1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _ASM_PARISC_ROPES_H_ 3 #define _ASM_PARISC_ROPES_H_ 4 5 #include <asm/parisc-device.h> 6 7 #ifdef CONFIG_64BIT 8 /* "low end" PA8800 machines use ZX1 chipset: PAT PDC and only run 64-bit */ 9 #define ZX1_SUPPORT 10 #endif 11 12 #ifdef CONFIG_PROC_FS 13 /* depends on proc fs support. But costs CPU performance */ 14 #undef SBA_COLLECT_STATS 15 #endif 16 17 /* 18 ** The number of pdir entries to "free" before issuing 19 ** a read to PCOM register to flush out PCOM writes. 20 ** Interacts with allocation granularity (ie 4 or 8 entries 21 ** allocated and free'd/purged at a time might make this 22 ** less interesting). 23 */ 24 #define DELAYED_RESOURCE_CNT 16 25 26 #define MAX_IOC 2 /* per Ike. Pluto/Astro only have 1. */ 27 #define ROPES_PER_IOC 8 /* per Ike half or Pluto/Astro */ 28 29 struct ioc { 30 void __iomem *ioc_hpa; /* I/O MMU base address */ 31 char *res_map; /* resource map, bit == pdir entry */ 32 __le64 *pdir_base; /* physical base address */ 33 unsigned long ibase; /* pdir IOV Space base - shared w/lba_pci */ 34 unsigned long imask; /* pdir IOV Space mask - shared w/lba_pci */ 35 #ifdef ZX1_SUPPORT 36 unsigned long iovp_mask; /* help convert IOVA to IOVP */ 37 #endif 38 unsigned long *res_hint; /* next avail IOVP - circular search */ 39 spinlock_t res_lock; 40 unsigned int res_bitshift; /* from the LEFT! */ 41 unsigned int res_size; /* size of resource map in bytes */ 42 #ifdef SBA_HINT_SUPPORT 43 /* FIXME : DMA HINTs not used */ 44 unsigned long hint_mask_pdir; /* bits used for DMA hints */ 45 unsigned int hint_shift_pdir; 46 #endif 47 #if DELAYED_RESOURCE_CNT > 0 48 int saved_cnt; 49 struct sba_dma_pair { 50 dma_addr_t iova; 51 size_t size; 52 } saved[DELAYED_RESOURCE_CNT]; 53 #endif 54 55 #ifdef SBA_COLLECT_STATS 56 #define SBA_SEARCH_SAMPLE 0x100 57 unsigned long avg_search[SBA_SEARCH_SAMPLE]; 58 unsigned long avg_idx; /* current index into avg_search */ 59 unsigned long used_pages; 60 unsigned long msingle_calls; 61 unsigned long msingle_pages; 62 unsigned long msg_calls; 63 unsigned long msg_pages; 64 unsigned long usingle_calls; 65 unsigned long usingle_pages; 66 unsigned long usg_calls; 67 unsigned long usg_pages; 68 #endif 69 /* STUFF We don't need in performance path */ 70 unsigned int pdir_size; /* in bytes, determined by IOV Space size */ 71 }; 72 73 struct sba_device { 74 struct sba_device *next; /* list of SBA's in system */ 75 struct parisc_device *dev; /* dev found in bus walk */ 76 const char *name; 77 void __iomem *sba_hpa; /* base address */ 78 spinlock_t sba_lock; 79 unsigned int flags; /* state/functionality enabled */ 80 unsigned int hw_rev; /* HW revision of chip */ 81 82 struct resource chip_resv; /* MMIO reserved for chip */ 83 struct resource iommu_resv; /* MMIO reserved for iommu */ 84 85 unsigned int num_ioc; /* number of on-board IOC's */ 86 struct ioc ioc[MAX_IOC]; 87 }; 88 89 /* list of SBA's in system, see drivers/parisc/sba_iommu.c */ 90 extern struct sba_device *sba_list; 91 92 #define ASTRO_RUNWAY_PORT 0x582 93 #define IKE_MERCED_PORT 0x803 94 #define REO_MERCED_PORT 0x804 95 #define REOG_MERCED_PORT 0x805 96 #define PLUTO_MCKINLEY_PORT 0x880 97 98 static inline int IS_ASTRO(struct parisc_device *d) { 99 return d->id.hversion == ASTRO_RUNWAY_PORT; 100 } 101 102 static inline int IS_IKE(struct parisc_device *d) { 103 return d->id.hversion == IKE_MERCED_PORT; 104 } 105 106 static inline int IS_PLUTO(struct parisc_device *d) { 107 return d->id.hversion == PLUTO_MCKINLEY_PORT; 108 } 109 110 #define PLUTO_IOVA_BASE (1UL*1024*1024*1024) /* 1GB */ 111 #define PLUTO_IOVA_SIZE (1UL*1024*1024*1024) /* 1GB */ 112 #define PLUTO_GART_SIZE (PLUTO_IOVA_SIZE / 2) 113 114 #define SBA_PDIR_VALID_BIT 0x8000000000000000ULL 115 116 #define SBA_AGPGART_COOKIE (__force __le64) 0x0000badbadc0ffeeULL 117 118 #define SBA_FUNC_ID 0x0000 /* function id */ 119 #define SBA_FCLASS 0x0008 /* function class, bist, header, rev... */ 120 121 #define SBA_FUNC_SIZE 4096 /* SBA configuration function reg set */ 122 123 #define ASTRO_IOC_OFFSET (32 * SBA_FUNC_SIZE) 124 #define PLUTO_IOC_OFFSET (1 * SBA_FUNC_SIZE) 125 /* Ike's IOC's occupy functions 2 and 3 */ 126 #define IKE_IOC_OFFSET(p) ((p+2) * SBA_FUNC_SIZE) 127 128 #define IOC_CTRL 0x8 /* IOC_CTRL offset */ 129 #define IOC_CTRL_TC (1 << 0) /* TOC Enable */ 130 #define IOC_CTRL_CE (1 << 1) /* Coalesce Enable */ 131 #define IOC_CTRL_DE (1 << 2) /* Dillon Enable */ 132 #define IOC_CTRL_RM (1 << 8) /* Real Mode */ 133 #define IOC_CTRL_NC (1 << 9) /* Non Coherent Mode */ 134 #define IOC_CTRL_D4 (1 << 11) /* Disable 4-byte coalescing */ 135 #define IOC_CTRL_DD (1 << 13) /* Disable distr. LMMIO range coalescing */ 136 137 /* 138 ** Offsets into MBIB (Function 0 on Ike and hopefully Astro) 139 ** Firmware programs this stuff. Don't touch it. 140 */ 141 #define LMMIO_DIRECT0_BASE 0x300 142 #define LMMIO_DIRECT0_MASK 0x308 143 #define LMMIO_DIRECT0_ROUTE 0x310 144 145 #define LMMIO_DIST_BASE 0x360 146 #define LMMIO_DIST_MASK 0x368 147 #define LMMIO_DIST_ROUTE 0x370 148 149 #define IOS_DIST_BASE 0x390 150 #define IOS_DIST_MASK 0x398 151 #define IOS_DIST_ROUTE 0x3A0 152 153 #define IOS_DIRECT_BASE 0x3C0 154 #define IOS_DIRECT_MASK 0x3C8 155 #define IOS_DIRECT_ROUTE 0x3D0 156 157 /* 158 ** Offsets into I/O TLB (Function 2 and 3 on Ike) 159 */ 160 #define ROPE0_CTL 0x200 /* "regbus pci0" */ 161 #define ROPE1_CTL 0x208 162 #define ROPE2_CTL 0x210 163 #define ROPE3_CTL 0x218 164 #define ROPE4_CTL 0x220 165 #define ROPE5_CTL 0x228 166 #define ROPE6_CTL 0x230 167 #define ROPE7_CTL 0x238 168 169 #define IOC_ROPE0_CFG 0x500 /* pluto only */ 170 #define IOC_ROPE_AO 0x10 /* Allow "Relaxed Ordering" */ 171 172 #define HF_ENABLE 0x40 173 174 #define IOC_IBASE 0x300 /* IO TLB */ 175 #define IOC_IMASK 0x308 176 #define IOC_PCOM 0x310 177 #define IOC_TCNFG 0x318 178 #define IOC_PDIR_BASE 0x320 179 180 /* 181 ** IOC supports 4/8/16/64KB page sizes (see TCNFG register) 182 ** It's safer (avoid memory corruption) to keep DMA page mappings 183 ** equivalently sized to VM PAGE_SIZE. 184 ** 185 ** We really can't avoid generating a new mapping for each 186 ** page since the Virtual Coherence Index has to be generated 187 ** and updated for each page. 188 ** 189 ** PAGE_SIZE could be greater than IOVP_SIZE. But not the inverse. 190 */ 191 #define IOVP_SIZE PAGE_SIZE 192 #define IOVP_SHIFT PAGE_SHIFT 193 #define IOVP_MASK PAGE_MASK 194 195 #define SBA_PERF_CFG 0x708 /* Performance Counter stuff */ 196 #define SBA_PERF_MASK1 0x718 197 #define SBA_PERF_MASK2 0x730 198 199 /* 200 ** Offsets into PCI Performance Counters (functions 12 and 13) 201 ** Controlled by PERF registers in function 2 & 3 respectively. 202 */ 203 #define SBA_PERF_CNT1 0x200 204 #define SBA_PERF_CNT2 0x208 205 #define SBA_PERF_CNT3 0x210 206 207 /* 208 ** lba_device: Per instance Elroy data structure 209 */ 210 struct lba_device { 211 struct pci_hba_data hba; 212 213 spinlock_t lba_lock; 214 void *iosapic_obj; 215 216 #ifdef CONFIG_64BIT 217 void __iomem *iop_base; /* PA_VIEW - for IO port accessor funcs */ 218 #endif 219 220 int flags; /* state/functionality enabled */ 221 int hw_rev; /* HW revision of chip */ 222 }; 223 224 #define ELROY_HVERS 0x782 225 #define MERCURY_HVERS 0x783 226 #define QUICKSILVER_HVERS 0x784 227 228 static inline int IS_ELROY(struct parisc_device *d) { 229 return (d->id.hversion == ELROY_HVERS); 230 } 231 232 static inline int IS_MERCURY(struct parisc_device *d) { 233 return (d->id.hversion == MERCURY_HVERS); 234 } 235 236 static inline int IS_QUICKSILVER(struct parisc_device *d) { 237 return (d->id.hversion == QUICKSILVER_HVERS); 238 } 239 240 static inline int agp_mode_mercury(void __iomem *hpa) { 241 u64 bus_mode; 242 243 bus_mode = readl(hpa + 0x0620); 244 if (bus_mode & 1) 245 return 1; 246 247 return 0; 248 } 249 250 /* 251 ** I/O SAPIC init function 252 ** Caller knows where an I/O SAPIC is. LBA has an integrated I/O SAPIC. 253 ** Call setup as part of per instance initialization. 254 ** (ie *not* init_module() function unless only one is present.) 255 ** fixup_irq is to initialize PCI IRQ line support and 256 ** virtualize pcidev->irq value. To be called by pci_fixup_bus(). 257 */ 258 extern void *iosapic_register(unsigned long hpa, void __iomem *vaddr); 259 extern int iosapic_fixup_irq(void *obj, struct pci_dev *pcidev); 260 261 #define LBA_FUNC_ID 0x0000 /* function id */ 262 #define LBA_FCLASS 0x0008 /* function class, bist, header, rev... */ 263 #define LBA_CAPABLE 0x0030 /* capabilities register */ 264 265 #define LBA_PCI_CFG_ADDR 0x0040 /* poke CFG address here */ 266 #define LBA_PCI_CFG_DATA 0x0048 /* read or write data here */ 267 268 #define LBA_PMC_MTLT 0x0050 /* Firmware sets this - read only. */ 269 #define LBA_FW_SCRATCH 0x0058 /* Firmware writes the PCI bus number here. */ 270 #define LBA_ERROR_ADDR 0x0070 /* On error, address gets logged here */ 271 272 #define LBA_ARB_MASK 0x0080 /* bit 0 enable arbitration. PAT/PDC enables */ 273 #define LBA_ARB_PRI 0x0088 /* firmware sets this. */ 274 #define LBA_ARB_MODE 0x0090 /* firmware sets this. */ 275 #define LBA_ARB_MTLT 0x0098 /* firmware sets this. */ 276 277 #define LBA_MOD_ID 0x0100 /* Module ID. PDC_PAT_CELL reports 4 */ 278 279 #define LBA_STAT_CTL 0x0108 /* Status & Control */ 280 #define LBA_BUS_RESET 0x01 /* Deassert PCI Bus Reset Signal */ 281 #define CLEAR_ERRLOG 0x10 /* "Clear Error Log" cmd */ 282 #define CLEAR_ERRLOG_ENABLE 0x20 /* "Clear Error Log" Enable */ 283 #define HF_ENABLE 0x40 /* enable HF mode (default is -1 mode) */ 284 285 #define LBA_LMMIO_BASE 0x0200 /* < 4GB I/O address range */ 286 #define LBA_LMMIO_MASK 0x0208 287 288 #define LBA_GMMIO_BASE 0x0210 /* > 4GB I/O address range */ 289 #define LBA_GMMIO_MASK 0x0218 290 291 #define LBA_WLMMIO_BASE 0x0220 /* All < 4GB ranges under the same *SBA* */ 292 #define LBA_WLMMIO_MASK 0x0228 293 294 #define LBA_WGMMIO_BASE 0x0230 /* All > 4GB ranges under the same *SBA* */ 295 #define LBA_WGMMIO_MASK 0x0238 296 297 #define LBA_IOS_BASE 0x0240 /* I/O port space for this LBA */ 298 #define LBA_IOS_MASK 0x0248 299 300 #define LBA_ELMMIO_BASE 0x0250 /* Extra LMMIO range */ 301 #define LBA_ELMMIO_MASK 0x0258 302 303 #define LBA_EIOS_BASE 0x0260 /* Extra I/O port space */ 304 #define LBA_EIOS_MASK 0x0268 305 306 #define LBA_GLOBAL_MASK 0x0270 /* Mercury only: Global Address Mask */ 307 #define LBA_DMA_CTL 0x0278 /* firmware sets this */ 308 309 #define LBA_IBASE 0x0300 /* SBA DMA support */ 310 #define LBA_IMASK 0x0308 311 312 /* FIXME: ignore DMA Hint stuff until we can measure performance */ 313 #define LBA_HINT_CFG 0x0310 314 #define LBA_HINT_BASE 0x0380 /* 14 registers at every 8 bytes. */ 315 316 #define LBA_BUS_MODE 0x0620 317 318 /* ERROR regs are needed for config cycle kluges */ 319 #define LBA_ERROR_CONFIG 0x0680 320 #define LBA_SMART_MODE 0x20 321 #define LBA_ERROR_STATUS 0x0688 322 #define LBA_ROPE_CTL 0x06A0 323 324 #define LBA_IOSAPIC_BASE 0x800 /* Offset of IRQ logic */ 325 326 #endif /*_ASM_PARISC_ROPES_H_*/ 327