1/* 2 * OpenRISC entry.S 3 * 4 * Linux architectural port borrowing liberally from similar works of 5 * others. All original copyrights apply as per the original source 6 * declaration. 7 * 8 * Modifications for the OpenRISC architecture: 9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> 10 * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com> 11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License 15 * as published by the Free Software Foundation; either version 16 * 2 of the License, or (at your option) any later version. 17 */ 18 19#include <linux/linkage.h> 20 21#include <asm/processor.h> 22#include <asm/unistd.h> 23#include <asm/thread_info.h> 24#include <asm/errno.h> 25#include <asm/spr_defs.h> 26#include <asm/page.h> 27#include <asm/mmu.h> 28#include <asm/pgtable.h> 29#include <asm/asm-offsets.h> 30 31#define DISABLE_INTERRUPTS(t1,t2) \ 32 l.mfspr t2,r0,SPR_SR ;\ 33 l.movhi t1,hi(~(SPR_SR_IEE|SPR_SR_TEE)) ;\ 34 l.ori t1,t1,lo(~(SPR_SR_IEE|SPR_SR_TEE)) ;\ 35 l.and t2,t2,t1 ;\ 36 l.mtspr r0,t2,SPR_SR 37 38#define ENABLE_INTERRUPTS(t1) \ 39 l.mfspr t1,r0,SPR_SR ;\ 40 l.ori t1,t1,lo(SPR_SR_IEE|SPR_SR_TEE) ;\ 41 l.mtspr r0,t1,SPR_SR 42 43/* =========================================================[ macros ]=== */ 44 45/* 46 * We need to disable interrupts at beginning of RESTORE_ALL 47 * since interrupt might come in after we've loaded EPC return address 48 * and overwrite EPC with address somewhere in RESTORE_ALL 49 * which is of course wrong! 50 */ 51 52#define RESTORE_ALL \ 53 DISABLE_INTERRUPTS(r3,r4) ;\ 54 l.lwz r3,PT_PC(r1) ;\ 55 l.mtspr r0,r3,SPR_EPCR_BASE ;\ 56 l.lwz r3,PT_SR(r1) ;\ 57 l.mtspr r0,r3,SPR_ESR_BASE ;\ 58 l.lwz r2,PT_GPR2(r1) ;\ 59 l.lwz r3,PT_GPR3(r1) ;\ 60 l.lwz r4,PT_GPR4(r1) ;\ 61 l.lwz r5,PT_GPR5(r1) ;\ 62 l.lwz r6,PT_GPR6(r1) ;\ 63 l.lwz r7,PT_GPR7(r1) ;\ 64 l.lwz r8,PT_GPR8(r1) ;\ 65 l.lwz r9,PT_GPR9(r1) ;\ 66 l.lwz r10,PT_GPR10(r1) ;\ 67 l.lwz r11,PT_GPR11(r1) ;\ 68 l.lwz r12,PT_GPR12(r1) ;\ 69 l.lwz r13,PT_GPR13(r1) ;\ 70 l.lwz r14,PT_GPR14(r1) ;\ 71 l.lwz r15,PT_GPR15(r1) ;\ 72 l.lwz r16,PT_GPR16(r1) ;\ 73 l.lwz r17,PT_GPR17(r1) ;\ 74 l.lwz r18,PT_GPR18(r1) ;\ 75 l.lwz r19,PT_GPR19(r1) ;\ 76 l.lwz r20,PT_GPR20(r1) ;\ 77 l.lwz r21,PT_GPR21(r1) ;\ 78 l.lwz r22,PT_GPR22(r1) ;\ 79 l.lwz r23,PT_GPR23(r1) ;\ 80 l.lwz r24,PT_GPR24(r1) ;\ 81 l.lwz r25,PT_GPR25(r1) ;\ 82 l.lwz r26,PT_GPR26(r1) ;\ 83 l.lwz r27,PT_GPR27(r1) ;\ 84 l.lwz r28,PT_GPR28(r1) ;\ 85 l.lwz r29,PT_GPR29(r1) ;\ 86 l.lwz r30,PT_GPR30(r1) ;\ 87 l.lwz r31,PT_GPR31(r1) ;\ 88 l.lwz r1,PT_SP(r1) ;\ 89 l.rfe 90 91 92#define EXCEPTION_ENTRY(handler) \ 93 .global handler ;\ 94handler: ;\ 95 /* r1, EPCR, ESR a already saved */ ;\ 96 l.sw PT_GPR2(r1),r2 ;\ 97 l.sw PT_GPR3(r1),r3 ;\ 98 /* r4 already save */ ;\ 99 l.sw PT_GPR5(r1),r5 ;\ 100 l.sw PT_GPR6(r1),r6 ;\ 101 l.sw PT_GPR7(r1),r7 ;\ 102 l.sw PT_GPR8(r1),r8 ;\ 103 l.sw PT_GPR9(r1),r9 ;\ 104 /* r10 already saved */ ;\ 105 l.sw PT_GPR11(r1),r11 ;\ 106 /* r12 already saved */ ;\ 107 l.sw PT_GPR13(r1),r13 ;\ 108 l.sw PT_GPR14(r1),r14 ;\ 109 l.sw PT_GPR15(r1),r15 ;\ 110 l.sw PT_GPR16(r1),r16 ;\ 111 l.sw PT_GPR17(r1),r17 ;\ 112 l.sw PT_GPR18(r1),r18 ;\ 113 l.sw PT_GPR19(r1),r19 ;\ 114 l.sw PT_GPR20(r1),r20 ;\ 115 l.sw PT_GPR21(r1),r21 ;\ 116 l.sw PT_GPR22(r1),r22 ;\ 117 l.sw PT_GPR23(r1),r23 ;\ 118 l.sw PT_GPR24(r1),r24 ;\ 119 l.sw PT_GPR25(r1),r25 ;\ 120 l.sw PT_GPR26(r1),r26 ;\ 121 l.sw PT_GPR27(r1),r27 ;\ 122 l.sw PT_GPR28(r1),r28 ;\ 123 l.sw PT_GPR29(r1),r29 ;\ 124 /* r30 already save */ ;\ 125/* l.sw PT_GPR30(r1),r30*/ ;\ 126 l.sw PT_GPR31(r1),r31 ;\ 127 /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\ 128 l.addi r30,r0,-1 ;\ 129 l.sw PT_ORIG_GPR11(r1),r30 130 131#define UNHANDLED_EXCEPTION(handler,vector) \ 132 .global handler ;\ 133handler: ;\ 134 /* r1, EPCR, ESR already saved */ ;\ 135 l.sw PT_GPR2(r1),r2 ;\ 136 l.sw PT_GPR3(r1),r3 ;\ 137 l.sw PT_GPR5(r1),r5 ;\ 138 l.sw PT_GPR6(r1),r6 ;\ 139 l.sw PT_GPR7(r1),r7 ;\ 140 l.sw PT_GPR8(r1),r8 ;\ 141 l.sw PT_GPR9(r1),r9 ;\ 142 /* r10 already saved */ ;\ 143 l.sw PT_GPR11(r1),r11 ;\ 144 /* r12 already saved */ ;\ 145 l.sw PT_GPR13(r1),r13 ;\ 146 l.sw PT_GPR14(r1),r14 ;\ 147 l.sw PT_GPR15(r1),r15 ;\ 148 l.sw PT_GPR16(r1),r16 ;\ 149 l.sw PT_GPR17(r1),r17 ;\ 150 l.sw PT_GPR18(r1),r18 ;\ 151 l.sw PT_GPR19(r1),r19 ;\ 152 l.sw PT_GPR20(r1),r20 ;\ 153 l.sw PT_GPR21(r1),r21 ;\ 154 l.sw PT_GPR22(r1),r22 ;\ 155 l.sw PT_GPR23(r1),r23 ;\ 156 l.sw PT_GPR24(r1),r24 ;\ 157 l.sw PT_GPR25(r1),r25 ;\ 158 l.sw PT_GPR26(r1),r26 ;\ 159 l.sw PT_GPR27(r1),r27 ;\ 160 l.sw PT_GPR28(r1),r28 ;\ 161 l.sw PT_GPR29(r1),r29 ;\ 162 /* r31 already saved */ ;\ 163 l.sw PT_GPR30(r1),r30 ;\ 164/* l.sw PT_GPR31(r1),r31 */ ;\ 165 /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\ 166 l.addi r30,r0,-1 ;\ 167 l.sw PT_ORIG_GPR11(r1),r30 ;\ 168 l.addi r3,r1,0 ;\ 169 /* r4 is exception EA */ ;\ 170 l.addi r5,r0,vector ;\ 171 l.jal unhandled_exception ;\ 172 l.nop ;\ 173 l.j _ret_from_exception ;\ 174 l.nop 175 176/* 177 * NOTE: one should never assume that SPR_EPC, SPR_ESR, SPR_EEAR 178 * contain the same values as when exception we're handling 179 * occured. in fact they never do. if you need them use 180 * values saved on stack (for SPR_EPC, SPR_ESR) or content 181 * of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE() 182 * in 'arch/or32/kernel/head.S' 183 */ 184 185/* =====================================================[ exceptions] === */ 186 187/* ---[ 0x100: RESET exception ]----------------------------------------- */ 188 189EXCEPTION_ENTRY(_tng_kernel_start) 190 l.jal _start 191 l.andi r0,r0,0 192 193/* ---[ 0x200: BUS exception ]------------------------------------------- */ 194 195EXCEPTION_ENTRY(_bus_fault_handler) 196 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 197 l.jal do_bus_fault 198 l.addi r3,r1,0 /* pt_regs */ 199 200 l.j _ret_from_exception 201 l.nop 202 203/* ---[ 0x300: Data Page Fault exception ]------------------------------- */ 204EXCEPTION_ENTRY(_dtlb_miss_page_fault_handler) 205 l.and r5,r5,r0 206 l.j 1f 207 l.nop 208 209EXCEPTION_ENTRY(_data_page_fault_handler) 210 /* set up parameters for do_page_fault */ 211 l.ori r5,r0,0x300 // exception vector 2121: 213 l.addi r3,r1,0 // pt_regs 214 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault 215 216 /* 217 * __PHX__: TODO 218 * 219 * all this can be written much simpler. look at 220 * DTLB miss handler in the CONFIG_GUARD_PROTECTED_CORE part 221 */ 222#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX 223 l.lwz r6,PT_PC(r3) // address of an offending insn 224 l.lwz r6,0(r6) // instruction that caused pf 225 226 l.srli r6,r6,26 // check opcode for jump insn 227 l.sfeqi r6,0 // l.j 228 l.bf 8f 229 l.sfeqi r6,1 // l.jal 230 l.bf 8f 231 l.sfeqi r6,3 // l.bnf 232 l.bf 8f 233 l.sfeqi r6,4 // l.bf 234 l.bf 8f 235 l.sfeqi r6,0x11 // l.jr 236 l.bf 8f 237 l.sfeqi r6,0x12 // l.jalr 238 l.bf 8f 239 240 l.nop 241 242 l.j 9f 243 l.nop 2448: 245 246 l.lwz r6,PT_PC(r3) // address of an offending insn 247 l.addi r6,r6,4 248 l.lwz r6,0(r6) // instruction that caused pf 249 l.srli r6,r6,26 // get opcode 2509: 251 252#else 253 254 l.mfspr r6,r0,SPR_SR // SR 255// l.lwz r6,PT_SR(r3) // ESR 256 l.andi r6,r6,SPR_SR_DSX // check for delay slot exception 257 l.sfeqi r6,0x1 // exception happened in delay slot 258 l.bnf 7f 259 l.lwz r6,PT_PC(r3) // address of an offending insn 260 261 l.addi r6,r6,4 // offending insn is in delay slot 2627: 263 l.lwz r6,0(r6) // instruction that caused pf 264 l.srli r6,r6,26 // check opcode for write access 265#endif 266 267 l.sfgeui r6,0x33 // check opcode for write access 268 l.bnf 1f 269 l.sfleui r6,0x37 270 l.bnf 1f 271 l.ori r6,r0,0x1 // write access 272 l.j 2f 273 l.nop 2741: l.ori r6,r0,0x0 // !write access 2752: 276 277 /* call fault.c handler in or32/mm/fault.c */ 278 l.jal do_page_fault 279 l.nop 280 l.j _ret_from_exception 281 l.nop 282 283/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */ 284EXCEPTION_ENTRY(_itlb_miss_page_fault_handler) 285 l.and r5,r5,r0 286 l.j 1f 287 l.nop 288 289EXCEPTION_ENTRY(_insn_page_fault_handler) 290 /* set up parameters for do_page_fault */ 291 l.ori r5,r0,0x400 // exception vector 2921: 293 l.addi r3,r1,0 // pt_regs 294 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault 295 l.ori r6,r0,0x0 // !write access 296 297 /* call fault.c handler in or32/mm/fault.c */ 298 l.jal do_page_fault 299 l.nop 300 l.j _ret_from_exception 301 l.nop 302 303 304/* ---[ 0x500: Timer exception ]----------------------------------------- */ 305 306EXCEPTION_ENTRY(_timer_handler) 307 l.jal timer_interrupt 308 l.addi r3,r1,0 /* pt_regs */ 309 310 l.j _ret_from_intr 311 l.nop 312 313/* ---[ 0x600: Aligment exception ]-------------------------------------- */ 314 315EXCEPTION_ENTRY(_alignment_handler) 316 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 317 l.jal do_unaligned_access 318 l.addi r3,r1,0 /* pt_regs */ 319 320 l.j _ret_from_exception 321 l.nop 322 323#if 0 324EXCEPTION_ENTRY(_aligment_handler) 325// l.mfspr r2,r0,SPR_EEAR_BASE /* Load the efective addres */ 326 l.addi r2,r4,0 327// l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */ 328 l.lwz r5,PT_PC(r1) 329 330 l.lwz r3,0(r5) /* Load insn */ 331 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 332 333 l.sfeqi r4,0x00 /* Check if the load/store insn is in delay slot */ 334 l.bf jmp 335 l.sfeqi r4,0x01 336 l.bf jmp 337 l.sfeqi r4,0x03 338 l.bf jmp 339 l.sfeqi r4,0x04 340 l.bf jmp 341 l.sfeqi r4,0x11 342 l.bf jr 343 l.sfeqi r4,0x12 344 l.bf jr 345 l.nop 346 l.j 1f 347 l.addi r5,r5,4 /* Increment PC to get return insn address */ 348 349jmp: 350 l.slli r4,r3,6 /* Get the signed extended jump length */ 351 l.srai r4,r4,4 352 353 l.lwz r3,4(r5) /* Load the real load/store insn */ 354 355 l.add r5,r5,r4 /* Calculate jump target address */ 356 357 l.j 1f 358 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 359 360jr: 361 l.slli r4,r3,9 /* Shift to get the reg nb */ 362 l.andi r4,r4,0x7c 363 364 l.lwz r3,4(r5) /* Load the real load/store insn */ 365 366 l.add r4,r4,r1 /* Load the jump register value from the stack */ 367 l.lwz r5,0(r4) 368 369 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 370 371 3721: 373// l.mtspr r0,r5,SPR_EPCR_BASE 374 l.sw PT_PC(r1),r5 375 376 l.sfeqi r4,0x26 377 l.bf lhs 378 l.sfeqi r4,0x25 379 l.bf lhz 380 l.sfeqi r4,0x22 381 l.bf lws 382 l.sfeqi r4,0x21 383 l.bf lwz 384 l.sfeqi r4,0x37 385 l.bf sh 386 l.sfeqi r4,0x35 387 l.bf sw 388 l.nop 389 3901: l.j 1b /* I don't know what to do */ 391 l.nop 392 393lhs: l.lbs r5,0(r2) 394 l.slli r5,r5,8 395 l.lbz r6,1(r2) 396 l.or r5,r5,r6 397 l.srli r4,r3,19 398 l.andi r4,r4,0x7c 399 l.add r4,r4,r1 400 l.j align_end 401 l.sw 0(r4),r5 402 403lhz: l.lbz r5,0(r2) 404 l.slli r5,r5,8 405 l.lbz r6,1(r2) 406 l.or r5,r5,r6 407 l.srli r4,r3,19 408 l.andi r4,r4,0x7c 409 l.add r4,r4,r1 410 l.j align_end 411 l.sw 0(r4),r5 412 413lws: l.lbs r5,0(r2) 414 l.slli r5,r5,24 415 l.lbz r6,1(r2) 416 l.slli r6,r6,16 417 l.or r5,r5,r6 418 l.lbz r6,2(r2) 419 l.slli r6,r6,8 420 l.or r5,r5,r6 421 l.lbz r6,3(r2) 422 l.or r5,r5,r6 423 l.srli r4,r3,19 424 l.andi r4,r4,0x7c 425 l.add r4,r4,r1 426 l.j align_end 427 l.sw 0(r4),r5 428 429lwz: l.lbz r5,0(r2) 430 l.slli r5,r5,24 431 l.lbz r6,1(r2) 432 l.slli r6,r6,16 433 l.or r5,r5,r6 434 l.lbz r6,2(r2) 435 l.slli r6,r6,8 436 l.or r5,r5,r6 437 l.lbz r6,3(r2) 438 l.or r5,r5,r6 439 l.srli r4,r3,19 440 l.andi r4,r4,0x7c 441 l.add r4,r4,r1 442 l.j align_end 443 l.sw 0(r4),r5 444 445sh: 446 l.srli r4,r3,9 447 l.andi r4,r4,0x7c 448 l.add r4,r4,r1 449 l.lwz r5,0(r4) 450 l.sb 1(r2),r5 451 l.srli r5,r5,8 452 l.j align_end 453 l.sb 0(r2),r5 454 455sw: 456 l.srli r4,r3,9 457 l.andi r4,r4,0x7c 458 l.add r4,r4,r1 459 l.lwz r5,0(r4) 460 l.sb 3(r2),r5 461 l.srli r5,r5,8 462 l.sb 2(r2),r5 463 l.srli r5,r5,8 464 l.sb 1(r2),r5 465 l.srli r5,r5,8 466 l.j align_end 467 l.sb 0(r2),r5 468 469align_end: 470 l.j _ret_from_intr 471 l.nop 472#endif 473 474/* ---[ 0x700: Illegal insn exception ]---------------------------------- */ 475 476EXCEPTION_ENTRY(_illegal_instruction_handler) 477 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 478 l.jal do_illegal_instruction 479 l.addi r3,r1,0 /* pt_regs */ 480 481 l.j _ret_from_exception 482 l.nop 483 484/* ---[ 0x800: External interrupt exception ]---------------------------- */ 485 486EXCEPTION_ENTRY(_external_irq_handler) 487#ifdef CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK 488 l.lwz r4,PT_SR(r1) // were interrupts enabled ? 489 l.andi r4,r4,SPR_SR_IEE 490 l.sfeqi r4,0 491 l.bnf 1f // ext irq enabled, all ok. 492 l.nop 493 494 l.addi r1,r1,-0x8 495 l.movhi r3,hi(42f) 496 l.ori r3,r3,lo(42f) 497 l.sw 0x0(r1),r3 498 l.jal printk 499 l.sw 0x4(r1),r4 500 l.addi r1,r1,0x8 501 502 .section .rodata, "a" 50342: 504 .string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r" 505 .align 4 506 .previous 507 508 l.ori r4,r4,SPR_SR_IEE // fix the bug 509// l.sw PT_SR(r1),r4 5101: 511#endif 512 l.addi r3,r1,0 513 l.movhi r8,hi(do_IRQ) 514 l.ori r8,r8,lo(do_IRQ) 515 l.jalr r8 516 l.nop 517 l.j _ret_from_intr 518 l.nop 519 520/* ---[ 0x900: DTLB miss exception ]------------------------------------- */ 521 522 523/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */ 524 525 526/* ---[ 0xb00: Range exception ]----------------------------------------- */ 527 528UNHANDLED_EXCEPTION(_vector_0xb00,0xb00) 529 530/* ---[ 0xc00: Syscall exception ]--------------------------------------- */ 531 532/* 533 * Syscalls are a special type of exception in that they are 534 * _explicitly_ invoked by userspace and can therefore be 535 * held to conform to the same ABI as normal functions with 536 * respect to whether registers are preserved across the call 537 * or not. 538 */ 539 540/* Upon syscall entry we just save the callee-saved registers 541 * and not the call-clobbered ones. 542 */ 543 544_string_syscall_return: 545 .string "syscall return %ld \n\r\0" 546 .align 4 547 548ENTRY(_sys_call_handler) 549 /* syscalls run with interrupts enabled */ 550 ENABLE_INTERRUPTS(r29) // enable interrupts, r29 is temp 551 552 /* r1, EPCR, ESR a already saved */ 553 l.sw PT_GPR2(r1),r2 554 /* r3-r8 must be saved because syscall restart relies 555 * on us being able to restart the syscall args... technically 556 * they should be clobbered, otherwise 557 */ 558 l.sw PT_GPR3(r1),r3 559 /* r4 already saved */ 560 /* r4 holds the EEAR address of the fault, load the original r4 */ 561 l.lwz r4,PT_GPR4(r1) 562 l.sw PT_GPR5(r1),r5 563 l.sw PT_GPR6(r1),r6 564 l.sw PT_GPR7(r1),r7 565 l.sw PT_GPR8(r1),r8 566 l.sw PT_GPR9(r1),r9 567 /* r10 already saved */ 568 l.sw PT_GPR11(r1),r11 569 /* orig_gpr11 must be set for syscalls */ 570 l.sw PT_ORIG_GPR11(r1),r11 571 /* r12,r13 already saved */ 572 573 /* r14-r28 (even) aren't touched by the syscall fast path below 574 * so we don't need to save them. However, the functions that return 575 * to userspace via a call to switch() DO need to save these because 576 * switch() effectively clobbers them... saving these registers for 577 * such functions is handled in their syscall wrappers (see fork, vfork, 578 * and clone, below). 579 580 /* r30 is the only register we clobber in the fast path */ 581 /* r30 already saved */ 582/* l.sw PT_GPR30(r1),r30 */ 583 584_syscall_check_trace_enter: 585 /* If TIF_SYSCALL_TRACE is set, then we want to do syscall tracing */ 586 l.lwz r30,TI_FLAGS(r10) 587 l.andi r30,r30,_TIF_SYSCALL_TRACE 588 l.sfne r30,r0 589 l.bf _syscall_trace_enter 590 l.nop 591 592_syscall_check: 593 /* Ensure that the syscall number is reasonable */ 594 l.sfgeui r11,__NR_syscalls 595 l.bf _syscall_badsys 596 l.nop 597 598_syscall_call: 599 l.movhi r29,hi(sys_call_table) 600 l.ori r29,r29,lo(sys_call_table) 601 l.slli r11,r11,2 602 l.add r29,r29,r11 603 l.lwz r29,0(r29) 604 605 l.jalr r29 606 l.nop 607 608_syscall_return: 609 /* All syscalls return here... just pay attention to ret_from_fork 610 * which does it in a round-about way. 611 */ 612 l.sw PT_GPR11(r1),r11 // save return value 613 614#if 0 615_syscall_debug: 616 l.movhi r3,hi(_string_syscall_return) 617 l.ori r3,r3,lo(_string_syscall_return) 618 l.ori r27,r0,1 619 l.sw -4(r1),r27 620 l.sw -8(r1),r11 621 l.addi r1,r1,-8 622 l.movhi r27,hi(printk) 623 l.ori r27,r27,lo(printk) 624 l.jalr r27 625 l.nop 626 l.addi r1,r1,8 627#endif 628 629_syscall_check_trace_leave: 630 /* r30 is a callee-saved register so this should still hold the 631 * _TIF_SYSCALL_TRACE flag from _syscall_check_trace_enter above... 632 * _syscall_trace_leave expects syscall result to be in pt_regs->r11. 633 */ 634 l.sfne r30,r0 635 l.bf _syscall_trace_leave 636 l.nop 637 638/* This is where the exception-return code begins... interrupts need to be 639 * disabled the rest of the way here because we can't afford to miss any 640 * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */ 641 642_syscall_check_work: 643 /* Here we need to disable interrupts */ 644 DISABLE_INTERRUPTS(r27,r29) 645 l.lwz r30,TI_FLAGS(r10) 646 l.andi r30,r30,_TIF_WORK_MASK 647 l.sfne r30,r0 648 649 l.bnf _syscall_resume_userspace 650 l.nop 651 652 /* Work pending follows a different return path, so we need to 653 * make sure that all the call-saved registers get into pt_regs 654 * before branching... 655 */ 656 l.sw PT_GPR14(r1),r14 657 l.sw PT_GPR16(r1),r16 658 l.sw PT_GPR18(r1),r18 659 l.sw PT_GPR20(r1),r20 660 l.sw PT_GPR22(r1),r22 661 l.sw PT_GPR24(r1),r24 662 l.sw PT_GPR26(r1),r26 663 l.sw PT_GPR28(r1),r28 664 665 /* _work_pending needs to be called with interrupts disabled */ 666 l.j _work_pending 667 l.nop 668 669_syscall_resume_userspace: 670// ENABLE_INTERRUPTS(r29) 671 672 673/* This is the hot path for returning to userspace from a syscall. If there's 674 * work to be done and the branch to _work_pending was taken above, then the 675 * return to userspace will be done via the normal exception return path... 676 * that path restores _all_ registers and will overwrite the "clobbered" 677 * registers with whatever garbage is in pt_regs -- that's OK because those 678 * registers are clobbered anyway and because the extra work is insignificant 679 * in the context of the extra work that _work_pending is doing. 680 681/* Once again, syscalls are special and only guarantee to preserve the 682 * same registers as a normal function call */ 683 684/* The assumption here is that the registers r14-r28 (even) are untouched and 685 * don't need to be restored... be sure that that's really the case! 686 */ 687 688/* This is still too much... we should only be restoring what we actually 689 * clobbered... we should even be using 'scratch' (odd) regs above so that 690 * we don't need to restore anything, hardly... 691 */ 692 693 l.lwz r2,PT_GPR2(r1) 694 695 /* Restore args */ 696 /* r3-r8 are technically clobbered, but syscall restart needs these 697 * to be restored... 698 */ 699 l.lwz r3,PT_GPR3(r1) 700 l.lwz r4,PT_GPR4(r1) 701 l.lwz r5,PT_GPR5(r1) 702 l.lwz r6,PT_GPR6(r1) 703 l.lwz r7,PT_GPR7(r1) 704 l.lwz r8,PT_GPR8(r1) 705 706 l.lwz r9,PT_GPR9(r1) 707 l.lwz r10,PT_GPR10(r1) 708 l.lwz r11,PT_GPR11(r1) 709 710 /* r30 is the only register we clobber in the fast path */ 711 l.lwz r30,PT_GPR30(r1) 712 713 /* Here we use r13-r19 (odd) as scratch regs */ 714 l.lwz r13,PT_PC(r1) 715 l.lwz r15,PT_SR(r1) 716 l.lwz r1,PT_SP(r1) 717 /* Interrupts need to be disabled for setting EPCR and ESR 718 * so that another interrupt doesn't come in here and clobber 719 * them before we can use them for our l.rfe */ 720 DISABLE_INTERRUPTS(r17,r19) 721 l.mtspr r0,r13,SPR_EPCR_BASE 722 l.mtspr r0,r15,SPR_ESR_BASE 723 l.rfe 724 725/* End of hot path! 726 * Keep the below tracing and error handling out of the hot path... 727*/ 728 729_syscall_trace_enter: 730 /* Here we pass pt_regs to do_syscall_trace_enter. Make sure 731 * that function is really getting all the info it needs as 732 * pt_regs isn't a complete set of userspace regs, just the 733 * ones relevant to the syscall... 734 * 735 * Note use of delay slot for setting argument. 736 */ 737 l.jal do_syscall_trace_enter 738 l.addi r3,r1,0 739 740 /* Restore arguments (not preserved across do_syscall_trace_enter) 741 * so that we can do the syscall for real and return to the syscall 742 * hot path. 743 */ 744 l.lwz r11,PT_GPR11(r1) 745 l.lwz r3,PT_GPR3(r1) 746 l.lwz r4,PT_GPR4(r1) 747 l.lwz r5,PT_GPR5(r1) 748 l.lwz r6,PT_GPR6(r1) 749 l.lwz r7,PT_GPR7(r1) 750 751 l.j _syscall_check 752 l.lwz r8,PT_GPR8(r1) 753 754_syscall_trace_leave: 755 l.jal do_syscall_trace_leave 756 l.addi r3,r1,0 757 758 l.j _syscall_check_work 759 l.nop 760 761_syscall_badsys: 762 /* Here we effectively pretend to have executed an imaginary 763 * syscall that returns -ENOSYS and then return to the regular 764 * syscall hot path. 765 * Note that "return value" is set in the delay slot... 766 */ 767 l.j _syscall_return 768 l.addi r11,r0,-ENOSYS 769 770/******* END SYSCALL HANDLING *******/ 771 772/* ---[ 0xd00: Trap exception ]------------------------------------------ */ 773 774UNHANDLED_EXCEPTION(_vector_0xd00,0xd00) 775 776/* ---[ 0xe00: Trap exception ]------------------------------------------ */ 777 778EXCEPTION_ENTRY(_trap_handler) 779 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 780 l.jal do_trap 781 l.addi r3,r1,0 /* pt_regs */ 782 783 l.j _ret_from_exception 784 l.nop 785 786/* ---[ 0xf00: Reserved exception ]-------------------------------------- */ 787 788UNHANDLED_EXCEPTION(_vector_0xf00,0xf00) 789 790/* ---[ 0x1000: Reserved exception ]------------------------------------- */ 791 792UNHANDLED_EXCEPTION(_vector_0x1000,0x1000) 793 794/* ---[ 0x1100: Reserved exception ]------------------------------------- */ 795 796UNHANDLED_EXCEPTION(_vector_0x1100,0x1100) 797 798/* ---[ 0x1200: Reserved exception ]------------------------------------- */ 799 800UNHANDLED_EXCEPTION(_vector_0x1200,0x1200) 801 802/* ---[ 0x1300: Reserved exception ]------------------------------------- */ 803 804UNHANDLED_EXCEPTION(_vector_0x1300,0x1300) 805 806/* ---[ 0x1400: Reserved exception ]------------------------------------- */ 807 808UNHANDLED_EXCEPTION(_vector_0x1400,0x1400) 809 810/* ---[ 0x1500: Reserved exception ]------------------------------------- */ 811 812UNHANDLED_EXCEPTION(_vector_0x1500,0x1500) 813 814/* ---[ 0x1600: Reserved exception ]------------------------------------- */ 815 816UNHANDLED_EXCEPTION(_vector_0x1600,0x1600) 817 818/* ---[ 0x1700: Reserved exception ]------------------------------------- */ 819 820UNHANDLED_EXCEPTION(_vector_0x1700,0x1700) 821 822/* ---[ 0x1800: Reserved exception ]------------------------------------- */ 823 824UNHANDLED_EXCEPTION(_vector_0x1800,0x1800) 825 826/* ---[ 0x1900: Reserved exception ]------------------------------------- */ 827 828UNHANDLED_EXCEPTION(_vector_0x1900,0x1900) 829 830/* ---[ 0x1a00: Reserved exception ]------------------------------------- */ 831 832UNHANDLED_EXCEPTION(_vector_0x1a00,0x1a00) 833 834/* ---[ 0x1b00: Reserved exception ]------------------------------------- */ 835 836UNHANDLED_EXCEPTION(_vector_0x1b00,0x1b00) 837 838/* ---[ 0x1c00: Reserved exception ]------------------------------------- */ 839 840UNHANDLED_EXCEPTION(_vector_0x1c00,0x1c00) 841 842/* ---[ 0x1d00: Reserved exception ]------------------------------------- */ 843 844UNHANDLED_EXCEPTION(_vector_0x1d00,0x1d00) 845 846/* ---[ 0x1e00: Reserved exception ]------------------------------------- */ 847 848UNHANDLED_EXCEPTION(_vector_0x1e00,0x1e00) 849 850/* ---[ 0x1f00: Reserved exception ]------------------------------------- */ 851 852UNHANDLED_EXCEPTION(_vector_0x1f00,0x1f00) 853 854/* ========================================================[ return ] === */ 855 856_resume_userspace: 857 DISABLE_INTERRUPTS(r3,r4) 858 l.lwz r4,TI_FLAGS(r10) 859 l.andi r13,r4,_TIF_WORK_MASK 860 l.sfeqi r13,0 861 l.bf _restore_all 862 l.nop 863 864_work_pending: 865 l.lwz r5,PT_ORIG_GPR11(r1) 866 l.sfltsi r5,0 867 l.bnf 1f 868 l.nop 869 l.andi r5,r5,0 8701: 871 l.jal do_work_pending 872 l.ori r3,r1,0 /* pt_regs */ 873 874 l.sfeqi r11,0 875 l.bf _restore_all 876 l.nop 877 l.sfltsi r11,0 878 l.bnf 1f 879 l.nop 880 l.and r11,r11,r0 881 l.ori r11,r11,__NR_restart_syscall 882 l.j _syscall_check_trace_enter 883 l.nop 8841: 885 l.lwz r11,PT_ORIG_GPR11(r1) 886 /* Restore arg registers */ 887 l.lwz r3,PT_GPR3(r1) 888 l.lwz r4,PT_GPR4(r1) 889 l.lwz r5,PT_GPR5(r1) 890 l.lwz r6,PT_GPR6(r1) 891 l.lwz r7,PT_GPR7(r1) 892 l.j _syscall_check_trace_enter 893 l.lwz r8,PT_GPR8(r1) 894 895_restore_all: 896 RESTORE_ALL 897 /* This returns to userspace code */ 898 899 900ENTRY(_ret_from_intr) 901ENTRY(_ret_from_exception) 902 l.lwz r4,PT_SR(r1) 903 l.andi r3,r4,SPR_SR_SM 904 l.sfeqi r3,0 905 l.bnf _restore_all 906 l.nop 907 l.j _resume_userspace 908 l.nop 909 910ENTRY(ret_from_fork) 911 l.jal schedule_tail 912 l.nop 913 914 /* Check if we are a kernel thread */ 915 l.sfeqi r20,0 916 l.bf 1f 917 l.nop 918 919 /* ...we are a kernel thread so invoke the requested callback */ 920 l.jalr r20 921 l.or r3,r22,r0 922 9231: 924 /* _syscall_returns expect r11 to contain return value */ 925 l.lwz r11,PT_GPR11(r1) 926 927 /* The syscall fast path return expects call-saved registers 928 * r12-r28 to be untouched, so we restore them here as they 929 * will have been effectively clobbered when arriving here 930 * via the call to switch() 931 */ 932 l.lwz r12,PT_GPR12(r1) 933 l.lwz r14,PT_GPR14(r1) 934 l.lwz r16,PT_GPR16(r1) 935 l.lwz r18,PT_GPR18(r1) 936 l.lwz r20,PT_GPR20(r1) 937 l.lwz r22,PT_GPR22(r1) 938 l.lwz r24,PT_GPR24(r1) 939 l.lwz r26,PT_GPR26(r1) 940 l.lwz r28,PT_GPR28(r1) 941 942 l.j _syscall_return 943 l.nop 944 945/* ========================================================[ switch ] === */ 946 947/* 948 * This routine switches between two different tasks. The process 949 * state of one is saved on its kernel stack. Then the state 950 * of the other is restored from its kernel stack. The memory 951 * management hardware is updated to the second process's state. 952 * Finally, we can return to the second process, via the 'return'. 953 * 954 * Note: there are two ways to get to the "going out" portion 955 * of this code; either by coming in via the entry (_switch) 956 * or via "fork" which must set up an environment equivalent 957 * to the "_switch" path. If you change this (or in particular, the 958 * SAVE_REGS macro), you'll have to change the fork code also. 959 */ 960 961 962/* _switch MUST never lay on page boundry, cause it runs from 963 * effective addresses and beeing interrupted by iTLB miss would kill it. 964 * dTLB miss seams to never accour in the bad place since data accesses 965 * are from task structures which are always page aligned. 966 * 967 * The problem happens in RESTORE_ALL_NO_R11 where we first set the EPCR 968 * register, then load the previous register values and only at the end call 969 * the l.rfe instruction. If get TLB miss in beetwen the EPCR register gets 970 * garbled and we end up calling l.rfe with the wrong EPCR. (same probably 971 * holds for ESR) 972 * 973 * To avoid this problems it is sufficient to align _switch to 974 * some nice round number smaller than it's size... 975 */ 976 977/* ABI rules apply here... we either enter _switch via schedule() or via 978 * an imaginary call to which we shall return at return_from_fork. Either 979 * way, we are a function call and only need to preserve the callee-saved 980 * registers when we return. As such, we don't need to save the registers 981 * on the stack that we won't be returning as they were... 982 */ 983 984 .align 0x400 985ENTRY(_switch) 986 /* We don't store SR as _switch only gets called in a context where 987 * the SR will be the same going in and coming out... */ 988 989 /* Set up new pt_regs struct for saving task state */ 990 l.addi r1,r1,-(INT_FRAME_SIZE) 991 992 /* No need to store r1/PT_SP as it goes into KSP below */ 993 l.sw PT_GPR2(r1),r2 994 l.sw PT_GPR9(r1),r9 995 /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being 996 * and expects r12 to be callee-saved... */ 997 l.sw PT_GPR12(r1),r12 998 l.sw PT_GPR14(r1),r14 999 l.sw PT_GPR16(r1),r16 1000 l.sw PT_GPR18(r1),r18 1001 l.sw PT_GPR20(r1),r20 1002 l.sw PT_GPR22(r1),r22 1003 l.sw PT_GPR24(r1),r24 1004 l.sw PT_GPR26(r1),r26 1005 l.sw PT_GPR28(r1),r28 1006 l.sw PT_GPR30(r1),r30 1007 1008 l.addi r11,r10,0 /* Save old 'current' to 'last' return value*/ 1009 1010 /* We use thread_info->ksp for storing the address of the above 1011 * structure so that we can get back to it later... we don't want 1012 * to lose the value of thread_info->ksp, though, so store it as 1013 * pt_regs->sp so that we can easily restore it when we are made 1014 * live again... 1015 */ 1016 1017 /* Save the old value of thread_info->ksp as pt_regs->sp */ 1018 l.lwz r29,TI_KSP(r10) 1019 l.sw PT_SP(r1),r29 1020 1021 /* Swap kernel stack pointers */ 1022 l.sw TI_KSP(r10),r1 /* Save old stack pointer */ 1023 l.or r10,r4,r0 /* Set up new current_thread_info */ 1024 l.lwz r1,TI_KSP(r10) /* Load new stack pointer */ 1025 1026 /* Restore the old value of thread_info->ksp */ 1027 l.lwz r29,PT_SP(r1) 1028 l.sw TI_KSP(r10),r29 1029 1030 /* ...and restore the registers, except r11 because the return value 1031 * has already been set above. 1032 */ 1033 l.lwz r2,PT_GPR2(r1) 1034 l.lwz r9,PT_GPR9(r1) 1035 /* No need to restore r10 */ 1036 /* ...and do not restore r11 */ 1037 1038 /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being 1039 * and expects r12 to be callee-saved... */ 1040 l.lwz r12,PT_GPR12(r1) 1041 l.lwz r14,PT_GPR14(r1) 1042 l.lwz r16,PT_GPR16(r1) 1043 l.lwz r18,PT_GPR18(r1) 1044 l.lwz r20,PT_GPR20(r1) 1045 l.lwz r22,PT_GPR22(r1) 1046 l.lwz r24,PT_GPR24(r1) 1047 l.lwz r26,PT_GPR26(r1) 1048 l.lwz r28,PT_GPR28(r1) 1049 l.lwz r30,PT_GPR30(r1) 1050 1051 /* Unwind stack to pre-switch state */ 1052 l.addi r1,r1,(INT_FRAME_SIZE) 1053 1054 /* Return via the link-register back to where we 'came from', where 1055 * that may be either schedule(), ret_from_fork(), or 1056 * ret_from_kernel_thread(). If we are returning to a new thread, 1057 * we are expected to have set up the arg to schedule_tail already, 1058 * hence we do so here unconditionally: 1059 */ 1060 l.lwz r3,TI_TASK(r3) /* Load 'prev' as schedule_tail arg */ 1061 l.jr r9 1062 l.nop 1063 1064/* ==================================================================== */ 1065 1066/* These all use the delay slot for setting the argument register, so the 1067 * jump is always happening after the l.addi instruction. 1068 * 1069 * These are all just wrappers that don't touch the link-register r9, so the 1070 * return from the "real" syscall function will return back to the syscall 1071 * code that did the l.jal that brought us here. 1072 */ 1073 1074/* fork requires that we save all the callee-saved registers because they 1075 * are all effectively clobbered by the call to _switch. Here we store 1076 * all the registers that aren't touched by the syscall fast path and thus 1077 * weren't saved there. 1078 */ 1079 1080_fork_save_extra_regs_and_call: 1081 l.sw PT_GPR14(r1),r14 1082 l.sw PT_GPR16(r1),r16 1083 l.sw PT_GPR18(r1),r18 1084 l.sw PT_GPR20(r1),r20 1085 l.sw PT_GPR22(r1),r22 1086 l.sw PT_GPR24(r1),r24 1087 l.sw PT_GPR26(r1),r26 1088 l.jr r29 1089 l.sw PT_GPR28(r1),r28 1090 1091ENTRY(__sys_clone) 1092 l.movhi r29,hi(sys_clone) 1093 l.ori r29,r29,lo(sys_clone) 1094 l.j _fork_save_extra_regs_and_call 1095 l.addi r7,r1,0 1096 1097ENTRY(__sys_fork) 1098 l.movhi r29,hi(sys_fork) 1099 l.ori r29,r29,lo(sys_fork) 1100 l.j _fork_save_extra_regs_and_call 1101 l.addi r3,r1,0 1102 1103ENTRY(sys_rt_sigreturn) 1104 l.jal _sys_rt_sigreturn 1105 l.addi r3,r1,0 1106 l.sfne r30,r0 1107 l.bnf _no_syscall_trace 1108 l.nop 1109 l.jal do_syscall_trace_leave 1110 l.addi r3,r1,0 1111_no_syscall_trace: 1112 l.j _resume_userspace 1113 l.nop 1114 1115/* This is a catch-all syscall for atomic instructions for the OpenRISC 1000. 1116 * The functions takes a variable number of parameters depending on which 1117 * particular flavour of atomic you want... parameter 1 is a flag identifying 1118 * the atomic in question. Currently, this function implements the 1119 * following variants: 1120 * 1121 * XCHG: 1122 * @flag: 1 1123 * @ptr1: 1124 * @ptr2: 1125 * Atomically exchange the values in pointers 1 and 2. 1126 * 1127 */ 1128 1129ENTRY(sys_or1k_atomic) 1130 /* FIXME: This ignores r3 and always does an XCHG */ 1131 DISABLE_INTERRUPTS(r17,r19) 1132 l.lwz r29,0(r4) 1133 l.lwz r27,0(r5) 1134 l.sw 0(r4),r27 1135 l.sw 0(r5),r29 1136 ENABLE_INTERRUPTS(r17) 1137 l.jr r9 1138 l.or r11,r0,r0 1139 1140/* ============================================================[ EOF ]=== */ 1141