xref: /openbmc/linux/arch/parisc/Kconfig (revision 0e73f1ba)
1# SPDX-License-Identifier: GPL-2.0
2config PARISC
3	def_bool y
4	select ALTERNATE_USER_ADDRESS_SPACE
5	select ARCH_32BIT_OFF_T if !64BIT
6	select ARCH_MIGHT_HAVE_PC_PARPORT
7	select HAVE_FUNCTION_TRACER
8	select HAVE_FUNCTION_GRAPH_TRACER
9	select HAVE_SYSCALL_TRACEPOINTS
10	select ARCH_WANT_FRAME_POINTERS
11	select ARCH_HAS_ELF_RANDOMIZE
12	select ARCH_HAS_STRICT_KERNEL_RWX
13	select ARCH_HAS_STRICT_MODULE_RWX
14	select ARCH_HAS_UBSAN_SANITIZE_ALL
15	select ARCH_HAS_PTE_SPECIAL
16	select ARCH_NO_SG_CHAIN
17	select ARCH_SUPPORTS_HUGETLBFS if PA20
18	select ARCH_SUPPORTS_MEMORY_FAILURE
19	select ARCH_STACKWALK
20	select ARCH_HAS_DEBUG_VM_PGTABLE
21	select HAVE_RELIABLE_STACKTRACE
22	select DMA_OPS
23	select RTC_CLASS
24	select RTC_DRV_GENERIC
25	select INIT_ALL_POSSIBLE
26	select BUG
27	select BUILDTIME_TABLE_SORT
28	select HAVE_PCI
29	select HAVE_PERF_EVENTS
30	select HAVE_KERNEL_BZIP2
31	select HAVE_KERNEL_GZIP
32	select HAVE_KERNEL_LZ4
33	select HAVE_KERNEL_LZMA
34	select HAVE_KERNEL_LZO
35	select HAVE_KERNEL_XZ
36	select GENERIC_ATOMIC64 if !64BIT
37	select GENERIC_IRQ_PROBE
38	select GENERIC_PCI_IOMAP
39	select GENERIC_IOREMAP
40	select ARCH_HAVE_NMI_SAFE_CMPXCHG
41	select GENERIC_SMP_IDLE_THREAD
42	select GENERIC_ARCH_TOPOLOGY if SMP
43	select GENERIC_CPU_DEVICES if !SMP
44	select GENERIC_LIB_DEVMEM_IS_ALLOWED
45	select SYSCTL_ARCH_UNALIGN_ALLOW
46	select SYSCTL_EXCEPTION_TRACE
47	select HAVE_MOD_ARCH_SPECIFIC
48	select MODULES_USE_ELF_RELA
49	select CLONE_BACKWARDS
50	select TTY # Needed for pdc_cons.c
51	select HAS_IOPORT if PCI || EISA
52	select HAVE_DEBUG_STACKOVERFLOW
53	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT
54	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
55	select HAVE_ARCH_MMAP_RND_BITS
56	select HAVE_ARCH_AUDITSYSCALL
57	select HAVE_ARCH_HASH
58	select HAVE_ARCH_JUMP_LABEL
59	select HAVE_ARCH_JUMP_LABEL_RELATIVE
60	select HAVE_ARCH_KFENCE
61	select HAVE_ARCH_SECCOMP_FILTER
62	select HAVE_ARCH_TRACEHOOK
63	select HAVE_EBPF_JIT
64	select ARCH_WANT_DEFAULT_BPF_JIT
65	select HAVE_REGS_AND_STACK_ACCESS_API
66	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
67	select GENERIC_SCHED_CLOCK
68	select GENERIC_IRQ_MIGRATION if SMP
69	select HAVE_UNSTABLE_SCHED_CLOCK if SMP
70	select LEGACY_TIMER_TICK
71	select CPU_NO_EFFICIENT_FFS
72	select THREAD_INFO_IN_TASK
73	select NEED_DMA_MAP_STATE
74	select NEED_SG_DMA_LENGTH
75	select HAVE_ARCH_KGDB
76	select HAVE_KPROBES
77	select HAVE_KRETPROBES
78	select HAVE_DYNAMIC_FTRACE if $(cc-option,-fpatchable-function-entry=1,1)
79	select HAVE_FTRACE_MCOUNT_RECORD if HAVE_DYNAMIC_FTRACE
80	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY if DYNAMIC_FTRACE
81	select HAVE_KPROBES_ON_FTRACE
82	select HAVE_DYNAMIC_FTRACE_WITH_REGS
83	select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
84	select TRACE_IRQFLAGS_SUPPORT
85	select HAVE_FUNCTION_DESCRIPTORS if 64BIT
86
87	help
88	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
89	  in many of their workstations & servers (HP9000 700 and 800 series,
90	  and later HP3000 series).  The PA-RISC Linux project home page is
91	  at <https://parisc.wiki.kernel.org>.
92
93config CPU_BIG_ENDIAN
94	def_bool y
95
96config MMU
97	def_bool y
98
99config STACK_GROWSUP
100	def_bool y
101
102config GENERIC_LOCKBREAK
103	bool
104	default y
105	depends on SMP && PREEMPTION
106
107config ARCH_HAS_ILOG2_U32
108	bool
109	default n
110
111config ARCH_HAS_ILOG2_U64
112	bool
113	default n
114
115config GENERIC_BUG
116	def_bool y
117	depends on BUG
118	select GENERIC_BUG_RELATIVE_POINTERS if 64BIT
119
120config GENERIC_BUG_RELATIVE_POINTERS
121	bool
122
123config GENERIC_HWEIGHT
124	bool
125	default y
126
127config GENERIC_CALIBRATE_DELAY
128	bool
129	default y
130
131config TIME_LOW_RES
132	bool
133	depends on SMP
134	default y
135
136config ARCH_MMAP_RND_BITS_MIN
137	default 18 if 64BIT
138	default 8
139
140config ARCH_MMAP_RND_COMPAT_BITS_MIN
141	default 8
142
143config ARCH_MMAP_RND_BITS_MAX
144	default 18 if 64BIT
145	default 13
146
147config ARCH_MMAP_RND_COMPAT_BITS_MAX
148	default 13
149
150# unless you want to implement ACPI on PA-RISC ... ;-)
151config PM
152	bool
153
154config STACKTRACE_SUPPORT
155	def_bool y
156
157config LOCKDEP_SUPPORT
158	bool
159	default y
160
161config ISA_DMA_API
162	bool
163
164config ARCH_MAY_HAVE_PC_FDC
165	bool
166	depends on BROKEN
167	default y
168
169config PGTABLE_LEVELS
170	int
171	default 3 if 64BIT && PARISC_PAGE_SIZE_4KB
172	default 2
173
174menu "Processor type and features"
175
176choice
177	prompt "Processor type"
178	default PA7000 if "$(ARCH)" = "parisc"
179
180config PA7000
181	bool "PA7000/PA7100" if "$(ARCH)" = "parisc"
182	help
183	  This is the processor type of your CPU.  This information is
184	  used for optimizing purposes.  In order to compile a kernel
185	  that can run on all 32-bit PA CPUs (albeit not optimally fast),
186	  you can specify "PA7000" here.
187
188	  Specifying "PA8000" here will allow you to select a 64-bit kernel
189	  which is required on some machines.
190
191config PA7100LC
192	bool "PA7100LC" if "$(ARCH)" = "parisc"
193	help
194	  Select this option for the PCX-L processor, as used in the
195	  712, 715/64, 715/80, 715/100, 715/100XC, 725/100, 743, 748,
196	  D200, D210, D300, D310 and E-class
197
198config PA7200
199	bool "PA7200" if "$(ARCH)" = "parisc"
200	help
201	  Select this option for the PCX-T' processor, as used in the
202	  C100, C110, J100, J110, J210XC, D250, D260, D350, D360,
203	  K100, K200, K210, K220, K400, K410 and K420
204
205config PA7300LC
206	bool "PA7300LC" if "$(ARCH)" = "parisc"
207	help
208	  Select this option for the PCX-L2 processor, as used in the
209	  744, A180, B132L, B160L, B180L, C132L, C160L, C180L,
210	  D220, D230, D320 and D330.
211
212config PA8X00
213	bool "PA8000 and up"
214	help
215	  Select this option for PCX-U to PCX-W2 processors.
216
217endchoice
218
219# Define implied options from the CPU selection here
220
221config PA20
222	def_bool y
223	depends on PA8X00
224
225config PA11
226	def_bool y
227	depends on PA7000 || PA7100LC || PA7200 || PA7300LC
228	select ARCH_HAS_SYNC_DMA_FOR_CPU
229	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
230
231config PREFETCH
232	def_bool y
233	depends on PA8X00 || PA7200
234
235config PARISC_HUGE_KERNEL
236	def_bool y if !MODULES || UBSAN || FTRACE || COMPILE_TEST
237
238config MLONGCALLS
239	def_bool y if PARISC_HUGE_KERNEL
240	bool "Enable the -mlong-calls compiler option for big kernels" if !PARISC_HUGE_KERNEL
241	depends on PA8X00
242	help
243	  If you configure the kernel to include many drivers built-in instead
244	  as modules, the kernel executable may become too big, so that the
245	  linker will not be able to resolve some long branches and fails to link
246	  your vmlinux kernel. In that case enabling this option will help you
247	  to overcome this limit by using the -mlong-calls compiler option.
248
249	  Usually you want to say N here, unless you e.g. want to build
250	  a kernel which includes all necessary drivers built-in and which can
251	  be used for TFTP booting without the need to have an initrd ramdisk.
252
253	  Enabling this option will probably slow down your kernel.
254
255config 64BIT
256	def_bool y if "$(ARCH)" = "parisc64"
257	bool "64-bit kernel" if "$(ARCH)" = "parisc"
258	depends on PA8X00
259	help
260	  Enable this if you want to support 64bit kernel on PA-RISC platform.
261
262	  At the moment, only people willing to use more than 2GB of RAM,
263	  or having a 64bit-only capable PA-RISC machine should say Y here.
264
265	  Since there is no 64bit userland on PA-RISC, there is no point to
266	  enable this option otherwise. The 64bit kernel is significantly bigger
267	  and slower than the 32bit one.
268
269choice
270	prompt "Kernel page size"
271	default PARISC_PAGE_SIZE_4KB
272
273config PARISC_PAGE_SIZE_4KB
274	bool "4KB"
275	help
276	  This lets you select the page size of the kernel.  For best
277	  performance, a page size of 16KB is recommended.  For best
278	  compatibility with 32bit applications, a page size of 4KB should be
279	  selected (the vast majority of 32bit binaries work perfectly fine
280	  with a larger page size).
281
282	  4KB                For best 32bit compatibility
283	  16KB               For best performance
284	  64KB               For best performance, might give more overhead.
285
286	  If you don't know what to do, choose 4KB.
287
288config PARISC_PAGE_SIZE_16KB
289	bool "16KB"
290	depends on PA8X00 && BROKEN && !KFENCE
291
292config PARISC_PAGE_SIZE_64KB
293	bool "64KB"
294	depends on PA8X00 && BROKEN && !KFENCE
295
296endchoice
297
298config SMP
299	bool "Symmetric multi-processing support"
300	help
301	  This enables support for systems with more than one CPU. If you have
302	  a system with only one CPU, say N. If you have a system with more
303	  than one CPU, say Y.
304
305	  If you say N here, the kernel will run on uni- and multiprocessor
306	  machines, but will use only one CPU of a multiprocessor machine.
307	  On a uniprocessor machine, the kernel will run faster if you say N.
308
309	  See also <file:Documentation/admin-guide/lockup-watchdogs.rst> and the SMP-HOWTO
310	  available at <https://www.tldp.org/docs.html#howto>.
311
312	  If you don't know what to do here, say N.
313
314config SCHED_MC
315	bool "Multi-core scheduler support"
316	depends on GENERIC_ARCH_TOPOLOGY && PA8X00
317	help
318	  Multi-core scheduler support improves the CPU scheduler's decision
319	  making when dealing with multi-core CPU chips at a cost of slightly
320	  increased overhead in some places. If unsure say N here.
321
322config IRQSTACKS
323	bool "Use separate kernel stacks when processing interrupts"
324	default y
325	help
326	  If you say Y here the kernel will use separate kernel stacks
327	  for handling hard and soft interrupts.  This can help avoid
328	  overflowing the process kernel stacks.
329
330config HOTPLUG_CPU
331	bool
332	default y if SMP
333
334config ARCH_SELECT_MEMORY_MODEL
335	def_bool y
336	depends on 64BIT
337
338config ARCH_SPARSEMEM_ENABLE
339	def_bool y
340	depends on 64BIT
341
342config ARCH_FLATMEM_ENABLE
343	def_bool y
344
345config ARCH_SPARSEMEM_DEFAULT
346	def_bool y
347	depends on ARCH_SPARSEMEM_ENABLE
348
349source "kernel/Kconfig.hz"
350
351config COMPAT
352	def_bool y
353	depends on 64BIT
354
355config AUDIT_ARCH
356	def_bool y
357
358config NR_CPUS
359	int "Maximum number of CPUs (2-32)"
360	range 2 32
361	depends on SMP
362	default "8" if 64BIT
363	default "16"
364
365endmenu
366
367config ARCH_SUPPORTS_KEXEC
368	def_bool y
369
370config ARCH_SUPPORTS_KEXEC_FILE
371	def_bool y
372
373config ARCH_SELECTS_KEXEC_FILE
374	def_bool y
375	depends on KEXEC_FILE
376	select KEXEC_ELF
377
378source "drivers/parisc/Kconfig"
379