1# SPDX-License-Identifier: GPL-2.0 2# Makefile for making ELF bootable images for booting on CHRP 3# using Open Firmware. 4# 5# Geert Uytterhoeven September 1997 6# 7# Based on coffboot by Paul Mackerras 8# Simplified for ppc64 by Todd Inglett 9# 10# NOTE: this code may be built for 32 bit in ELF32 format even though 11# it packages a 64 bit kernel. We do this to simplify the 12# bootloader and increase compatibility with OpenFirmware. 13# 14# To this end we need to define BOOTCC, etc, as the tools 15# needed to build the 32 bit image. That's normally the same 16# compiler for the rest of the kernel, with the -m32 flag added. 17# To make it easier to setup a cross compiler, 18# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE 19# in the toplevel makefile. 20 21all: $(obj)/zImage 22 23ifdef CROSS32_COMPILE 24ifdef CONFIG_CC_IS_CLANG 25 BOOTCC := $(CROSS32_COMPILE)clang 26else 27 BOOTCC := $(CROSS32_COMPILE)gcc 28endif 29 BOOTAR := $(CROSS32_COMPILE)ar 30else 31 BOOTCC := $(CC) 32 BOOTAR := $(AR) 33endif 34 35BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ 36 -fno-strict-aliasing -O2 -msoft-float -mno-altivec -mno-vsx \ 37 -pipe -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ 38 $(LINUXINCLUDE) 39 40ifdef CONFIG_PPC64_BOOT_WRAPPER 41BOOTCFLAGS += -m64 42else 43BOOTCFLAGS += -m32 44endif 45 46BOOTCFLAGS += -isystem $(shell $(BOOTCC) -print-file-name=include) 47 48ifdef CONFIG_CPU_BIG_ENDIAN 49BOOTCFLAGS += -mbig-endian 50else 51BOOTCFLAGS += -mlittle-endian 52BOOTCFLAGS += $(call cc-option,-mabi=elfv2) 53endif 54 55BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -nostdinc 56 57BOOTARFLAGS := -crD 58 59ifdef CONFIG_CC_IS_CLANG 60BOOTCFLAGS += $(CLANG_FLAGS) 61BOOTAFLAGS += $(CLANG_FLAGS) 62endif 63 64ifdef CONFIG_DEBUG_INFO 65BOOTCFLAGS += -g 66endif 67 68ifeq ($(call cc-option-yn, -fstack-protector),y) 69BOOTCFLAGS += -fno-stack-protector 70endif 71 72BOOTCFLAGS += -include $(srctree)/include/linux/compiler_attributes.h 73BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) 74 75DTC_FLAGS ?= -p 1024 76 77$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 78$(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 79$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 80$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 81$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 82$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 83$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 84$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 85$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 86 87# The pre-boot decompressors pull in a lot of kernel headers and other source 88# files. This creates a bit of a dependency headache since we need to copy 89# these files into the build dir, fix up any includes and ensure that dependent 90# files are copied in the right order. 91 92# these need to be seperate variables because they are copied out of different 93# directories in the kernel tree. Sure you COULd merge them, but it's a 94# cure-is-worse-than-disease situation. 95zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c 96zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c 97zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h 98zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h 99 100$(addprefix $(obj)/, decompress.o): \ 101 $(addprefix $(obj)/,$(zlib-decomp-y)) 102 103$(addprefix $(obj)/, $(zlib-decomp-y)): \ 104 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 105 $(addprefix $(obj)/,$(zlibheader-y)) \ 106 $(addprefix $(obj)/,$(zlib-y)) 107 108$(addprefix $(obj)/,$(zlib-y)): \ 109 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 110 $(addprefix $(obj)/,$(zlibheader-y)) 111 112libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c 113libfdtheader := fdt.h libfdt.h libfdt_internal.h 114 115$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o \ 116 treeboot-akebono.o treeboot-currituck.o treeboot-iss4xx.o): \ 117 $(addprefix $(obj)/,$(libfdtheader)) 118 119src-wlib-y := string.S crt0.S stdio.c decompress.c main.c \ 120 $(libfdt) libfdt-wrapper.c \ 121 ns16550.c serial.c simple_alloc.c div64.S util.S \ 122 elf_util.c $(zlib-y) devtree.c stdlib.c \ 123 oflib.c ofconsole.c cuboot.c 124 125src-wlib-$(CONFIG_PPC_MPC52xx) += mpc52xx-psc.c 126src-wlib-$(CONFIG_PPC_POWERNV) += opal-calls.S opal.c 127ifndef CONFIG_PPC64_BOOT_WRAPPER 128src-wlib-y += crtsavres.S 129endif 130src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c 131src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c 132src-wlib-$(CONFIG_PPC_8xx) += mpc8xx.c planetcore.c fsl-soc.c 133src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c 134src-wlib-$(CONFIG_EMBEDDED6xx) += ugecon.c fsl-soc.c 135src-wlib-$(CONFIG_CPM) += cpm-serial.c 136 137src-plat-y := of.c epapr.c 138src-plat-$(CONFIG_40x) += fixed-head.S cuboot-hotfoot.c \ 139 cuboot-acadia.c \ 140 cuboot-kilauea.c simpleboot.c 141src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ 142 cuboot-bamboo.c cuboot-sam440ep.c \ 143 cuboot-sequoia.c cuboot-rainier.c \ 144 cuboot-taishan.c cuboot-katmai.c \ 145 cuboot-warp.c cuboot-yosemite.c \ 146 treeboot-iss4xx.c treeboot-currituck.c \ 147 treeboot-akebono.c \ 148 simpleboot.c fixed-head.S 149src-plat-$(CONFIG_PPC_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c 150src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c 151src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c 152src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c 153src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c 154src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ 155 gamecube-head.S gamecube.c \ 156 wii-head.S wii.c holly.c \ 157 fixed-head.S mvme5100.c 158src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c 159src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c 160src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c 161src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S 162src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S 163src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S 164src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c 165 166src-plat-$(CONFIG_PPC_MICROWATT) += fixed-head.S microwatt.c 167 168src-wlib := $(sort $(src-wlib-y)) 169src-plat := $(sort $(src-plat-y)) 170src-boot := $(src-wlib) $(src-plat) empty.c 171 172src-boot := $(addprefix $(obj)/, $(src-boot)) 173obj-boot := $(addsuffix .o, $(basename $(src-boot))) 174obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) 175obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) 176obj-plat: $(libfdt) 177 178quiet_cmd_copy_kern_src = COPY $@ 179 cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ 180 181$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 182 $(call cmd,copy_kern_src) 183 184$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 185 $(call cmd,copy_kern_src) 186 187$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% 188 $(call cmd,copy_kern_src) 189 190$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% 191 $(call cmd,copy_kern_src) 192 193quiet_cmd_copy_libfdt = COPY $@ 194 cmd_copy_libfdt = cp $< $@ 195 196$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% 197 $(call cmd,copy_libfdt) 198 199$(obj)/empty.c: 200 $(Q)touch $@ 201 202$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S 203 $(Q)cp $< $@ 204 205clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ 206 $(zlib-decomp-) $(libfdt) $(libfdtheader) \ 207 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds 208 209quiet_cmd_bootcc = BOOTCC $@ 210 cmd_bootcc = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< 211 212quiet_cmd_bootas = BOOTAS $@ 213 cmd_bootas = $(BOOTCC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< 214 215quiet_cmd_bootar = BOOTAR $@ 216 cmd_bootar = $(BOOTAR) $(BOOTARFLAGS) $@.$$$$ $(real-prereqs); mv $@.$$$$ $@ 217 218$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE 219 $(call if_changed_dep,bootcc) 220$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE 221 $(Q)mkdir -p $(dir $@) 222 $(call if_changed_dep,bootcc) 223$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE 224 $(Q)mkdir -p $(dir $@) 225 $(call if_changed_dep,bootas) 226 227$(obj)/wrapper.a: $(obj-wlib) FORCE 228 $(call if_changed,bootar) 229 230hostprogs := addnote hack-coff mktree 231 232targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds 233extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ 234 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds 235 236dtstree := $(srctree)/$(src)/dts 237 238wrapper :=$(srctree)/$(src)/wrapper 239wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ 240 $(wrapper) FORCE 241 242############# 243# Bits for building various flavours of zImage 244 245ifneq ($(CROSS32_COMPILE),) 246CROSSWRAP := -C "$(CROSS32_COMPILE)" 247else 248ifneq ($(CROSS_COMPILE),) 249CROSSWRAP := -C "$(CROSS_COMPILE)" 250endif 251endif 252 253compressor-$(CONFIG_KERNEL_GZIP) := gz 254compressor-$(CONFIG_KERNEL_XZ) := xz 255compressor-$(CONFIG_KERNEL_LZMA) := lzma 256compressor-$(CONFIG_KERNEL_LZO) := lzo 257 258# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd 259quiet_cmd_wrap = WRAP $@ 260 cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ 261 $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ 262 vmlinux 263 264image-$(CONFIG_PPC_PSERIES) += zImage.pseries 265image-$(CONFIG_PPC_POWERNV) += zImage.pseries 266image-$(CONFIG_PPC_MAPLE) += zImage.maple 267image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries 268image-$(CONFIG_PPC_PS3) += dtbImage.ps3 269image-$(CONFIG_PPC_CHRP) += zImage.chrp 270image-$(CONFIG_PPC_EFIKA) += zImage.chrp 271image-$(CONFIG_PPC_PMAC) += zImage.pmac 272image-$(CONFIG_PPC_HOLLY) += dtbImage.holly 273image-$(CONFIG_DEFAULT_UIMAGE) += uImage 274image-$(CONFIG_EPAPR_BOOT) += zImage.epapr 275 276# 277# Targets which embed a device tree blob 278# 279# Theses are default targets to build images which embed device tree blobs. 280# They are only required on boards which do not have FDT support in firmware. 281# Boards with newish u-boot firmware can use the uImage target above 282# 283 284# Board ports in arch/powerpc/platform/40x/Kconfig 285image-$(CONFIG_HOTFOOT) += cuImage.hotfoot 286image-$(CONFIG_ACADIA) += cuImage.acadia 287image-$(CONFIG_OBS600) += uImage.obs600 288 289# Board ports in arch/powerpc/platform/44x/Kconfig 290image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony 291image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo 292image-$(CONFIG_SAM440EP) += cuImage.sam440ep 293image-$(CONFIG_SEQUOIA) += cuImage.sequoia 294image-$(CONFIG_RAINIER) += cuImage.rainier 295image-$(CONFIG_TAISHAN) += cuImage.taishan 296image-$(CONFIG_KATMAI) += cuImage.katmai 297image-$(CONFIG_WARP) += cuImage.warp 298image-$(CONFIG_YOSEMITE) += cuImage.yosemite 299image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ 300 treeImage.iss4xx-mpic 301image-$(CONFIG_CURRITUCK) += treeImage.currituck 302image-$(CONFIG_AKEBONO) += treeImage.akebono 303 304# Board ports in arch/powerpc/platform/8xx/Kconfig 305image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads 306image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads 307image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc 308image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ 309 dtbImage.adder875-redboot 310 311# Board ports in arch/powerpc/platform/52xx/Kconfig 312image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 313image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b 314image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 315 316# Board ports in arch/powerpc/platform/82xx/Kconfig 317image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads 318image-$(CONFIG_PQ2FADS) += cuImage.pq2fads 319image-$(CONFIG_EP8248E) += dtbImage.ep8248e 320 321# Board ports in arch/powerpc/platform/83xx/Kconfig 322image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds 323image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb 324image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ 325 cuImage.mpc8349emitxgp 326image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds 327image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds 328image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot 329 330# Board ports in arch/powerpc/platform/85xx/Kconfig 331image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads 332image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads 333image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ 334 cuImage.mpc8548cds_32b \ 335 cuImage.mpc8555cds 336image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds 337image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ 338 cuImage.mpc8572ds 339image-$(CONFIG_TQM8540) += cuImage.tqm8540 340image-$(CONFIG_TQM8541) += cuImage.tqm8541 341image-$(CONFIG_TQM8548) += cuImage.tqm8548 342image-$(CONFIG_TQM8555) += cuImage.tqm8555 343image-$(CONFIG_TQM8560) += cuImage.tqm8560 344image-$(CONFIG_KSI8560) += cuImage.ksi8560 345 346# Board ports in arch/powerpc/platform/86xx/Kconfig 347image-$(CONFIG_MVME7100) += dtbImage.mvme7100 348 349# Board ports in arch/powerpc/platform/embedded6xx/Kconfig 350image-$(CONFIG_STORCENTER) += cuImage.storcenter 351image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 352image-$(CONFIG_GAMECUBE) += dtbImage.gamecube 353image-$(CONFIG_WII) += dtbImage.wii 354image-$(CONFIG_MVME5100) += dtbImage.mvme5100 355 356# Board port in arch/powerpc/platform/amigaone/Kconfig 357image-$(CONFIG_AMIGAONE) += cuImage.amigaone 358 359image-$(CONFIG_PPC_MICROWATT) += dtbImage.microwatt 360 361# For 32-bit powermacs, build the COFF and miboot images 362# as well as the ELF images. 363ifdef CONFIG_PPC32 364image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot 365endif 366 367# Allow extra targets to be added to the defconfig 368image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS)) 369 370initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) 371initrd-y := $(patsubst zImage%, zImage.initrd%, \ 372 $(patsubst dtbImage%, dtbImage.initrd%, \ 373 $(patsubst simpleImage%, simpleImage.initrd%, \ 374 $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) 375initrd-y := $(filter-out $(image-y), $(initrd-y)) 376targets += $(image-y) $(initrd-y) 377targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ 378 $(patsubst $(x).%, dts/%.dtb, $(filter $(x).%, $(image-y)))) 379targets += $(foreach x, dtbImage uImage cuImage simpleImage treeImage, \ 380 $(patsubst $(x).%, dts/fsl/%.dtb, $(filter $(x).%, $(image-y)))) 381 382$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz 383 384# Don't put the ramdisk on the pattern rule; when its missing make will try 385# the pattern rule with less dependencies that also matches (even with the 386# hard dependency listed). 387$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE 388 $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) 389 390$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE 391 $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) 392 393# dtbImage% - a dtbImage is a zImage with an embedded device tree blob 394$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 395 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 396 397$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/dts/%.dtb FORCE 398 $(call if_changed,wrap,$*,,$(obj)/dts/$*.dtb) 399 400# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) 401# prefix 402$(obj)/vmlinux.strip: vmlinux 403 $(STRIP) -s -R .comment $< -o $@ 404 405$(obj)/uImage: vmlinux $(wrapperbits) FORCE 406 $(call if_changed,wrap,uboot) 407 408$(obj)/uImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 409 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 410 411$(obj)/uImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 412 $(call if_changed,wrap,uboot-$*,,$(obj)/dts/$*.dtb) 413 414$(obj)/cuImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 415 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 416 417$(obj)/cuImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 418 $(call if_changed,wrap,cuboot-$*,,$(obj)/dts/$*.dtb) 419 420$(obj)/simpleImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 421 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 422 423$(obj)/simpleImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 424 $(call if_changed,wrap,simpleboot-$*,,$(obj)/dts/$*.dtb) 425 426$(obj)/treeImage.initrd.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 427 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb,$(obj)/ramdisk.image.gz) 428 429$(obj)/treeImage.%: vmlinux $(obj)/dts/%.dtb $(wrapperbits) FORCE 430 $(call if_changed,wrap,treeboot-$*,,$(obj)/dts/$*.dtb) 431 432# Needed for the above targets to work with dts/fsl/ files 433$(obj)/dts/%.dtb: $(obj)/dts/fsl/%.dtb 434 @cp $< $@ 435 436# If there isn't a platform selected then just strip the vmlinux. 437ifeq (,$(image-y)) 438image-y := vmlinux.strip 439endif 440 441$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) 442 $(Q)rm -f $@; ln $< $@ 443$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) 444 $(Q)rm -f $@; ln $< $@ 445 446# anything not in $(targets) 447clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ 448 zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ 449 zImage.miboot zImage.pmac zImage.pseries \ 450 zImage.maple simpleImage.* otheros.bld 451 452# clean up files cached by wrapper 453clean-kernel-base := vmlinux.strip vmlinux.bin 454clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) 455clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) 456# If not absolute clean-files are relative to $(obj). 457clean-files += $(addprefix $(objtree)/, $(clean-kernel)) 458 459WRAPPER_OBJDIR := /usr/lib/kernel-wrapper 460WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts 461WRAPPER_BINDIR := /usr/sbin 462INSTALL := install 463 464extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) 465hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs)) 466wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper 467dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) 468 469all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) 470 471quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) 472 cmd_mkdir = mkdir -p $@ 473 474quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) 475 cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ 476 477quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) 478 cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ 479 480quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 481 cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ 482 483quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 484 cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ 485 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ 486 -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ 487 488 489$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): 490 $(call cmd,mkdir) 491 492$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) 493 $(call cmd,install) 494 495$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) 496 $(call cmd,install_exe) 497 498$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) 499 $(call cmd,install_dts) 500 501$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) 502 $(call cmd,install_wrapper) 503 504$(obj)/bootwrapper_install: $(all-installed) 505