1# Makefile for making ELF bootable images for booting on CHRP 2# using Open Firmware. 3# 4# Geert Uytterhoeven September 1997 5# 6# Based on coffboot by Paul Mackerras 7# Simplified for ppc64 by Todd Inglett 8# 9# NOTE: this code is built for 32 bit in ELF32 format even though 10# it packages a 64 bit kernel. We do this to simplify the 11# bootloader and increase compatibility with OpenFirmware. 12# 13# To this end we need to define BOOTCC, etc, as the tools 14# needed to build the 32 bit image. That's normally the same 15# compiler for the rest of the kernel, with the -m32 flag added. 16# To make it easier to setup a cross compiler, 17# CROSS32_COMPILE is setup as a prefix just like CROSS_COMPILE 18# in the toplevel makefile. 19 20all: $(obj)/zImage 21 22compress-$(CONFIG_KERNEL_GZIP) := CONFIG_KERNEL_GZIP 23compress-$(CONFIG_KERNEL_XZ) := CONFIG_KERNEL_XZ 24 25BOOTCFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \ 26 -fno-strict-aliasing -Os -msoft-float -pipe \ 27 -fomit-frame-pointer -fno-builtin -fPIC -nostdinc \ 28 -isystem $(shell $(CROSS32CC) -print-file-name=include) \ 29 -D$(compress-y) 30 31ifdef CONFIG_PPC64_BOOT_WRAPPER 32BOOTCFLAGS += -m64 33endif 34ifdef CONFIG_CPU_BIG_ENDIAN 35BOOTCFLAGS += -mbig-endian 36else 37BOOTCFLAGS += -mlittle-endian 38BOOTCFLAGS += $(call cc-option,-mabi=elfv2) 39endif 40 41BOOTAFLAGS := -D__ASSEMBLY__ $(BOOTCFLAGS) -traditional -nostdinc 42 43ifdef CONFIG_DEBUG_INFO 44BOOTCFLAGS += -g 45endif 46 47ifeq ($(call cc-option-yn, -fstack-protector),y) 48BOOTCFLAGS += -fno-stack-protector 49endif 50 51BOOTCFLAGS += -I$(objtree)/$(obj) -I$(srctree)/$(obj) 52 53DTC_FLAGS ?= -p 1024 54 55$(obj)/4xx.o: BOOTCFLAGS += -mcpu=405 56$(obj)/ebony.o: BOOTCFLAGS += -mcpu=405 57$(obj)/cuboot-hotfoot.o: BOOTCFLAGS += -mcpu=405 58$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=405 59$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=405 60$(obj)/cuboot-acadia.o: BOOTCFLAGS += -mcpu=405 61$(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 62$(obj)/treeboot-iss4xx.o: BOOTCFLAGS += -mcpu=405 63$(obj)/treeboot-currituck.o: BOOTCFLAGS += -mcpu=405 64$(obj)/treeboot-akebono.o: BOOTCFLAGS += -mcpu=405 65$(obj)/virtex405-head.o: BOOTAFLAGS += -mcpu=405 66 67# The pre-boot decompressors pull in a lot of kernel headers and other source 68# files. This creates a bit of a dependency headache since we need to copy 69# these files into the build dir, fix up any includes and ensure that dependent 70# files are copied in the right order. 71 72# these need to be seperate variables because they are copied out of different 73# directories in the kernel tree. Sure you COULd merge them, but it's a 74# cure-is-worse-than-disease situation. 75zlib-decomp-$(CONFIG_KERNEL_GZIP) := decompress_inflate.c 76zlib-$(CONFIG_KERNEL_GZIP) := inffast.c inflate.c inftrees.c 77zlibheader-$(CONFIG_KERNEL_GZIP) := inffast.h inffixed.h inflate.h inftrees.h infutil.h 78zliblinuxheader-$(CONFIG_KERNEL_GZIP) := zlib.h zconf.h zutil.h 79 80$(addprefix $(obj)/, decompress.o): \ 81 $(addprefix $(obj)/,$(zlib-decomp-y)) 82 83$(addprefix $(obj)/, $(zlib-decomp-y)): \ 84 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 85 $(addprefix $(obj)/,$(zlibheader-y)) \ 86 $(addprefix $(obj)/,$(zlib-y)) 87 88$(addprefix $(obj)/,$(zlib-y)): \ 89 $(addprefix $(obj)/,$(zliblinuxheader-y)) \ 90 $(addprefix $(obj)/,$(zlibheader-y)) 91 92libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c 93libfdtheader := fdt.h libfdt.h libfdt_internal.h 94 95$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o epapr.o opal.o): \ 96 $(addprefix $(obj)/,$(libfdtheader)) 97 98src-wlib-y := string.S crt0.S crtsavres.S stdio.c decompress.c main.c \ 99 $(libfdt) libfdt-wrapper.c \ 100 ns16550.c serial.c simple_alloc.c div64.S util.S \ 101 elf_util.c $(zlib-y) devtree.c stdlib.c \ 102 oflib.c ofconsole.c cuboot.c mpsc.c cpm-serial.c \ 103 uartlite.c mpc52xx-psc.c opal.c 104src-wlib-$(CONFIG_PPC64_BOOT_WRAPPER) += opal-calls.S 105src-wlib-$(CONFIG_40x) += 4xx.c planetcore.c 106src-wlib-$(CONFIG_44x) += 4xx.c ebony.c bamboo.c 107src-wlib-$(CONFIG_8xx) += mpc8xx.c planetcore.c fsl-soc.c 108src-wlib-$(CONFIG_PPC_82xx) += pq2.c fsl-soc.c planetcore.c 109src-wlib-$(CONFIG_EMBEDDED6xx) += mv64x60.c mv64x60_i2c.c ugecon.c fsl-soc.c 110 111src-plat-y := of.c epapr.c 112src-plat-$(CONFIG_40x) += fixed-head.S ep405.c cuboot-hotfoot.c \ 113 treeboot-walnut.c cuboot-acadia.c \ 114 cuboot-kilauea.c simpleboot.c \ 115 virtex405-head.S virtex.c 116src-plat-$(CONFIG_44x) += treeboot-ebony.c cuboot-ebony.c treeboot-bamboo.c \ 117 cuboot-bamboo.c cuboot-sam440ep.c \ 118 cuboot-sequoia.c cuboot-rainier.c \ 119 cuboot-taishan.c cuboot-katmai.c \ 120 cuboot-warp.c cuboot-yosemite.c \ 121 treeboot-iss4xx.c treeboot-currituck.c \ 122 treeboot-akebono.c \ 123 simpleboot.c fixed-head.S virtex.c 124src-plat-$(CONFIG_8xx) += cuboot-8xx.c fixed-head.S ep88xc.c redboot-8xx.c 125src-plat-$(CONFIG_PPC_MPC52xx) += cuboot-52xx.c 126src-plat-$(CONFIG_PPC_82xx) += cuboot-pq2.c fixed-head.S ep8248e.c cuboot-824x.c 127src-plat-$(CONFIG_PPC_83xx) += cuboot-83xx.c fixed-head.S redboot-83xx.c 128src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c 129src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \ 130 cuboot-c2k.c gamecube-head.S \ 131 gamecube.c wii-head.S wii.c holly.c \ 132 fixed-head.S mvme5100.c 133src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c 134src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c 135src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c 136src-plat-$(CONFIG_PPC_PSERIES) += pseries-head.S 137src-plat-$(CONFIG_PPC_POWERNV) += pseries-head.S 138src-plat-$(CONFIG_PPC_IBM_CELL_BLADE) += pseries-head.S 139src-plat-$(CONFIG_MVME7100) += motload-head.S mvme7100.c 140 141src-wlib := $(sort $(src-wlib-y)) 142src-plat := $(sort $(src-plat-y)) 143src-boot := $(src-wlib) $(src-plat) empty.c 144 145src-boot := $(addprefix $(obj)/, $(src-boot)) 146obj-boot := $(addsuffix .o, $(basename $(src-boot))) 147obj-wlib := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-wlib)))) 148obj-plat := $(addsuffix .o, $(basename $(addprefix $(obj)/, $(src-plat)))) 149obj-plat: $(libfdt) 150 151quiet_cmd_copy_kern_src = COPY $@ 152 cmd_copy_kern_src = sed -f $(srctree)/arch/powerpc/boot/fixup-headers.sed $< > $@ 153 154$(addprefix $(obj)/,$(zlib-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 155 $(call cmd,copy_kern_src) 156 157$(addprefix $(obj)/,$(zlibheader-y)): $(obj)/%: $(srctree)/lib/zlib_inflate/% 158 $(call cmd,copy_kern_src) 159 160$(addprefix $(obj)/,$(zliblinuxheader-y)): $(obj)/%: $(srctree)/include/linux/% 161 $(call cmd,copy_kern_src) 162 163$(addprefix $(obj)/,$(zlib-decomp-y)): $(obj)/%: $(srctree)/lib/% 164 $(call cmd,copy_kern_src) 165 166quiet_cmd_copy_libfdt = COPY $@ 167 cmd_copy_libfdt = cp $< $@ 168 169$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/% 170 $(call cmd,copy_libfdt) 171 172$(obj)/empty.c: 173 $(Q)touch $@ 174 175$(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds : $(obj)/%: $(srctree)/$(src)/%.S 176 $(Q)cp $< $@ 177 178clean-files := $(zlib-) $(zlibheader-) $(zliblinuxheader-) \ 179 $(zlib-decomp-) $(libfdt) $(libfdtheader) \ 180 empty.c zImage.coff.lds zImage.ps3.lds zImage.lds 181 182quiet_cmd_bootcc = BOOTCC $@ 183 cmd_bootcc = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTCFLAGS) -c -o $@ $< 184 185quiet_cmd_bootas = BOOTAS $@ 186 cmd_bootas = $(CROSS32CC) -Wp,-MD,$(depfile) $(BOOTAFLAGS) -c -o $@ $< 187 188quiet_cmd_bootar = BOOTAR $@ 189 cmd_bootar = $(CROSS32AR) -cr$(KBUILD_ARFLAGS) $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@ 190 191$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE 192 $(call if_changed_dep,bootcc) 193$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE 194 $(Q)mkdir -p $(dir $@) 195 $(call if_changed_dep,bootcc) 196$(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE 197 $(Q)mkdir -p $(dir $@) 198 $(call if_changed_dep,bootas) 199 200$(obj)/wrapper.a: $(obj-wlib) FORCE 201 $(call if_changed,bootar) 202 203hostprogs-y := addnote hack-coff mktree 204 205targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) 206extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \ 207 $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds 208 209dtstree := $(srctree)/$(src)/dts 210 211wrapper :=$(srctree)/$(src)/wrapper 212wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \ 213 $(wrapper) FORCE 214 215############# 216# Bits for building various flavours of zImage 217 218ifneq ($(CROSS32_COMPILE),) 219CROSSWRAP := -C "$(CROSS32_COMPILE)" 220else 221ifneq ($(CROSS_COMPILE),) 222CROSSWRAP := -C "$(CROSS_COMPILE)" 223endif 224endif 225 226compressor-$(CONFIG_KERNEL_GZIP) := gz 227compressor-$(CONFIG_KERNEL_XZ) := xz 228 229# args (to if_changed): 1 = (this rule), 2 = platform, 3 = dts 4=dtb 5=initrd 230quiet_cmd_wrap = WRAP $@ 231 cmd_wrap =$(CONFIG_SHELL) $(wrapper) -Z $(compressor-y) -c -o $@ -p $2 \ 232 $(CROSSWRAP) $(if $3, -s $3)$(if $4, -d $4)$(if $5, -i $5) \ 233 vmlinux 234 235image-$(CONFIG_PPC_PSERIES) += zImage.pseries 236image-$(CONFIG_PPC_POWERNV) += zImage.pseries 237image-$(CONFIG_PPC_MAPLE) += zImage.maple 238image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries 239image-$(CONFIG_PPC_PS3) += dtbImage.ps3 240image-$(CONFIG_PPC_CHRP) += zImage.chrp 241image-$(CONFIG_PPC_EFIKA) += zImage.chrp 242image-$(CONFIG_PPC_PMAC) += zImage.pmac 243image-$(CONFIG_PPC_HOLLY) += dtbImage.holly 244image-$(CONFIG_DEFAULT_UIMAGE) += uImage 245image-$(CONFIG_EPAPR_BOOT) += zImage.epapr 246 247# 248# Targets which embed a device tree blob 249# 250# Theses are default targets to build images which embed device tree blobs. 251# They are only required on boards which do not have FDT support in firmware. 252# Boards with newish u-boot firmware can use the uImage target above 253# 254 255# Board ports in arch/powerpc/platform/40x/Kconfig 256image-$(CONFIG_EP405) += dtbImage.ep405 257image-$(CONFIG_HOTFOOT) += cuImage.hotfoot 258image-$(CONFIG_WALNUT) += treeImage.walnut 259image-$(CONFIG_ACADIA) += cuImage.acadia 260image-$(CONFIG_OBS600) += uImage.obs600 261 262# Board ports in arch/powerpc/platform/44x/Kconfig 263image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony 264image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo 265image-$(CONFIG_SAM440EP) += cuImage.sam440ep 266image-$(CONFIG_SEQUOIA) += cuImage.sequoia 267image-$(CONFIG_RAINIER) += cuImage.rainier 268image-$(CONFIG_TAISHAN) += cuImage.taishan 269image-$(CONFIG_KATMAI) += cuImage.katmai 270image-$(CONFIG_WARP) += cuImage.warp 271image-$(CONFIG_YOSEMITE) += cuImage.yosemite 272image-$(CONFIG_ISS4xx) += treeImage.iss4xx \ 273 treeImage.iss4xx-mpic 274image-$(CONFIG_CURRITUCK) += treeImage.currituck 275image-$(CONFIG_AKEBONO) += treeImage.akebono 276 277# Board ports in arch/powerpc/platform/8xx/Kconfig 278image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads 279image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads 280image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc 281image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ 282 dtbImage.adder875-redboot 283 284# Board ports in arch/powerpc/platform/52xx/Kconfig 285image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200 lite5200.dtb 286image-$(CONFIG_PPC_LITE5200) += cuImage.lite5200b lite5200b.dtb 287image-$(CONFIG_PPC_MEDIA5200) += cuImage.media5200 media5200.dtb 288 289# Board ports in arch/powerpc/platform/82xx/Kconfig 290image-$(CONFIG_MPC8272_ADS) += cuImage.mpc8272ads 291image-$(CONFIG_PQ2FADS) += cuImage.pq2fads 292image-$(CONFIG_EP8248E) += dtbImage.ep8248e 293 294# Board ports in arch/powerpc/platform/83xx/Kconfig 295image-$(CONFIG_MPC832x_MDS) += cuImage.mpc832x_mds 296image-$(CONFIG_MPC832x_RDB) += cuImage.mpc832x_rdb 297image-$(CONFIG_MPC834x_ITX) += cuImage.mpc8349emitx \ 298 cuImage.mpc8349emitxgp 299image-$(CONFIG_MPC834x_MDS) += cuImage.mpc834x_mds 300image-$(CONFIG_MPC836x_MDS) += cuImage.mpc836x_mds 301image-$(CONFIG_ASP834x) += dtbImage.asp834x-redboot 302 303# Board ports in arch/powerpc/platform/85xx/Kconfig 304image-$(CONFIG_MPC8540_ADS) += cuImage.mpc8540ads 305image-$(CONFIG_MPC8560_ADS) += cuImage.mpc8560ads 306image-$(CONFIG_MPC85xx_CDS) += cuImage.mpc8541cds \ 307 cuImage.mpc8548cds_32b \ 308 cuImage.mpc8555cds 309image-$(CONFIG_MPC85xx_MDS) += cuImage.mpc8568mds 310image-$(CONFIG_MPC85xx_DS) += cuImage.mpc8544ds \ 311 cuImage.mpc8572ds 312image-$(CONFIG_TQM8540) += cuImage.tqm8540 313image-$(CONFIG_TQM8541) += cuImage.tqm8541 314image-$(CONFIG_TQM8548) += cuImage.tqm8548 315image-$(CONFIG_TQM8555) += cuImage.tqm8555 316image-$(CONFIG_TQM8560) += cuImage.tqm8560 317image-$(CONFIG_SBC8548) += cuImage.sbc8548 318image-$(CONFIG_KSI8560) += cuImage.ksi8560 319 320# Board ports in arch/powerpc/platform/86xx/Kconfig 321image-$(CONFIG_MVME7100) += dtbImage.mvme7100 322 323# Board ports in arch/powerpc/platform/embedded6xx/Kconfig 324image-$(CONFIG_STORCENTER) += cuImage.storcenter 325image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2 326image-$(CONFIG_PPC_C2K) += cuImage.c2k 327image-$(CONFIG_GAMECUBE) += dtbImage.gamecube 328image-$(CONFIG_WII) += dtbImage.wii 329image-$(CONFIG_MVME5100) += dtbImage.mvme5100 330 331# Board port in arch/powerpc/platform/amigaone/Kconfig 332image-$(CONFIG_AMIGAONE) += cuImage.amigaone 333 334# For 32-bit powermacs, build the COFF and miboot images 335# as well as the ELF images. 336ifeq ($(CONFIG_PPC32),y) 337image-$(CONFIG_PPC_PMAC) += zImage.coff zImage.miboot 338endif 339 340# Allow extra targets to be added to the defconfig 341image-y += $(subst ",,$(CONFIG_EXTRA_TARGETS)) 342 343initrd- := $(patsubst zImage%, zImage.initrd%, $(image-)) 344initrd-y := $(patsubst zImage%, zImage.initrd%, \ 345 $(patsubst dtbImage%, dtbImage.initrd%, \ 346 $(patsubst simpleImage%, simpleImage.initrd%, \ 347 $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) 348initrd-y := $(filter-out $(image-y), $(initrd-y)) 349targets += $(image-y) $(initrd-y) 350 351$(addprefix $(obj)/, $(initrd-y)): $(obj)/ramdisk.image.gz 352 353# Don't put the ramdisk on the pattern rule; when its missing make will try 354# the pattern rule with less dependencies that also matches (even with the 355# hard dependency listed). 356$(obj)/zImage.initrd.%: vmlinux $(wrapperbits) FORCE 357 $(call if_changed,wrap,$*,,,$(obj)/ramdisk.image.gz) 358 359$(addprefix $(obj)/, $(sort $(filter zImage.%, $(image-y)))): vmlinux $(wrapperbits) FORCE 360 $(call if_changed,wrap,$(subst $(obj)/zImage.,,$@)) 361 362# dtbImage% - a dtbImage is a zImage with an embedded device tree blob 363$(obj)/dtbImage.initrd.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE 364 $(call if_changed,wrap,$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 365 366$(obj)/dtbImage.%: vmlinux $(wrapperbits) $(obj)/%.dtb FORCE 367 $(call if_changed,wrap,$*,,$(obj)/$*.dtb) 368 369# This cannot be in the root of $(src) as the zImage rule always adds a $(obj) 370# prefix 371$(obj)/vmlinux.strip: vmlinux 372 $(STRIP) -s -R .comment $< -o $@ 373 374$(obj)/uImage: vmlinux $(wrapperbits) FORCE 375 $(call if_changed,wrap,uboot) 376 377$(obj)/uImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 378 $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 379 380$(obj)/uImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 381 $(call if_changed,wrap,uboot-$*,,$(obj)/$*.dtb) 382 383$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 384 $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 385 386$(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 387 $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb) 388 389$(obj)/simpleImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 390 $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 391 392$(obj)/simpleImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 393 $(call if_changed,wrap,simpleboot-$*,,$(obj)/$*.dtb) 394 395$(obj)/treeImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 396 $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) 397 398$(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) FORCE 399 $(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb) 400 401# Rule to build device tree blobs 402$(obj)/%.dtb: $(src)/dts/%.dts FORCE 403 $(call if_changed_dep,dtc) 404 405$(obj)/%.dtb: $(src)/dts/fsl/%.dts FORCE 406 $(call if_changed_dep,dtc) 407 408# If there isn't a platform selected then just strip the vmlinux. 409ifeq (,$(image-y)) 410image-y := vmlinux.strip 411endif 412 413$(obj)/zImage: $(addprefix $(obj)/, $(image-y)) 414 $(Q)rm -f $@; ln $< $@ 415$(obj)/zImage.initrd: $(addprefix $(obj)/, $(initrd-y)) 416 $(Q)rm -f $@; ln $< $@ 417 418# Only install the vmlinux 419install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) 420 sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" 421 422# Install the vmlinux and other built boot targets. 423zInstall: $(CONFIGURE) $(addprefix $(obj)/, $(image-y)) 424 sh -x $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" vmlinux System.map "$(INSTALL_PATH)" $^ 425 426# anything not in $(targets) 427clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \ 428 zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \ 429 zImage.miboot zImage.pmac zImage.pseries \ 430 zImage.maple simpleImage.* otheros.bld *.dtb 431 432# clean up files cached by wrapper 433clean-kernel-base := vmlinux.strip vmlinux.bin 434clean-kernel := $(addsuffix .gz,$(clean-kernel-base)) 435clean-kernel += $(addsuffix .xz,$(clean-kernel-base)) 436# If not absolute clean-files are relative to $(obj). 437clean-files += $(addprefix $(objtree)/, $(clean-kernel)) 438 439WRAPPER_OBJDIR := /usr/lib/kernel-wrapper 440WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts 441WRAPPER_BINDIR := /usr/sbin 442INSTALL := install 443 444extra-installed := $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y)) 445hostprogs-installed := $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs-y)) 446wrapper-installed := $(DESTDIR)$(WRAPPER_BINDIR)/wrapper 447dts-installed := $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts)) 448 449all-installed := $(extra-installed) $(hostprogs-installed) $(wrapper-installed) $(dts-installed) 450 451quiet_cmd_mkdir = MKDIR $(patsubst $(INSTALL_HDR_PATH)/%,%,$@) 452 cmd_mkdir = mkdir -p $@ 453 454quiet_cmd_install = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,%,$@) 455 cmd_install = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_OBJDIR)/%,$(obj)/%,$@) $@ 456 457quiet_cmd_install_dts = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,dts/%,$@) 458 cmd_install_dts = $(INSTALL) -m0644 $(patsubst $(DESTDIR)$(WRAPPER_DTSDIR)/%,$(srctree)/$(obj)/dts/%,$@) $@ 459 460quiet_cmd_install_exe = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 461 cmd_install_exe = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(obj)/%,$@) $@ 462 463quiet_cmd_install_wrapper = INSTALL $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,%,$@) 464 cmd_install_wrapper = $(INSTALL) -m0755 $(patsubst $(DESTDIR)$(WRAPPER_BINDIR)/%,$(srctree)/$(obj)/%,$@) $@ ;\ 465 sed -i $@ -e 's%^object=.*%object=$(WRAPPER_OBJDIR)%' \ 466 -e 's%^objbin=.*%objbin=$(WRAPPER_BINDIR)%' \ 467 468 469$(DESTDIR)$(WRAPPER_OBJDIR) $(DESTDIR)$(WRAPPER_DTSDIR) $(DESTDIR)$(WRAPPER_BINDIR): 470 $(call cmd,mkdir) 471 472$(extra-installed) : $(DESTDIR)$(WRAPPER_OBJDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_OBJDIR) 473 $(call cmd,install) 474 475$(hostprogs-installed) : $(DESTDIR)$(WRAPPER_BINDIR)/% : $(obj)/% | $(DESTDIR)$(WRAPPER_BINDIR) 476 $(call cmd,install_exe) 477 478$(dts-installed) : $(DESTDIR)$(WRAPPER_DTSDIR)/% : $(srctree)/$(obj)/dts/% | $(DESTDIR)$(WRAPPER_DTSDIR) 479 $(call cmd,install_dts) 480 481$(wrapper-installed): $(DESTDIR)$(WRAPPER_BINDIR) $(srctree)/$(obj)/wrapper | $(DESTDIR)$(WRAPPER_BINDIR) 482 $(call cmd,install_wrapper) 483 484$(obj)/bootwrapper_install: $(all-installed) 485