xref: /openbmc/linux/arch/parisc/include/asm/uaccess.h (revision ef2b56df)
1 #ifndef __PARISC_UACCESS_H
2 #define __PARISC_UACCESS_H
3 
4 /*
5  * User space memory access functions
6  */
7 #include <asm/page.h>
8 #include <asm/cache.h>
9 
10 #include <linux/bug.h>
11 #include <linux/string.h>
12 
13 #define KERNEL_DS	((mm_segment_t){0})
14 #define USER_DS 	((mm_segment_t){1})
15 
16 #define segment_eq(a, b) ((a).seg == (b).seg)
17 
18 #define get_ds()	(KERNEL_DS)
19 #define get_fs()	(current_thread_info()->addr_limit)
20 #define set_fs(x)	(current_thread_info()->addr_limit = (x))
21 
22 /*
23  * Note that since kernel addresses are in a separate address space on
24  * parisc, we don't need to do anything for access_ok().
25  * We just let the page fault handler do the right thing. This also means
26  * that put_user is the same as __put_user, etc.
27  */
28 
29 #define access_ok(type, uaddr, size)	\
30 	( (uaddr) == (uaddr) )
31 
32 #define put_user __put_user
33 #define get_user __get_user
34 
35 #if !defined(CONFIG_64BIT)
36 #define LDD_USER(val, ptr)	__get_user_asm64(val, ptr)
37 #define STD_USER(x, ptr)	__put_user_asm64(x, ptr)
38 #else
39 #define LDD_USER(val, ptr)	__get_user_asm(val, "ldd", ptr)
40 #define STD_USER(x, ptr)	__put_user_asm("std", x, ptr)
41 #endif
42 
43 /*
44  * The exception table contains two values: the first is the relative offset to
45  * the address of the instruction that is allowed to fault, and the second is
46  * the relative offset to the address of the fixup routine. Since relative
47  * addresses are used, 32bit values are sufficient even on 64bit kernel.
48  */
49 
50 #define ARCH_HAS_RELATIVE_EXTABLE
51 struct exception_table_entry {
52 	int insn;	/* relative address of insn that is allowed to fault. */
53 	int fixup;	/* relative address of fixup routine */
54 };
55 
56 #define ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr )\
57 	".section __ex_table,\"aw\"\n"			   \
58 	".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
59 	".previous\n"
60 
61 /*
62  * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
63  * (with lowest bit set) for which the fault handler in fixup_exception() will
64  * load -EFAULT into %r8 for a read or write fault, and zeroes the target
65  * register in case of a read fault in get_user().
66  */
67 #define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
68 	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
69 
70 /*
71  * load_sr2() preloads the space register %%sr2 - based on the value of
72  * get_fs() - with either a value of 0 to access kernel space (KERNEL_DS which
73  * is 0), or with the current value of %%sr3 to access user space (USER_DS)
74  * memory. The following __get_user_asm() and __put_user_asm() functions have
75  * %%sr2 hard-coded to access the requested memory.
76  */
77 #define load_sr2() \
78 	__asm__(" or,=  %0,%%r0,%%r0\n\t"	\
79 		" mfsp %%sr3,%0\n\t"		\
80 		" mtsp %0,%%sr2\n\t"		\
81 		: : "r"(get_fs()) : )
82 
83 #define __get_user_internal(val, ptr)			\
84 ({							\
85 	register long __gu_err __asm__ ("r8") = 0;	\
86 							\
87 	switch (sizeof(*(ptr))) {			\
88 	case 1: __get_user_asm(val, "ldb", ptr); break;	\
89 	case 2: __get_user_asm(val, "ldh", ptr); break; \
90 	case 4: __get_user_asm(val, "ldw", ptr); break; \
91 	case 8: LDD_USER(val, ptr); break;		\
92 	default: BUILD_BUG();				\
93 	}						\
94 							\
95 	__gu_err;					\
96 })
97 
98 #define __get_user(val, ptr)				\
99 ({							\
100 	load_sr2();					\
101 	__get_user_internal(val, ptr);			\
102 })
103 
104 #define __get_user_asm(val, ldx, ptr)			\
105 {							\
106 	register long __gu_val;				\
107 							\
108 	__asm__("1: " ldx " 0(%%sr2,%2),%0\n"		\
109 		"9:\n"					\
110 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
111 		: "=r"(__gu_val), "=r"(__gu_err)        \
112 		: "r"(ptr), "1"(__gu_err));		\
113 							\
114 	(val) = (__force __typeof__(*(ptr))) __gu_val;	\
115 }
116 
117 #if !defined(CONFIG_64BIT)
118 
119 #define __get_user_asm64(val, ptr)			\
120 {							\
121 	union {						\
122 		unsigned long long	l;		\
123 		__typeof__(*(ptr))	t;		\
124 	} __gu_tmp;					\
125 							\
126 	__asm__("   copy %%r0,%R0\n"			\
127 		"1: ldw 0(%%sr2,%2),%0\n"		\
128 		"2: ldw 4(%%sr2,%2),%R0\n"		\
129 		"9:\n"					\
130 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
131 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	\
132 		: "=&r"(__gu_tmp.l), "=r"(__gu_err)	\
133 		: "r"(ptr), "1"(__gu_err));		\
134 							\
135 	(val) = __gu_tmp.t;				\
136 }
137 
138 #endif /* !defined(CONFIG_64BIT) */
139 
140 
141 #define __put_user_internal(x, ptr)				\
142 ({								\
143 	register long __pu_err __asm__ ("r8") = 0;      	\
144         __typeof__(*(ptr)) __x = (__typeof__(*(ptr)))(x);	\
145 								\
146 	switch (sizeof(*(ptr))) {				\
147 	case 1: __put_user_asm("stb", __x, ptr); break;		\
148 	case 2: __put_user_asm("sth", __x, ptr); break;		\
149 	case 4: __put_user_asm("stw", __x, ptr); break;		\
150 	case 8: STD_USER(__x, ptr); break;			\
151 	default: BUILD_BUG();					\
152 	}							\
153 								\
154 	__pu_err;						\
155 })
156 
157 #define __put_user(x, ptr)					\
158 ({								\
159 	load_sr2();						\
160 	__put_user_internal(x, ptr);				\
161 })
162 
163 
164 /*
165  * The "__put_user/kernel_asm()" macros tell gcc they read from memory
166  * instead of writing. This is because they do not write to any memory
167  * gcc knows about, so there are no aliasing issues. These macros must
168  * also be aware that fixups are executed in the context of the fault,
169  * and any registers used there must be listed as clobbers.
170  * r8 is already listed as err.
171  */
172 
173 #define __put_user_asm(stx, x, ptr)                         \
174 	__asm__ __volatile__ (                              \
175 		"1: " stx " %2,0(%%sr2,%1)\n"		    \
176 		"9:\n"					    \
177 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	    \
178 		: "=r"(__pu_err)                            \
179 		: "r"(ptr), "r"(x), "0"(__pu_err))
180 
181 
182 #if !defined(CONFIG_64BIT)
183 
184 #define __put_user_asm64(__val, ptr) do {	    	    \
185 	__asm__ __volatile__ (				    \
186 		"1: stw %2,0(%%sr2,%1)\n"		    \
187 		"2: stw %R2,4(%%sr2,%1)\n"		    \
188 		"9:\n"					    \
189 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	    \
190 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	    \
191 		: "=r"(__pu_err)                            \
192 		: "r"(ptr), "r"(__val), "0"(__pu_err));	    \
193 } while (0)
194 
195 #endif /* !defined(CONFIG_64BIT) */
196 
197 
198 /*
199  * Complex access routines -- external declarations
200  */
201 
202 extern long strncpy_from_user(char *, const char __user *, long);
203 extern unsigned lclear_user(void __user *, unsigned long);
204 extern long lstrnlen_user(const char __user *, long);
205 /*
206  * Complex access routines -- macros
207  */
208 #define user_addr_max() (~0UL)
209 
210 #define strnlen_user lstrnlen_user
211 #define clear_user lclear_user
212 #define __clear_user lclear_user
213 
214 unsigned long __must_check raw_copy_to_user(void __user *dst, const void *src,
215 					    unsigned long len);
216 unsigned long __must_check raw_copy_from_user(void *dst, const void __user *src,
217 					    unsigned long len);
218 unsigned long __must_check raw_copy_in_user(void __user *dst, const void __user *src,
219 					    unsigned long len);
220 #define INLINE_COPY_TO_USER
221 #define INLINE_COPY_FROM_USER
222 
223 struct pt_regs;
224 int fixup_exception(struct pt_regs *regs);
225 
226 #endif /* __PARISC_UACCESS_H */
227