1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * OpenRISC setup.c 4 * 5 * Linux architectural port borrowing liberally from similar works of 6 * others. All original copyrights apply as per the original source 7 * declaration. 8 * 9 * Modifications for the OpenRISC architecture: 10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> 11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> 12 * 13 * This file handles the architecture-dependent parts of initialization 14 */ 15 16 #include <linux/errno.h> 17 #include <linux/sched.h> 18 #include <linux/kernel.h> 19 #include <linux/mm.h> 20 #include <linux/stddef.h> 21 #include <linux/unistd.h> 22 #include <linux/ptrace.h> 23 #include <linux/slab.h> 24 #include <linux/tty.h> 25 #include <linux/ioport.h> 26 #include <linux/delay.h> 27 #include <linux/console.h> 28 #include <linux/init.h> 29 #include <linux/memblock.h> 30 #include <linux/seq_file.h> 31 #include <linux/serial.h> 32 #include <linux/initrd.h> 33 #include <linux/of_fdt.h> 34 #include <linux/of.h> 35 #include <linux/device.h> 36 37 #include <asm/sections.h> 38 #include <asm/pgtable.h> 39 #include <asm/types.h> 40 #include <asm/setup.h> 41 #include <asm/io.h> 42 #include <asm/cpuinfo.h> 43 #include <asm/delay.h> 44 45 #include "vmlinux.h" 46 47 static void __init setup_memory(void) 48 { 49 unsigned long ram_start_pfn; 50 unsigned long ram_end_pfn; 51 phys_addr_t memory_start, memory_end; 52 struct memblock_region *region; 53 54 memory_end = memory_start = 0; 55 56 /* Find main memory where is the kernel, we assume its the only one */ 57 for_each_memblock(memory, region) { 58 memory_start = region->base; 59 memory_end = region->base + region->size; 60 printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__, 61 memory_start, memory_end); 62 } 63 64 if (!memory_end) { 65 panic("No memory!"); 66 } 67 68 ram_start_pfn = PFN_UP(memory_start); 69 ram_end_pfn = PFN_DOWN(memblock_end_of_DRAM()); 70 71 /* setup bootmem globals (we use no_bootmem, but mm still depends on this) */ 72 min_low_pfn = ram_start_pfn; 73 max_low_pfn = ram_end_pfn; 74 max_pfn = ram_end_pfn; 75 76 /* 77 * initialize the boot-time allocator (with low memory only). 78 * 79 * This makes the memory from the end of the kernel to the end of 80 * RAM usable. 81 */ 82 memblock_reserve(__pa(_stext), _end - _stext); 83 84 early_init_fdt_reserve_self(); 85 early_init_fdt_scan_reserved_mem(); 86 87 memblock_dump_all(); 88 } 89 90 struct cpuinfo_or1k cpuinfo_or1k[NR_CPUS]; 91 92 static void print_cpuinfo(void) 93 { 94 unsigned long upr = mfspr(SPR_UPR); 95 unsigned long vr = mfspr(SPR_VR); 96 unsigned int version; 97 unsigned int revision; 98 struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[smp_processor_id()]; 99 100 version = (vr & SPR_VR_VER) >> 24; 101 revision = (vr & SPR_VR_REV); 102 103 printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n", 104 version, revision, cpuinfo->clock_frequency / 1000000); 105 106 if (!(upr & SPR_UPR_UP)) { 107 printk(KERN_INFO 108 "-- no UPR register... unable to detect configuration\n"); 109 return; 110 } 111 112 if (upr & SPR_UPR_DCP) 113 printk(KERN_INFO 114 "-- dcache: %4d bytes total, %2d bytes/line, %d way(s)\n", 115 cpuinfo->dcache_size, cpuinfo->dcache_block_size, 116 cpuinfo->dcache_ways); 117 else 118 printk(KERN_INFO "-- dcache disabled\n"); 119 if (upr & SPR_UPR_ICP) 120 printk(KERN_INFO 121 "-- icache: %4d bytes total, %2d bytes/line, %d way(s)\n", 122 cpuinfo->icache_size, cpuinfo->icache_block_size, 123 cpuinfo->icache_ways); 124 else 125 printk(KERN_INFO "-- icache disabled\n"); 126 127 if (upr & SPR_UPR_DMP) 128 printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n", 129 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2), 130 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW)); 131 if (upr & SPR_UPR_IMP) 132 printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n", 133 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2), 134 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW)); 135 136 printk(KERN_INFO "-- additional features:\n"); 137 if (upr & SPR_UPR_DUP) 138 printk(KERN_INFO "-- debug unit\n"); 139 if (upr & SPR_UPR_PCUP) 140 printk(KERN_INFO "-- performance counters\n"); 141 if (upr & SPR_UPR_PMP) 142 printk(KERN_INFO "-- power management\n"); 143 if (upr & SPR_UPR_PICP) 144 printk(KERN_INFO "-- PIC\n"); 145 if (upr & SPR_UPR_TTP) 146 printk(KERN_INFO "-- timer\n"); 147 if (upr & SPR_UPR_CUP) 148 printk(KERN_INFO "-- custom unit(s)\n"); 149 } 150 151 static struct device_node *setup_find_cpu_node(int cpu) 152 { 153 u32 hwid; 154 struct device_node *cpun; 155 156 for_each_of_cpu_node(cpun) { 157 if (of_property_read_u32(cpun, "reg", &hwid)) 158 continue; 159 if (hwid == cpu) 160 return cpun; 161 } 162 163 return NULL; 164 } 165 166 void __init setup_cpuinfo(void) 167 { 168 struct device_node *cpu; 169 unsigned long iccfgr, dccfgr; 170 unsigned long cache_set_size; 171 int cpu_id = smp_processor_id(); 172 struct cpuinfo_or1k *cpuinfo = &cpuinfo_or1k[cpu_id]; 173 174 cpu = setup_find_cpu_node(cpu_id); 175 if (!cpu) 176 panic("Couldn't find CPU%d in device tree...\n", cpu_id); 177 178 iccfgr = mfspr(SPR_ICCFGR); 179 cpuinfo->icache_ways = 1 << (iccfgr & SPR_ICCFGR_NCW); 180 cache_set_size = 1 << ((iccfgr & SPR_ICCFGR_NCS) >> 3); 181 cpuinfo->icache_block_size = 16 << ((iccfgr & SPR_ICCFGR_CBS) >> 7); 182 cpuinfo->icache_size = 183 cache_set_size * cpuinfo->icache_ways * cpuinfo->icache_block_size; 184 185 dccfgr = mfspr(SPR_DCCFGR); 186 cpuinfo->dcache_ways = 1 << (dccfgr & SPR_DCCFGR_NCW); 187 cache_set_size = 1 << ((dccfgr & SPR_DCCFGR_NCS) >> 3); 188 cpuinfo->dcache_block_size = 16 << ((dccfgr & SPR_DCCFGR_CBS) >> 7); 189 cpuinfo->dcache_size = 190 cache_set_size * cpuinfo->dcache_ways * cpuinfo->dcache_block_size; 191 192 if (of_property_read_u32(cpu, "clock-frequency", 193 &cpuinfo->clock_frequency)) { 194 printk(KERN_WARNING 195 "Device tree missing CPU 'clock-frequency' parameter." 196 "Assuming frequency 25MHZ" 197 "This is probably not what you want."); 198 } 199 200 cpuinfo->coreid = mfspr(SPR_COREID); 201 202 of_node_put(cpu); 203 204 print_cpuinfo(); 205 } 206 207 /** 208 * or32_early_setup 209 * 210 * Handles the pointer to the device tree that this kernel is to use 211 * for establishing the available platform devices. 212 * 213 * Falls back on built-in device tree in case null pointer is passed. 214 */ 215 216 void __init or32_early_setup(void *fdt) 217 { 218 if (fdt) 219 pr_info("FDT at %p\n", fdt); 220 else { 221 fdt = __dtb_start; 222 pr_info("Compiled-in FDT at %p\n", fdt); 223 } 224 early_init_devtree(fdt); 225 } 226 227 static inline unsigned long extract_value_bits(unsigned long reg, 228 short bit_nr, short width) 229 { 230 return (reg >> bit_nr) & (0 << width); 231 } 232 233 static inline unsigned long extract_value(unsigned long reg, unsigned long mask) 234 { 235 while (!(mask & 0x1)) { 236 reg = reg >> 1; 237 mask = mask >> 1; 238 } 239 return mask & reg; 240 } 241 242 void __init detect_unit_config(unsigned long upr, unsigned long mask, 243 char *text, void (*func) (void)) 244 { 245 if (text != NULL) 246 printk("%s", text); 247 248 if (upr & mask) { 249 if (func != NULL) 250 func(); 251 else 252 printk("present\n"); 253 } else 254 printk("not present\n"); 255 } 256 257 /* 258 * calibrate_delay 259 * 260 * Lightweight calibrate_delay implementation that calculates loops_per_jiffy 261 * from the clock frequency passed in via the device tree 262 * 263 */ 264 265 void calibrate_delay(void) 266 { 267 const int *val; 268 struct device_node *cpu = setup_find_cpu_node(smp_processor_id()); 269 270 val = of_get_property(cpu, "clock-frequency", NULL); 271 if (!val) 272 panic("no cpu 'clock-frequency' parameter in device tree"); 273 loops_per_jiffy = *val / HZ; 274 pr_cont("%lu.%02lu BogoMIPS (lpj=%lu)\n", 275 loops_per_jiffy / (500000 / HZ), 276 (loops_per_jiffy / (5000 / HZ)) % 100, loops_per_jiffy); 277 } 278 279 void __init setup_arch(char **cmdline_p) 280 { 281 unflatten_and_copy_device_tree(); 282 283 setup_cpuinfo(); 284 285 #ifdef CONFIG_SMP 286 smp_init_cpus(); 287 #endif 288 289 /* process 1's initial memory region is the kernel code/data */ 290 init_mm.start_code = (unsigned long)_stext; 291 init_mm.end_code = (unsigned long)_etext; 292 init_mm.end_data = (unsigned long)_edata; 293 init_mm.brk = (unsigned long)_end; 294 295 #ifdef CONFIG_BLK_DEV_INITRD 296 initrd_start = (unsigned long)&__initrd_start; 297 initrd_end = (unsigned long)&__initrd_end; 298 if (initrd_start == initrd_end) { 299 initrd_start = 0; 300 initrd_end = 0; 301 } 302 initrd_below_start_ok = 1; 303 #endif 304 305 /* setup memblock allocator */ 306 setup_memory(); 307 308 /* paging_init() sets up the MMU and marks all pages as reserved */ 309 paging_init(); 310 311 #if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE) 312 if (!conswitchp) 313 conswitchp = &dummy_con; 314 #endif 315 316 *cmdline_p = boot_command_line; 317 318 printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n"); 319 } 320 321 static int show_cpuinfo(struct seq_file *m, void *v) 322 { 323 unsigned int vr, cpucfgr; 324 unsigned int avr; 325 unsigned int version; 326 struct cpuinfo_or1k *cpuinfo = v; 327 328 vr = mfspr(SPR_VR); 329 cpucfgr = mfspr(SPR_CPUCFGR); 330 331 #ifdef CONFIG_SMP 332 seq_printf(m, "processor\t\t: %d\n", cpuinfo->coreid); 333 #endif 334 if (vr & SPR_VR_UVRP) { 335 vr = mfspr(SPR_VR2); 336 version = vr & SPR_VR2_VER; 337 avr = mfspr(SPR_AVR); 338 seq_printf(m, "cpu architecture\t: " 339 "OpenRISC 1000 (%d.%d-rev%d)\n", 340 (avr >> 24) & 0xff, 341 (avr >> 16) & 0xff, 342 (avr >> 8) & 0xff); 343 seq_printf(m, "cpu implementation id\t: 0x%x\n", 344 (vr & SPR_VR2_CPUID) >> 24); 345 seq_printf(m, "cpu version\t\t: 0x%x\n", version); 346 } else { 347 version = (vr & SPR_VR_VER) >> 24; 348 seq_printf(m, "cpu\t\t\t: OpenRISC-%x\n", version); 349 seq_printf(m, "revision\t\t: %d\n", vr & SPR_VR_REV); 350 } 351 seq_printf(m, "frequency\t\t: %ld\n", loops_per_jiffy * HZ); 352 seq_printf(m, "dcache size\t\t: %d bytes\n", cpuinfo->dcache_size); 353 seq_printf(m, "dcache block size\t: %d bytes\n", 354 cpuinfo->dcache_block_size); 355 seq_printf(m, "dcache ways\t\t: %d\n", cpuinfo->dcache_ways); 356 seq_printf(m, "icache size\t\t: %d bytes\n", cpuinfo->icache_size); 357 seq_printf(m, "icache block size\t: %d bytes\n", 358 cpuinfo->icache_block_size); 359 seq_printf(m, "icache ways\t\t: %d\n", cpuinfo->icache_ways); 360 seq_printf(m, "immu\t\t\t: %d entries, %lu ways\n", 361 1 << ((mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTS) >> 2), 362 1 + (mfspr(SPR_DMMUCFGR) & SPR_DMMUCFGR_NTW)); 363 seq_printf(m, "dmmu\t\t\t: %d entries, %lu ways\n", 364 1 << ((mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTS) >> 2), 365 1 + (mfspr(SPR_IMMUCFGR) & SPR_IMMUCFGR_NTW)); 366 seq_printf(m, "bogomips\t\t: %lu.%02lu\n", 367 (loops_per_jiffy * HZ) / 500000, 368 ((loops_per_jiffy * HZ) / 5000) % 100); 369 370 seq_puts(m, "features\t\t: "); 371 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB32S ? "orbis32" : ""); 372 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OB64S ? "orbis64" : ""); 373 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF32S ? "orfpx32" : ""); 374 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OF64S ? "orfpx64" : ""); 375 seq_printf(m, "%s ", cpucfgr & SPR_CPUCFGR_OV64S ? "orvdx64" : ""); 376 seq_puts(m, "\n"); 377 378 seq_puts(m, "\n"); 379 380 return 0; 381 } 382 383 static void *c_start(struct seq_file *m, loff_t *pos) 384 { 385 *pos = cpumask_next(*pos - 1, cpu_online_mask); 386 if ((*pos) < nr_cpu_ids) 387 return &cpuinfo_or1k[*pos]; 388 return NULL; 389 } 390 391 static void *c_next(struct seq_file *m, void *v, loff_t *pos) 392 { 393 (*pos)++; 394 return c_start(m, pos); 395 } 396 397 static void c_stop(struct seq_file *m, void *v) 398 { 399 } 400 401 const struct seq_operations cpuinfo_op = { 402 .start = c_start, 403 .next = c_next, 404 .stop = c_stop, 405 .show = show_cpuinfo, 406 }; 407