-boot := $(src-wlib) $(src-plat) empty.c 169 170src-boot := $(addprefix $(obj)/, $(src-boot)) 171obj-boot := $(addsuffix .o, $(basename $(src-boot))) 172obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) 173obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) 174obj-plat: $(libfdt) 175 176quiet_cmd_copy_kern_src = COPY $@ 177 cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ 178 179$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 180 $(call cmd,copy_kern_src) 181 182$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 183 $(call cmd,copy_kern_src) 184 185$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% 186 $(call cmd,copy_kern_src) 187 188$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% 189 $(call cmd,copy_kern_src) 190 191quiet_cmd_copy_libfdt = COPY $@ 192 cmd_copy_libfdt = cp $< $@ 193 194$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% 195 $(call cmd,copy_libfdt) 196 197$(obj)/empty.c: 198 $(Q)touch $@ 199 200$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S 201 $(Q)cp $< $@ 202 203clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ 204 $(zlib-decomp-) $(libfdt) $(libfdtheader) \ 205 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds 206 207quiet_cmd_bootcc = BOOTCC $@ 208 cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< 209 210quiet_cmd_bootas = BOOTAS $@ 211 cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< 212 213quiet_cmd_bootar = BOOTAR $@ 214 cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ 215 216$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE 217 $(call if_changed_dep,bootcc) 218$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE 219 $(Q)mkdir -p $(dir $@) 220 $(call if_changed_dep,bootcc) 221$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE 222 $(Q)mkdir -p $(dir $@) 223 $(call if_changed_dep,bootas) 224 225$(obj)/wrapper.a: $(obj-wlib) FORCE 226 $(call if_changed,bootar) 227 228hostprogs := addnote hack-coff mktree 229 230targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) 231extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ 232 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds 233 234dtstree := $(srctree)/$(src)/dts 235 236wrapper :=$(srctree)/$(src)/wrapper 237wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ 238 $(wrapper) FORCE 239 240############# 241# Bits for building various flavours of zImage 242 243ifneq ($(CROSS32_COMPILE),) 244CROSSWRAP := -C "$(CROSS32_COMPILE)" 245else 246ifneq ($(CROSS_COMPILE),) 247CROSSWRAP := -C "$(CROSS_COMPILE)" 248endif 249endif 250 251compressor-$(CONFIG_KERNEL_GZIP) := gz 252compressor-$(CONFIG_KERNEL_XZ) := xz 253compressor-$(CONFIG_KERNEL_LZMA) := lzma 254compressor-$(CONFIG_KERNEL_LZO) := lzo 255 256# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd 257quiet_cmd_wrap = WRAP $@ 258 cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ 259 $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ 260 vmlinux 261 262image-$(CONFIG_PPC_PSERIES) += zImage.pseries 263image-$(CONFIG_PPC_POWERNV) += zImage.pseries 264image-$(CONFIG_PPC_MAPLE) += zImage.maple 265image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries 266image-$(CONFIG_PPC_PS3) += dtbImage.ps3 267image-$(CONFIG_PPC_CHRP) += zImage.chrp 268image-$(CONFIG_PPC_EFIKA) += zImage.chrp 269image-$(CONFIG_PPC_PMAC) += zImage.pmac 270image-$(CONFIG_PPC_HOLLY) += dtbImage.holly 271image-$(CONFIG_DEFAULT_UIMAGE) += uImage 272image-$(CONFIG_EPAPR_BOOT) += zImage.epapr 273 274# 275# Targets which embed a device tree blob 276# 277# Theses are default targets to build images which embed device tree blobs. 278# They are only required on boards which do not have FDT support in firmware. 279# Boards with newish u-boot firmware can use the uImage target above 280# 281 282# Board ports in arch/powerpc/platform/40x/Kconfig 283image-$(CONFIG_HOTFOOT) += cuImage.hotfoot 284image-$(CONFIG_ACADIA) += cuImage.acadia 285image-$(CONFIG_OBS600) += uImage.obs600 286 287# Board ports in arch/powerpc/platform/44x/Kconfig 288image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony 289image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo 290image-$(CONFIG_SAM440EP) += cuImage.sam440ep 291image-$(CONFIG_SEQUOIA) += cuImage.sequoia 292image-$(CONFIG_RAINIER) += cuImage.rainier 293image-$(CONFIG_TAISHAN) += cuImage.taishan 294image-$(CONFIG_KATMAI) += cuImage.katmai 295image-$(CONFIG_WARP) += cuImage.warp 296image-$(CONFIG_YOSEMITE) += cuImage.yosemite 297image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ 298 treeImage.iss4xx-mpic 299image-$(CONFIG_CURRITUCK) += treeImage.currituck 300image-$(CONFIG_AKEBONO) += treeImage.akebono 301 302# Board ports in arch/powerpc/platform/8xx/Kconfig 303image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads 304image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads 305image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc 306image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ 307 dtbImage.adder875-redboot 308 309# Board ports in arch/powerpc/platform/52xx/Kconfig 310image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 311image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b 312image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 313 314# Board ports in arch/powerpc/platform/82xx/Kconfig 315image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads 316image-$(CONFIG_PQ2FADS) += cuImage.pq2fads 317image-$(CONFIG_EP8248E) += dtbImage.ep8248e 318 319# Board ports in arch/powerpc/platform/83xx/Kconfig 320image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds 321image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb 322image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ 323 cuImage.mpc8349emitxgp 324image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds 325image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds 326image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot 327 328# Board ports in arch/powerpc/platform/85xx/Kconfig 329image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads 330image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads 331image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ 332 cuImage.mpc8548cds_32b \ 333 cuImage.mpc8555cds 334image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds 335image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ 336 cuImage.mpc8572ds 337image-$(CONFIG_TQM8540) += cuImage.tqm8540 338image-$(CONFIG_TQM8541) += cuImage.tqm8541 339image-$(CONFIG_TQM8548) += cuImage.tqm8548 340image-$(CONFIG_TQM8555) += cuImage.tqm8555 341image-$(CONFIG_TQM8560) += cuImage.tqm8560 342image-$(CONFIG_SBC8548) += cuImage.sbc8548 343image-$(CONFIG_KSI8560) += cuImage.ksi8560 344 345# Board ports in arch/powerpc/platform/86xx/Kconfig 346image-$(CONFIG_MVME7100) += dtbImage.mvme7100 347 348# Board ports in arch/powerpc/platform/embedded6xx/Kconfig 349image-$(CONFIG_STORCENTER) += cuImage.storcenter 350image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 351image-$(CONFIG_GAMECUBE) += dtbImage.gamecube 352image-$(CONFIG_WII) += dtbImage.wii 353image-$(CONFIG_MVME5100) += dtbImage.mvme5100 354 355# Board port in arch/powerpc/platform/amigaone/Kconfig 356image-$(CONFIG_AMIGAONE) += cuImage.amigaone 357 358# For 32-bit powermacs, build the COFF and miboot images 359# as well as the ELF images. 360ifdef CONFIG_PPC32 361image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot 362endif 363 364# Allow extra targets to be added to the defconfig 365image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS)) 366 367initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) 368initrd-y := $(patsubst zImage%, zImage.initrd%, \ 369 $(patsubst dtbImage%, dtbImage.initrd%, \ 370 $(patsubst simpleImage%, simpleImage.initrd%, \ 371 $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) 372initrd-y := $(filter-out $(image-y), $(initrd-y)) 373targets += $(image-y) $(initrd-y) 374targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ 375 $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y)))) 376 377$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz 378 379# Don't put the ramdisk on the pattern rule; when its missing make will try 380# the pattern rule with less dependencies that also matches (even with the 381# hard dependency listed). 382$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE 383 $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) 384 385$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE 386 $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) 387 388# dtbImage% - a dtbImage is a zImage with an embedded device tree blob 389$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 390 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 391 392$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 393 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb) 394 395# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) 396# prefix 397$(obj)/vmlinux.strip: vmlinux 398 $(STRIP) -s -R .comment $< -o $@ 399 400$(obj)/uImage: vmlinux $(wrapperbits) FORCE 401 $(call if_changed,wrap,uboot) 402 403$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 404 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 405 406$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 407 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) 408 409$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 410 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 411 412$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 413 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb) 414 415$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 416 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 417 418$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 419 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb) 420 421$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 422 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 423 424$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 425 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb) 426 427# Needed for the above targets to work with dts/fsl/ files 428$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb 429 @cp $< $@ 430 431# If there isn't a platform selected then just strip the vmlinux. 432ifeq (,$(image-y)) 433image-y := vmlinux.strip 434endif 435 436$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) 437 $(Q)rm -f $@; ln $< $@ 438$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) 439 $(Q)rm -f $@; ln $< $@ 440 441# Only install the vmlinux 442install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) 443 sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" 444 445# Install the vmlinux and other built boot targets. 446zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) 447 sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^ 448 449PHONY += install zInstall 450 451# anything not in $(targets) 452clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ 453 zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ 454 zImage.miboot zImage.pmac zImage.pseries \ 455 zImage.maple simpleImage.* otheros.bld 456 457# clean up files cached by wrapper 458clean-kernel-base := vmlinux.strip vmlinux.bin 459clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) 460clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) 461# If not absolute clean-files are relative to $(obj). 462clean-files += $(addprefix $(objtree)/, $(clean-kernel)) 463 464WRAPPER_OBJDIR := /usr/lib/kernel-wrapper 465WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts 466WRAPPER_BINDIR := /usr/sbin 467INSTALL := install 468 469extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) 470hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) 471wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper 472dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) 473 474all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) 475 476quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) 477 cmd_mkdir = mkdir -p $@ 478 479quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) 480 cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ 481 482quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) 483 cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ 484 485quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 486 cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ 487 488quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 489 cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ 490 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ 491 -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ 492 493 494$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): 495 $(call cmd,mkdir) 496 497$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) 498 $(call cmd,install) 499 500$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) 501 $(call cmd,install_exe) 502 503$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) 504 $(call cmd,install_dts) 505 506$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) 507 $(call cmd,install_wrapper) 508 509$(obj)/bootwrapper_install: $(all-installed) 510