1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3 * Copyright 2007 David Gibson, IBM Corporation.
4 *
5 * Based on earlier code:
6 * Matt Porter <mporter@kernel.crashing.org>
7 * Copyright 2002-2005 MontaVista Software Inc.
8 *
9 * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net>
10 * Copyright (c) 2003, 2004 Zultys Technologies
11 *
12 * Copyright (C) 2009 Wind River Systems, Inc.
13 * Updated for supporting PPC405EX on Kilauea.
14 * Tiejun Chen <tiejun.chen@windriver.com>
15 */
16 #include <stddef.h>
17 #include "types.h"
18 #include "string.h"
19 #include "stdio.h"
20 #include "ops.h"
21 #include "reg.h"
22 #include "dcr.h"
23
chip_11_errata(unsigned long memsize)24 static unsigned long chip_11_errata(unsigned long memsize)
25 {
26 unsigned long pvr;
27
28 pvr = mfpvr();
29
30 switch (pvr & 0xf0000ff0) {
31 case 0x40000850:
32 case 0x400008d0:
33 case 0x200008d0:
34 memsize -= 4096;
35 break;
36 default:
37 break;
38 }
39
40 return memsize;
41 }
42
43 /* Read the 4xx SDRAM controller to get size of system memory. */
ibm4xx_sdram_fixup_memsize(void)44 void ibm4xx_sdram_fixup_memsize(void)
45 {
46 int i;
47 unsigned long memsize, bank_config;
48
49 memsize = 0;
50 for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) {
51 bank_config = SDRAM0_READ(sdram_bxcr[i]);
52 if (bank_config & SDRAM_CONFIG_BANK_ENABLE)
53 memsize += SDRAM_CONFIG_BANK_SIZE(bank_config);
54 }
55
56 memsize = chip_11_errata(memsize);
57 dt_fixup_memory(0, memsize);
58 }
59
60 /* Read the 440SPe MQ controller to get size of system memory. */
61 #define DCRN_MQ0_B0BAS 0x40
62 #define DCRN_MQ0_B1BAS 0x41
63 #define DCRN_MQ0_B2BAS 0x42
64 #define DCRN_MQ0_B3BAS 0x43
65
ibm440spe_decode_bas(u32 bas)66 static u64 ibm440spe_decode_bas(u32 bas)
67 {
68 u64 base = ((u64)(bas & 0xFFE00000u)) << 2;
69
70 /* open coded because I'm paranoid about invalid values */
71 switch ((bas >> 4) & 0xFFF) {
72 case 0:
73 return 0;
74 case 0xffc:
75 return base + 0x000800000ull;
76 case 0xff8:
77 return base + 0x001000000ull;
78 case 0xff0:
79 return base + 0x002000000ull;
80 case 0xfe0:
81 return base + 0x004000000ull;
82 case 0xfc0:
83 return base + 0x008000000ull;
84 case 0xf80:
85 return base + 0x010000000ull;
86 case 0xf00:
87 return base + 0x020000000ull;
88 case 0xe00:
89 return base + 0x040000000ull;
90 case 0xc00:
91 return base + 0x080000000ull;
92 case 0x800:
93 return base + 0x100000000ull;
94 }
95 printf("Memory BAS value 0x%08x unsupported !\n", bas);
96 return 0;
97 }
98
ibm440spe_fixup_memsize(void)99 void ibm440spe_fixup_memsize(void)
100 {
101 u64 banktop, memsize = 0;
102
103 /* Ultimately, we should directly construct the memory node
104 * so we are able to handle holes in the memory address space
105 */
106 banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B0BAS));
107 if (banktop > memsize)
108 memsize = banktop;
109 banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B1BAS));
110 if (banktop > memsize)
111 memsize = banktop;
112 banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B2BAS));
113 if (banktop > memsize)
114 memsize = banktop;
115 banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B3BAS));
116 if (banktop > memsize)
117 memsize = banktop;
118
119 dt_fixup_memory(0, memsize);
120 }
121
122
123 /* 4xx DDR1/2 Denali memory controller support */
124 /* DDR0 registers */
125 #define DDR0_02 2
126 #define DDR0_08 8
127 #define DDR0_10 10
128 #define DDR0_14 14
129 #define DDR0_42 42
130 #define DDR0_43 43
131
132 /* DDR0_02 */
133 #define DDR_START 0x1
134 #define DDR_START_SHIFT 0
135 #define DDR_MAX_CS_REG 0x3
136 #define DDR_MAX_CS_REG_SHIFT 24
137 #define DDR_MAX_COL_REG 0xf
138 #define DDR_MAX_COL_REG_SHIFT 16
139 #define DDR_MAX_ROW_REG 0xf
140 #define DDR_MAX_ROW_REG_SHIFT 8
141 /* DDR0_08 */
142 #define DDR_DDR2_MODE 0x1
143 #define DDR_DDR2_MODE_SHIFT 0
144 /* DDR0_10 */
145 #define DDR_CS_MAP 0x3
146 #define DDR_CS_MAP_SHIFT 8
147 /* DDR0_14 */
148 #define DDR_REDUC 0x1
149 #define DDR_REDUC_SHIFT 16
150 /* DDR0_42 */
151 #define DDR_APIN 0x7
152 #define DDR_APIN_SHIFT 24
153 /* DDR0_43 */
154 #define DDR_COL_SZ 0x7
155 #define DDR_COL_SZ_SHIFT 8
156 #define DDR_BANK8 0x1
157 #define DDR_BANK8_SHIFT 0
158
159 #define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask))
160
161 /*
162 * Some U-Boot versions set the number of chipselects to two
163 * for Sequoia/Rainier boards while they only have one chipselect
164 * hardwired. Hardcode the number of chipselects to one
165 * for sequioa/rainer board models or read the actual value
166 * from the memory controller register DDR0_10 otherwise.
167 */
ibm4xx_denali_get_cs(void)168 static inline u32 ibm4xx_denali_get_cs(void)
169 {
170 void *devp;
171 char model[64];
172 u32 val, cs;
173
174 devp = finddevice("/");
175 if (!devp)
176 goto read_cs;
177
178 if (getprop(devp, "model", model, sizeof(model)) <= 0)
179 goto read_cs;
180
181 model[sizeof(model)-1] = 0;
182
183 if (!strcmp(model, "amcc,sequoia") ||
184 !strcmp(model, "amcc,rainier"))
185 return 1;
186
187 read_cs:
188 /* get CS value */
189 val = SDRAM0_READ(DDR0_10);
190
191 val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT);
192 cs = 0;
193 while (val) {
194 if (val & 0x1)
195 cs++;
196 val = val >> 1;
197 }
198 return cs;
199 }
200
ibm4xx_denali_fixup_memsize(void)201 void ibm4xx_denali_fixup_memsize(void)
202 {
203 u32 val, max_cs, max_col, max_row;
204 u32 cs, col, row, bank, dpath;
205 unsigned long memsize;
206
207 val = SDRAM0_READ(DDR0_02);
208 if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT))
209 fatal("DDR controller is not initialized\n");
210
211 /* get maximum cs col and row values */
212 max_cs = DDR_GET_VAL(val, DDR_MAX_CS_REG, DDR_MAX_CS_REG_SHIFT);
213 max_col = DDR_GET_VAL(val, DDR_MAX_COL_REG, DDR_MAX_COL_REG_SHIFT);
214 max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT);
215
216 cs = ibm4xx_denali_get_cs();
217 if (!cs)
218 fatal("No memory installed\n");
219 if (cs > max_cs)
220 fatal("DDR wrong CS configuration\n");
221
222 /* get data path bytes */
223 val = SDRAM0_READ(DDR0_14);
224
225 if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT))
226 dpath = 4; /* 32 bits */
227 else
228 dpath = 8; /* 64 bits */
229
230 /* get address pins (rows) */
231 val = SDRAM0_READ(DDR0_42);
232
233 row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT);
234 if (row > max_row)
235 fatal("DDR wrong APIN configuration\n");
236 row = max_row - row;
237
238 /* get collomn size and banks */
239 val = SDRAM0_READ(DDR0_43);
240
241 col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT);
242 if (col > max_col)
243 fatal("DDR wrong COL configuration\n");
244 col = max_col - col;
245
246 if (DDR_GET_VAL(val, DDR_BANK8, DDR_BANK8_SHIFT))
247 bank = 8; /* 8 banks */
248 else
249 bank = 4; /* 4 banks */
250
251 memsize = cs * (1 << (col+row)) * bank * dpath;
252 memsize = chip_11_errata(memsize);
253 dt_fixup_memory(0, memsize);
254 }
255
256 #define SPRN_DBCR0_40X 0x3F2
257 #define SPRN_DBCR0_44X 0x134
258 #define DBCR0_RST_SYSTEM 0x30000000
259
ibm44x_dbcr_reset(void)260 void ibm44x_dbcr_reset(void)
261 {
262 unsigned long tmp;
263
264 asm volatile (
265 "mfspr %0,%1\n"
266 "oris %0,%0,%2@h\n"
267 "mtspr %1,%0"
268 : "=&r"(tmp) : "i"(SPRN_DBCR0_44X), "i"(DBCR0_RST_SYSTEM)
269 );
270
271 }
272
ibm40x_dbcr_reset(void)273 void ibm40x_dbcr_reset(void)
274 {
275 unsigned long tmp;
276
277 asm volatile (
278 "mfspr %0,%1\n"
279 "oris %0,%0,%2@h\n"
280 "mtspr %1,%0"
281 : "=&r"(tmp) : "i"(SPRN_DBCR0_40X), "i"(DBCR0_RST_SYSTEM)
282 );
283 }
284
285 #define EMAC_RESET 0x20000000
ibm4xx_quiesce_eth(u32 * emac0,u32 * emac1)286 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1)
287 {
288 /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't
289 * do this for us
290 */
291 if (emac0)
292 *emac0 = EMAC_RESET;
293 if (emac1)
294 *emac1 = EMAC_RESET;
295
296 mtdcr(DCRN_MAL0_CFG, MAL_RESET);
297 while (mfdcr(DCRN_MAL0_CFG) & MAL_RESET)
298 ; /* loop until reset takes effect */
299 }
300
301 /* Read 4xx EBC bus bridge registers to get mappings of the peripheral
302 * banks into the OPB address space */
ibm4xx_fixup_ebc_ranges(const char * ebc)303 void ibm4xx_fixup_ebc_ranges(const char *ebc)
304 {
305 void *devp;
306 u32 bxcr;
307 u32 ranges[EBC_NUM_BANKS*4];
308 u32 *p = ranges;
309 int i;
310
311 for (i = 0; i < EBC_NUM_BANKS; i++) {
312 mtdcr(DCRN_EBC0_CFGADDR, EBC_BXCR(i));
313 bxcr = mfdcr(DCRN_EBC0_CFGDATA);
314
315 if ((bxcr & EBC_BXCR_BU) != EBC_BXCR_BU_OFF) {
316 *p++ = i;
317 *p++ = 0;
318 *p++ = bxcr & EBC_BXCR_BAS;
319 *p++ = EBC_BXCR_BANK_SIZE(bxcr);
320 }
321 }
322
323 devp = finddevice(ebc);
324 if (! devp)
325 fatal("Couldn't locate EBC node %s\n\r", ebc);
326
327 setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32));
328 }
329
330 /* Calculate 440GP clocks */
ibm440gp_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk)331 void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
332 {
333 u32 sys0 = mfdcr(DCRN_CPC0_SYS0);
334 u32 cr0 = mfdcr(DCRN_CPC0_CR0);
335 u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
336 u32 opdv = CPC0_SYS0_OPDV(sys0);
337 u32 epdv = CPC0_SYS0_EPDV(sys0);
338
339 if (sys0 & CPC0_SYS0_BYPASS) {
340 /* Bypass system PLL */
341 cpu = plb = sys_clk;
342 } else {
343 if (sys0 & CPC0_SYS0_EXTSL)
344 /* PerClk */
345 m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv;
346 else
347 /* CPU clock */
348 m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0);
349 cpu = sys_clk * m / CPC0_SYS0_FWDVA(sys0);
350 plb = sys_clk * m / CPC0_SYS0_FWDVB(sys0);
351 }
352
353 opb = plb / opdv;
354 ebc = opb / epdv;
355
356 /* FIXME: Check if this is for all 440GP, or just Ebony */
357 if ((mfpvr() & 0xf0000fff) == 0x40000440)
358 /* Rev. B 440GP, use external system clock */
359 tb = sys_clk;
360 else
361 /* Rev. C 440GP, errata force us to use internal clock */
362 tb = cpu;
363
364 if (cr0 & CPC0_CR0_U0EC)
365 /* External UART clock */
366 uart0 = ser_clk;
367 else
368 /* Internal UART clock */
369 uart0 = plb / CPC0_CR0_UDIV(cr0);
370
371 if (cr0 & CPC0_CR0_U1EC)
372 /* External UART clock */
373 uart1 = ser_clk;
374 else
375 /* Internal UART clock */
376 uart1 = plb / CPC0_CR0_UDIV(cr0);
377
378 printf("PPC440GP: SysClk = %dMHz (%x)\n\r",
379 (sys_clk + 500000) / 1000000, sys_clk);
380
381 dt_fixup_cpu_clocks(cpu, tb, 0);
382
383 dt_fixup_clock("/plb", plb);
384 dt_fixup_clock("/plb/opb", opb);
385 dt_fixup_clock("/plb/opb/ebc", ebc);
386 dt_fixup_clock("/plb/opb/serial@40000200", uart0);
387 dt_fixup_clock("/plb/opb/serial@40000300", uart1);
388 }
389
390 #define SPRN_CCR1 0x378
391
__fix_zero(u32 v,u32 def)392 static inline u32 __fix_zero(u32 v, u32 def)
393 {
394 return v ? v : def;
395 }
396
__ibm440eplike_fixup_clocks(unsigned int sys_clk,unsigned int tmr_clk,int per_clk_from_opb)397 static unsigned int __ibm440eplike_fixup_clocks(unsigned int sys_clk,
398 unsigned int tmr_clk,
399 int per_clk_from_opb)
400 {
401 /* PLL config */
402 u32 pllc = CPR0_READ(DCRN_CPR0_PLLC);
403 u32 plld = CPR0_READ(DCRN_CPR0_PLLD);
404
405 /* Dividers */
406 u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32);
407 u32 fwdva = __fix_zero((plld >> 16) & 0xf, 16);
408 u32 fwdvb = __fix_zero((plld >> 8) & 7, 8);
409 u32 lfbdv = __fix_zero(plld & 0x3f, 64);
410 u32 pradv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMAD) >> 24) & 7, 8);
411 u32 prbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMBD) >> 24) & 7, 8);
412 u32 opbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_OPBD) >> 24) & 3, 4);
413 u32 perdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PERD) >> 24) & 3, 4);
414
415 /* Input clocks for primary dividers */
416 u32 clk_a, clk_b;
417
418 /* Resulting clocks */
419 u32 cpu, plb, opb, ebc, vco;
420
421 /* Timebase */
422 u32 ccr1, tb = tmr_clk;
423
424 if (pllc & 0x40000000) {
425 u32 m;
426
427 /* Feedback path */
428 switch ((pllc >> 24) & 7) {
429 case 0:
430 /* PLLOUTx */
431 m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv;
432 break;
433 case 1:
434 /* CPU */
435 m = fwdva * pradv0;
436 break;
437 case 5:
438 /* PERClk */
439 m = fwdvb * prbdv0 * opbdv0 * perdv0;
440 break;
441 default:
442 printf("WARNING ! Invalid PLL feedback source !\n");
443 goto bypass;
444 }
445 m *= fbdv;
446 vco = sys_clk * m;
447 clk_a = vco / fwdva;
448 clk_b = vco / fwdvb;
449 } else {
450 bypass:
451 /* Bypass system PLL */
452 vco = 0;
453 clk_a = clk_b = sys_clk;
454 }
455
456 cpu = clk_a / pradv0;
457 plb = clk_b / prbdv0;
458 opb = plb / opbdv0;
459 ebc = (per_clk_from_opb ? opb : plb) / perdv0;
460
461 /* Figure out timebase. Either CPU or default TmrClk */
462 ccr1 = mfspr(SPRN_CCR1);
463
464 /* If passed a 0 tmr_clk, force CPU clock */
465 if (tb == 0) {
466 ccr1 &= ~0x80u;
467 mtspr(SPRN_CCR1, ccr1);
468 }
469 if ((ccr1 & 0x0080) == 0)
470 tb = cpu;
471
472 dt_fixup_cpu_clocks(cpu, tb, 0);
473 dt_fixup_clock("/plb", plb);
474 dt_fixup_clock("/plb/opb", opb);
475 dt_fixup_clock("/plb/opb/ebc", ebc);
476
477 return plb;
478 }
479
eplike_fixup_uart_clk(int index,const char * path,unsigned int ser_clk,unsigned int plb_clk)480 static void eplike_fixup_uart_clk(int index, const char *path,
481 unsigned int ser_clk,
482 unsigned int plb_clk)
483 {
484 unsigned int sdr;
485 unsigned int clock;
486
487 switch (index) {
488 case 0:
489 sdr = SDR0_READ(DCRN_SDR0_UART0);
490 break;
491 case 1:
492 sdr = SDR0_READ(DCRN_SDR0_UART1);
493 break;
494 case 2:
495 sdr = SDR0_READ(DCRN_SDR0_UART2);
496 break;
497 case 3:
498 sdr = SDR0_READ(DCRN_SDR0_UART3);
499 break;
500 default:
501 return;
502 }
503
504 if (sdr & 0x00800000u)
505 clock = ser_clk;
506 else
507 clock = plb_clk / __fix_zero(sdr & 0xff, 256);
508
509 dt_fixup_clock(path, clock);
510 }
511
ibm440ep_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk,unsigned int tmr_clk)512 void ibm440ep_fixup_clocks(unsigned int sys_clk,
513 unsigned int ser_clk,
514 unsigned int tmr_clk)
515 {
516 unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0);
517
518 /* serial clocks need fixup based on int/ext */
519 eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk);
520 eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk);
521 eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk);
522 eplike_fixup_uart_clk(3, "/plb/opb/serial@ef600600", ser_clk, plb_clk);
523 }
524
ibm440gx_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk,unsigned int tmr_clk)525 void ibm440gx_fixup_clocks(unsigned int sys_clk,
526 unsigned int ser_clk,
527 unsigned int tmr_clk)
528 {
529 unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
530
531 /* serial clocks need fixup based on int/ext */
532 eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk);
533 eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk);
534 }
535
ibm440spe_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk,unsigned int tmr_clk)536 void ibm440spe_fixup_clocks(unsigned int sys_clk,
537 unsigned int ser_clk,
538 unsigned int tmr_clk)
539 {
540 unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1);
541
542 /* serial clocks need fixup based on int/ext */
543 eplike_fixup_uart_clk(0, "/plb/opb/serial@f0000200", ser_clk, plb_clk);
544 eplike_fixup_uart_clk(1, "/plb/opb/serial@f0000300", ser_clk, plb_clk);
545 eplike_fixup_uart_clk(2, "/plb/opb/serial@f0000600", ser_clk, plb_clk);
546 }
547
ibm405gp_fixup_clocks(unsigned int sys_clk,unsigned int ser_clk)548 void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk)
549 {
550 u32 pllmr = mfdcr(DCRN_CPC0_PLLMR);
551 u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0);
552 u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1);
553 u32 psr = mfdcr(DCRN_405_CPC0_PSR);
554 u32 cpu, plb, opb, ebc, tb, uart0, uart1, m;
555 u32 fwdv, fwdvb, fbdv, cbdv, opdv, epdv, ppdv, udiv;
556
557 fwdv = (8 - ((pllmr & 0xe0000000) >> 29));
558 fbdv = (pllmr & 0x1e000000) >> 25;
559 if (fbdv == 0)
560 fbdv = 16;
561 cbdv = ((pllmr & 0x00060000) >> 17) + 1; /* CPU:PLB */
562 opdv = ((pllmr & 0x00018000) >> 15) + 1; /* PLB:OPB */
563 ppdv = ((pllmr & 0x00006000) >> 13) + 1; /* PLB:PCI */
564 epdv = ((pllmr & 0x00001800) >> 11) + 2; /* PLB:EBC */
565 udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1;
566
567 /* check for 405GPr */
568 if ((mfpvr() & 0xfffffff0) == (0x50910951 & 0xfffffff0)) {
569 fwdvb = 8 - (pllmr & 0x00000007);
570 if (!(psr & 0x00001000)) /* PCI async mode enable == 0 */
571 if (psr & 0x00000020) /* New mode enable */
572 m = fwdvb * 2 * ppdv;
573 else
574 m = fwdvb * cbdv * ppdv;
575 else if (psr & 0x00000020) /* New mode enable */
576 if (psr & 0x00000800) /* PerClk synch mode */
577 m = fwdvb * 2 * epdv;
578 else
579 m = fbdv * fwdv;
580 else if (epdv == fbdv)
581 m = fbdv * cbdv * epdv;
582 else
583 m = fbdv * fwdvb * cbdv;
584
585 cpu = sys_clk * m / fwdv;
586 plb = sys_clk * m / (fwdvb * cbdv);
587 } else {
588 m = fwdv * fbdv * cbdv;
589 cpu = sys_clk * m / fwdv;
590 plb = cpu / cbdv;
591 }
592 opb = plb / opdv;
593 ebc = plb / epdv;
594
595 if (cpc0_cr0 & 0x80)
596 /* uart0 uses the external clock */
597 uart0 = ser_clk;
598 else
599 uart0 = cpu / udiv;
600
601 if (cpc0_cr0 & 0x40)
602 /* uart1 uses the external clock */
603 uart1 = ser_clk;
604 else
605 uart1 = cpu / udiv;
606
607 /* setup the timebase clock to tick at the cpu frequency */
608 cpc0_cr1 = cpc0_cr1 & ~0x00800000;
609 mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1);
610 tb = cpu;
611
612 dt_fixup_cpu_clocks(cpu, tb, 0);
613 dt_fixup_clock("/plb", plb);
614 dt_fixup_clock("/plb/opb", opb);
615 dt_fixup_clock("/plb/ebc", ebc);
616 dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
617 dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
618 }
619
620
ibm405ep_fixup_clocks(unsigned int sys_clk)621 void ibm405ep_fixup_clocks(unsigned int sys_clk)
622 {
623 u32 pllmr0 = mfdcr(DCRN_CPC0_PLLMR0);
624 u32 pllmr1 = mfdcr(DCRN_CPC0_PLLMR1);
625 u32 cpc0_ucr = mfdcr(DCRN_CPC0_UCR);
626 u32 cpu, plb, opb, ebc, uart0, uart1;
627 u32 fwdva, fwdvb, fbdv, cbdv, opdv, epdv;
628 u32 pllmr0_ccdv, tb, m;
629
630 fwdva = 8 - ((pllmr1 & 0x00070000) >> 16);
631 fwdvb = 8 - ((pllmr1 & 0x00007000) >> 12);
632 fbdv = (pllmr1 & 0x00f00000) >> 20;
633 if (fbdv == 0)
634 fbdv = 16;
635
636 cbdv = ((pllmr0 & 0x00030000) >> 16) + 1; /* CPU:PLB */
637 epdv = ((pllmr0 & 0x00000300) >> 8) + 2; /* PLB:EBC */
638 opdv = ((pllmr0 & 0x00003000) >> 12) + 1; /* PLB:OPB */
639
640 m = fbdv * fwdvb;
641
642 pllmr0_ccdv = ((pllmr0 & 0x00300000) >> 20) + 1;
643 if (pllmr1 & 0x80000000)
644 cpu = sys_clk * m / (fwdva * pllmr0_ccdv);
645 else
646 cpu = sys_clk / pllmr0_ccdv;
647
648 plb = cpu / cbdv;
649 opb = plb / opdv;
650 ebc = plb / epdv;
651 tb = cpu;
652 uart0 = cpu / (cpc0_ucr & 0x0000007f);
653 uart1 = cpu / ((cpc0_ucr & 0x00007f00) >> 8);
654
655 dt_fixup_cpu_clocks(cpu, tb, 0);
656 dt_fixup_clock("/plb", plb);
657 dt_fixup_clock("/plb/opb", opb);
658 dt_fixup_clock("/plb/ebc", ebc);
659 dt_fixup_clock("/plb/opb/serial@ef600300", uart0);
660 dt_fixup_clock("/plb/opb/serial@ef600400", uart1);
661 }
662
663 static u8 ibm405ex_fwdv_multi_bits[] = {
664 /* values for: 1 - 16 */
665 0x01, 0x02, 0x0e, 0x09, 0x04, 0x0b, 0x10, 0x0d, 0x0c, 0x05,
666 0x06, 0x0f, 0x0a, 0x07, 0x08, 0x03
667 };
668
ibm405ex_get_fwdva(unsigned long cpr_fwdv)669 u32 ibm405ex_get_fwdva(unsigned long cpr_fwdv)
670 {
671 u32 index;
672
673 for (index = 0; index < ARRAY_SIZE(ibm405ex_fwdv_multi_bits); index++)
674 if (cpr_fwdv == (u32)ibm405ex_fwdv_multi_bits[index])
675 return index + 1;
676
677 return 0;
678 }
679
680 static u8 ibm405ex_fbdv_multi_bits[] = {
681 /* values for: 1 - 100 */
682 0x00, 0xff, 0x7e, 0xfd, 0x7a, 0xf5, 0x6a, 0xd5, 0x2a, 0xd4,
683 0x29, 0xd3, 0x26, 0xcc, 0x19, 0xb3, 0x67, 0xce, 0x1d, 0xbb,
684 0x77, 0xee, 0x5d, 0xba, 0x74, 0xe9, 0x52, 0xa5, 0x4b, 0x96,
685 0x2c, 0xd8, 0x31, 0xe3, 0x46, 0x8d, 0x1b, 0xb7, 0x6f, 0xde,
686 0x3d, 0xfb, 0x76, 0xed, 0x5a, 0xb5, 0x6b, 0xd6, 0x2d, 0xdb,
687 0x36, 0xec, 0x59, 0xb2, 0x64, 0xc9, 0x12, 0xa4, 0x48, 0x91,
688 0x23, 0xc7, 0x0e, 0x9c, 0x38, 0xf0, 0x61, 0xc2, 0x05, 0x8b,
689 0x17, 0xaf, 0x5f, 0xbe, 0x7c, 0xf9, 0x72, 0xe5, 0x4a, 0x95,
690 0x2b, 0xd7, 0x2e, 0xdc, 0x39, 0xf3, 0x66, 0xcd, 0x1a, 0xb4,
691 0x68, 0xd1, 0x22, 0xc4, 0x09, 0x93, 0x27, 0xcf, 0x1e, 0xbc,
692 /* values for: 101 - 200 */
693 0x78, 0xf1, 0x62, 0xc5, 0x0a, 0x94, 0x28, 0xd0, 0x21, 0xc3,
694 0x06, 0x8c, 0x18, 0xb0, 0x60, 0xc1, 0x02, 0x84, 0x08, 0x90,
695 0x20, 0xc0, 0x01, 0x83, 0x07, 0x8f, 0x1f, 0xbf, 0x7f, 0xfe,
696 0x7d, 0xfa, 0x75, 0xea, 0x55, 0xaa, 0x54, 0xa9, 0x53, 0xa6,
697 0x4c, 0x99, 0x33, 0xe7, 0x4e, 0x9d, 0x3b, 0xf7, 0x6e, 0xdd,
698 0x3a, 0xf4, 0x69, 0xd2, 0x25, 0xcb, 0x16, 0xac, 0x58, 0xb1,
699 0x63, 0xc6, 0x0d, 0x9b, 0x37, 0xef, 0x5e, 0xbd, 0x7b, 0xf6,
700 0x6d, 0xda, 0x35, 0xeb, 0x56, 0xad, 0x5b, 0xb6, 0x6c, 0xd9,
701 0x32, 0xe4, 0x49, 0x92, 0x24, 0xc8, 0x11, 0xa3, 0x47, 0x8e,
702 0x1c, 0xb8, 0x70, 0xe1, 0x42, 0x85, 0x0b, 0x97, 0x2f, 0xdf,
703 /* values for: 201 - 255 */
704 0x3e, 0xfc, 0x79, 0xf2, 0x65, 0xca, 0x15, 0xab, 0x57, 0xae,
705 0x5c, 0xb9, 0x73, 0xe6, 0x4d, 0x9a, 0x34, 0xe8, 0x51, 0xa2,
706 0x44, 0x89, 0x13, 0xa7, 0x4f, 0x9e, 0x3c, 0xf8, 0x71, 0xe2,
707 0x45, 0x8a, 0x14, 0xa8, 0x50, 0xa1, 0x43, 0x86, 0x0c, 0x98,
708 0x30, 0xe0, 0x41, 0x82, 0x04, 0x88, 0x10, 0xa0, 0x40, 0x81,
709 0x03, 0x87, 0x0f, 0x9f, 0x3f /* END */
710 };
711
ibm405ex_get_fbdv(unsigned long cpr_fbdv)712 u32 ibm405ex_get_fbdv(unsigned long cpr_fbdv)
713 {
714 u32 index;
715
716 for (index = 0; index < ARRAY_SIZE(ibm405ex_fbdv_multi_bits); index++)
717 if (cpr_fbdv == (u32)ibm405ex_fbdv_multi_bits[index])
718 return index + 1;
719
720 return 0;
721 }
722
ibm405ex_fixup_clocks(unsigned int sys_clk,unsigned int uart_clk)723 void ibm405ex_fixup_clocks(unsigned int sys_clk, unsigned int uart_clk)
724 {
725 /* PLL config */
726 u32 pllc = CPR0_READ(DCRN_CPR0_PLLC);
727 u32 plld = CPR0_READ(DCRN_CPR0_PLLD);
728 u32 cpud = CPR0_READ(DCRN_CPR0_PRIMAD);
729 u32 plbd = CPR0_READ(DCRN_CPR0_PRIMBD);
730 u32 opbd = CPR0_READ(DCRN_CPR0_OPBD);
731 u32 perd = CPR0_READ(DCRN_CPR0_PERD);
732
733 /* Dividers */
734 u32 fbdv = ibm405ex_get_fbdv(__fix_zero((plld >> 24) & 0xff, 1));
735
736 u32 fwdva = ibm405ex_get_fwdva(__fix_zero((plld >> 16) & 0x0f, 1));
737
738 u32 cpudv0 = __fix_zero((cpud >> 24) & 7, 8);
739
740 /* PLBDV0 is hardwared to 010. */
741 u32 plbdv0 = 2;
742 u32 plb2xdv0 = __fix_zero((plbd >> 16) & 7, 8);
743
744 u32 opbdv0 = __fix_zero((opbd >> 24) & 3, 4);
745
746 u32 perdv0 = __fix_zero((perd >> 24) & 3, 4);
747
748 /* Resulting clocks */
749 u32 cpu, plb, opb, ebc, vco, tb, uart0, uart1;
750
751 /* PLL's VCO is the source for primary forward ? */
752 if (pllc & 0x40000000) {
753 u32 m;
754
755 /* Feedback path */
756 switch ((pllc >> 24) & 7) {
757 case 0:
758 /* PLLOUTx */
759 m = fbdv;
760 break;
761 case 1:
762 /* CPU */
763 m = fbdv * fwdva * cpudv0;
764 break;
765 case 5:
766 /* PERClk */
767 m = fbdv * fwdva * plb2xdv0 * plbdv0 * opbdv0 * perdv0;
768 break;
769 default:
770 printf("WARNING ! Invalid PLL feedback source !\n");
771 goto bypass;
772 }
773
774 vco = (unsigned int)(sys_clk * m);
775 } else {
776 bypass:
777 /* Bypass system PLL */
778 vco = 0;
779 }
780
781 /* CPU = VCO / ( FWDVA x CPUDV0) */
782 cpu = vco / (fwdva * cpudv0);
783 /* PLB = VCO / ( FWDVA x PLB2XDV0 x PLBDV0) */
784 plb = vco / (fwdva * plb2xdv0 * plbdv0);
785 /* OPB = PLB / OPBDV0 */
786 opb = plb / opbdv0;
787 /* EBC = OPB / PERDV0 */
788 ebc = opb / perdv0;
789
790 tb = cpu;
791 uart0 = uart1 = uart_clk;
792
793 dt_fixup_cpu_clocks(cpu, tb, 0);
794 dt_fixup_clock("/plb", plb);
795 dt_fixup_clock("/plb/opb", opb);
796 dt_fixup_clock("/plb/opb/ebc", ebc);
797 dt_fixup_clock("/plb/opb/serial@ef600200", uart0);
798 dt_fixup_clock("/plb/opb/serial@ef600300", uart1);
799 }
800