1/* 2 * OpenRISC entry.S 3 * 4 * Linux architectural port borrowing liberally from similar works of 5 * others. All original copyrights apply as per the original source 6 * declaration. 7 * 8 * Modifications for the OpenRISC architecture: 9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com> 10 * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com> 11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se> 12 * 13 * This program is free software; you can redistribute it and/or 14 * modify it under the terms of the GNU General Public License 15 * as published by the Free Software Foundation; either version 16 * 2 of the License, or (at your option) any later version. 17 */ 18 19#include <linux/linkage.h> 20 21#include <asm/processor.h> 22#include <asm/unistd.h> 23#include <asm/thread_info.h> 24#include <asm/errno.h> 25#include <asm/spr_defs.h> 26#include <asm/page.h> 27#include <asm/mmu.h> 28#include <asm/pgtable.h> 29#include <asm/asm-offsets.h> 30 31#define DISABLE_INTERRUPTS(t1,t2) \ 32 l.mfspr t2,r0,SPR_SR ;\ 33 l.movhi t1,hi(~(SPR_SR_IEE|SPR_SR_TEE)) ;\ 34 l.ori t1,t1,lo(~(SPR_SR_IEE|SPR_SR_TEE)) ;\ 35 l.and t2,t2,t1 ;\ 36 l.mtspr r0,t2,SPR_SR 37 38#define ENABLE_INTERRUPTS(t1) \ 39 l.mfspr t1,r0,SPR_SR ;\ 40 l.ori t1,t1,lo(SPR_SR_IEE|SPR_SR_TEE) ;\ 41 l.mtspr r0,t1,SPR_SR 42 43/* =========================================================[ macros ]=== */ 44 45/* 46 * We need to disable interrupts at beginning of RESTORE_ALL 47 * since interrupt might come in after we've loaded EPC return address 48 * and overwrite EPC with address somewhere in RESTORE_ALL 49 * which is of course wrong! 50 */ 51 52#define RESTORE_ALL \ 53 DISABLE_INTERRUPTS(r3,r4) ;\ 54 l.lwz r3,PT_PC(r1) ;\ 55 l.mtspr r0,r3,SPR_EPCR_BASE ;\ 56 l.lwz r3,PT_SR(r1) ;\ 57 l.mtspr r0,r3,SPR_ESR_BASE ;\ 58 l.lwz r2,PT_GPR2(r1) ;\ 59 l.lwz r3,PT_GPR3(r1) ;\ 60 l.lwz r4,PT_GPR4(r1) ;\ 61 l.lwz r5,PT_GPR5(r1) ;\ 62 l.lwz r6,PT_GPR6(r1) ;\ 63 l.lwz r7,PT_GPR7(r1) ;\ 64 l.lwz r8,PT_GPR8(r1) ;\ 65 l.lwz r9,PT_GPR9(r1) ;\ 66 l.lwz r10,PT_GPR10(r1) ;\ 67 l.lwz r11,PT_GPR11(r1) ;\ 68 l.lwz r12,PT_GPR12(r1) ;\ 69 l.lwz r13,PT_GPR13(r1) ;\ 70 l.lwz r14,PT_GPR14(r1) ;\ 71 l.lwz r15,PT_GPR15(r1) ;\ 72 l.lwz r16,PT_GPR16(r1) ;\ 73 l.lwz r17,PT_GPR17(r1) ;\ 74 l.lwz r18,PT_GPR18(r1) ;\ 75 l.lwz r19,PT_GPR19(r1) ;\ 76 l.lwz r20,PT_GPR20(r1) ;\ 77 l.lwz r21,PT_GPR21(r1) ;\ 78 l.lwz r22,PT_GPR22(r1) ;\ 79 l.lwz r23,PT_GPR23(r1) ;\ 80 l.lwz r24,PT_GPR24(r1) ;\ 81 l.lwz r25,PT_GPR25(r1) ;\ 82 l.lwz r26,PT_GPR26(r1) ;\ 83 l.lwz r27,PT_GPR27(r1) ;\ 84 l.lwz r28,PT_GPR28(r1) ;\ 85 l.lwz r29,PT_GPR29(r1) ;\ 86 l.lwz r30,PT_GPR30(r1) ;\ 87 l.lwz r31,PT_GPR31(r1) ;\ 88 l.lwz r1,PT_SP(r1) ;\ 89 l.rfe 90 91 92#define EXCEPTION_ENTRY(handler) \ 93 .global handler ;\ 94handler: ;\ 95 /* r1, EPCR, ESR a already saved */ ;\ 96 l.sw PT_GPR2(r1),r2 ;\ 97 l.sw PT_GPR3(r1),r3 ;\ 98 l.sw PT_ORIG_GPR11(r1),r11 ;\ 99 /* r4 already save */ ;\ 100 l.sw PT_GPR5(r1),r5 ;\ 101 l.sw PT_GPR6(r1),r6 ;\ 102 l.sw PT_GPR7(r1),r7 ;\ 103 l.sw PT_GPR8(r1),r8 ;\ 104 l.sw PT_GPR9(r1),r9 ;\ 105 /* r10 already saved */ ;\ 106 l.sw PT_GPR11(r1),r11 ;\ 107 /* r12 already saved */ ;\ 108 l.sw PT_GPR13(r1),r13 ;\ 109 l.sw PT_GPR14(r1),r14 ;\ 110 l.sw PT_GPR15(r1),r15 ;\ 111 l.sw PT_GPR16(r1),r16 ;\ 112 l.sw PT_GPR17(r1),r17 ;\ 113 l.sw PT_GPR18(r1),r18 ;\ 114 l.sw PT_GPR19(r1),r19 ;\ 115 l.sw PT_GPR20(r1),r20 ;\ 116 l.sw PT_GPR21(r1),r21 ;\ 117 l.sw PT_GPR22(r1),r22 ;\ 118 l.sw PT_GPR23(r1),r23 ;\ 119 l.sw PT_GPR24(r1),r24 ;\ 120 l.sw PT_GPR25(r1),r25 ;\ 121 l.sw PT_GPR26(r1),r26 ;\ 122 l.sw PT_GPR27(r1),r27 ;\ 123 l.sw PT_GPR28(r1),r28 ;\ 124 l.sw PT_GPR29(r1),r29 ;\ 125 /* r30 already save */ ;\ 126/* l.sw PT_GPR30(r1),r30*/ ;\ 127 l.sw PT_GPR31(r1),r31 ;\ 128 l.sw PT_SYSCALLNO(r1),r0 129 130#define UNHANDLED_EXCEPTION(handler,vector) \ 131 .global handler ;\ 132handler: ;\ 133 /* r1, EPCR, ESR already saved */ ;\ 134 l.sw PT_GPR2(r1),r2 ;\ 135 l.sw PT_GPR3(r1),r3 ;\ 136 l.sw PT_ORIG_GPR11(r1),r11 ;\ 137 l.sw PT_GPR5(r1),r5 ;\ 138 l.sw PT_GPR6(r1),r6 ;\ 139 l.sw PT_GPR7(r1),r7 ;\ 140 l.sw PT_GPR8(r1),r8 ;\ 141 l.sw PT_GPR9(r1),r9 ;\ 142 /* r10 already saved */ ;\ 143 l.sw PT_GPR11(r1),r11 ;\ 144 /* r12 already saved */ ;\ 145 l.sw PT_GPR13(r1),r13 ;\ 146 l.sw PT_GPR14(r1),r14 ;\ 147 l.sw PT_GPR15(r1),r15 ;\ 148 l.sw PT_GPR16(r1),r16 ;\ 149 l.sw PT_GPR17(r1),r17 ;\ 150 l.sw PT_GPR18(r1),r18 ;\ 151 l.sw PT_GPR19(r1),r19 ;\ 152 l.sw PT_GPR20(r1),r20 ;\ 153 l.sw PT_GPR21(r1),r21 ;\ 154 l.sw PT_GPR22(r1),r22 ;\ 155 l.sw PT_GPR23(r1),r23 ;\ 156 l.sw PT_GPR24(r1),r24 ;\ 157 l.sw PT_GPR25(r1),r25 ;\ 158 l.sw PT_GPR26(r1),r26 ;\ 159 l.sw PT_GPR27(r1),r27 ;\ 160 l.sw PT_GPR28(r1),r28 ;\ 161 l.sw PT_GPR29(r1),r29 ;\ 162 /* r31 already saved */ ;\ 163 l.sw PT_GPR30(r1),r30 ;\ 164/* l.sw PT_GPR31(r1),r31 */ ;\ 165 l.sw PT_SYSCALLNO(r1),r0 ;\ 166 l.addi r3,r1,0 ;\ 167 /* r4 is exception EA */ ;\ 168 l.addi r5,r0,vector ;\ 169 l.jal unhandled_exception ;\ 170 l.nop ;\ 171 l.j _ret_from_exception ;\ 172 l.nop 173 174/* 175 * NOTE: one should never assume that SPR_EPC, SPR_ESR, SPR_EEAR 176 * contain the same values as when exception we're handling 177 * occured. in fact they never do. if you need them use 178 * values saved on stack (for SPR_EPC, SPR_ESR) or content 179 * of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE() 180 * in 'arch/or32/kernel/head.S' 181 */ 182 183/* =====================================================[ exceptions] === */ 184 185/* ---[ 0x100: RESET exception ]----------------------------------------- */ 186 187EXCEPTION_ENTRY(_tng_kernel_start) 188 l.jal _start 189 l.andi r0,r0,0 190 191/* ---[ 0x200: BUS exception ]------------------------------------------- */ 192 193EXCEPTION_ENTRY(_bus_fault_handler) 194 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 195 l.jal do_bus_fault 196 l.addi r3,r1,0 /* pt_regs */ 197 198 l.j _ret_from_exception 199 l.nop 200 201/* ---[ 0x300: Data Page Fault exception ]------------------------------- */ 202 203EXCEPTION_ENTRY(_data_page_fault_handler) 204 /* set up parameters for do_page_fault */ 205 l.addi r3,r1,0 // pt_regs 206 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault 207 l.ori r5,r0,0x300 // exception vector 208 209 /* 210 * __PHX__: TODO 211 * 212 * all this can be written much simpler. look at 213 * DTLB miss handler in the CONFIG_GUARD_PROTECTED_CORE part 214 */ 215#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX 216 l.lwz r6,PT_PC(r3) // address of an offending insn 217 l.lwz r6,0(r6) // instruction that caused pf 218 219 l.srli r6,r6,26 // check opcode for jump insn 220 l.sfeqi r6,0 // l.j 221 l.bf 8f 222 l.sfeqi r6,1 // l.jal 223 l.bf 8f 224 l.sfeqi r6,3 // l.bnf 225 l.bf 8f 226 l.sfeqi r6,4 // l.bf 227 l.bf 8f 228 l.sfeqi r6,0x11 // l.jr 229 l.bf 8f 230 l.sfeqi r6,0x12 // l.jalr 231 l.bf 8f 232 233 l.nop 234 235 l.j 9f 236 l.nop 2378: 238 239 l.lwz r6,PT_PC(r3) // address of an offending insn 240 l.addi r6,r6,4 241 l.lwz r6,0(r6) // instruction that caused pf 242 l.srli r6,r6,26 // get opcode 2439: 244 245#else 246 247 l.mfspr r6,r0,SPR_SR // SR 248// l.lwz r6,PT_SR(r3) // ESR 249 l.andi r6,r6,SPR_SR_DSX // check for delay slot exception 250 l.sfeqi r6,0x1 // exception happened in delay slot 251 l.bnf 7f 252 l.lwz r6,PT_PC(r3) // address of an offending insn 253 254 l.addi r6,r6,4 // offending insn is in delay slot 2557: 256 l.lwz r6,0(r6) // instruction that caused pf 257 l.srli r6,r6,26 // check opcode for write access 258#endif 259 260 l.sfgeui r6,0x34 // check opcode for write access 261 l.bnf 1f 262 l.sfleui r6,0x37 263 l.bnf 1f 264 l.ori r6,r0,0x1 // write access 265 l.j 2f 266 l.nop 2671: l.ori r6,r0,0x0 // !write access 2682: 269 270 /* call fault.c handler in or32/mm/fault.c */ 271 l.jal do_page_fault 272 l.nop 273 l.j _ret_from_exception 274 l.nop 275 276/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */ 277 278EXCEPTION_ENTRY(_insn_page_fault_handler) 279 /* set up parameters for do_page_fault */ 280 l.addi r3,r1,0 // pt_regs 281 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault 282 l.ori r5,r0,0x400 // exception vector 283 l.ori r6,r0,0x0 // !write access 284 285 /* call fault.c handler in or32/mm/fault.c */ 286 l.jal do_page_fault 287 l.nop 288 l.j _ret_from_exception 289 l.nop 290 291 292/* ---[ 0x500: Timer exception ]----------------------------------------- */ 293 294EXCEPTION_ENTRY(_timer_handler) 295 l.jal timer_interrupt 296 l.addi r3,r1,0 /* pt_regs */ 297 298 l.j _ret_from_intr 299 l.nop 300 301/* ---[ 0x600: Aligment exception ]-------------------------------------- */ 302 303EXCEPTION_ENTRY(_alignment_handler) 304 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 305 l.jal do_unaligned_access 306 l.addi r3,r1,0 /* pt_regs */ 307 308 l.j _ret_from_exception 309 l.nop 310 311#if 0 312EXCEPTION_ENTRY(_aligment_handler) 313// l.mfspr r2,r0,SPR_EEAR_BASE /* Load the efective addres */ 314 l.addi r2,r4,0 315// l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */ 316 l.lwz r5,PT_PC(r1) 317 318 l.lwz r3,0(r5) /* Load insn */ 319 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 320 321 l.sfeqi r4,0x00 /* Check if the load/store insn is in delay slot */ 322 l.bf jmp 323 l.sfeqi r4,0x01 324 l.bf jmp 325 l.sfeqi r4,0x03 326 l.bf jmp 327 l.sfeqi r4,0x04 328 l.bf jmp 329 l.sfeqi r4,0x11 330 l.bf jr 331 l.sfeqi r4,0x12 332 l.bf jr 333 l.nop 334 l.j 1f 335 l.addi r5,r5,4 /* Increment PC to get return insn address */ 336 337jmp: 338 l.slli r4,r3,6 /* Get the signed extended jump length */ 339 l.srai r4,r4,4 340 341 l.lwz r3,4(r5) /* Load the real load/store insn */ 342 343 l.add r5,r5,r4 /* Calculate jump target address */ 344 345 l.j 1f 346 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 347 348jr: 349 l.slli r4,r3,9 /* Shift to get the reg nb */ 350 l.andi r4,r4,0x7c 351 352 l.lwz r3,4(r5) /* Load the real load/store insn */ 353 354 l.add r4,r4,r1 /* Load the jump register value from the stack */ 355 l.lwz r5,0(r4) 356 357 l.srli r4,r3,26 /* Shift left to get the insn opcode */ 358 359 3601: 361// l.mtspr r0,r5,SPR_EPCR_BASE 362 l.sw PT_PC(r1),r5 363 364 l.sfeqi r4,0x26 365 l.bf lhs 366 l.sfeqi r4,0x25 367 l.bf lhz 368 l.sfeqi r4,0x22 369 l.bf lws 370 l.sfeqi r4,0x21 371 l.bf lwz 372 l.sfeqi r4,0x37 373 l.bf sh 374 l.sfeqi r4,0x35 375 l.bf sw 376 l.nop 377 3781: l.j 1b /* I don't know what to do */ 379 l.nop 380 381lhs: l.lbs r5,0(r2) 382 l.slli r5,r5,8 383 l.lbz r6,1(r2) 384 l.or r5,r5,r6 385 l.srli r4,r3,19 386 l.andi r4,r4,0x7c 387 l.add r4,r4,r1 388 l.j align_end 389 l.sw 0(r4),r5 390 391lhz: l.lbz r5,0(r2) 392 l.slli r5,r5,8 393 l.lbz r6,1(r2) 394 l.or r5,r5,r6 395 l.srli r4,r3,19 396 l.andi r4,r4,0x7c 397 l.add r4,r4,r1 398 l.j align_end 399 l.sw 0(r4),r5 400 401lws: l.lbs r5,0(r2) 402 l.slli r5,r5,24 403 l.lbz r6,1(r2) 404 l.slli r6,r6,16 405 l.or r5,r5,r6 406 l.lbz r6,2(r2) 407 l.slli r6,r6,8 408 l.or r5,r5,r6 409 l.lbz r6,3(r2) 410 l.or r5,r5,r6 411 l.srli r4,r3,19 412 l.andi r4,r4,0x7c 413 l.add r4,r4,r1 414 l.j align_end 415 l.sw 0(r4),r5 416 417lwz: l.lbz r5,0(r2) 418 l.slli r5,r5,24 419 l.lbz r6,1(r2) 420 l.slli r6,r6,16 421 l.or r5,r5,r6 422 l.lbz r6,2(r2) 423 l.slli r6,r6,8 424 l.or r5,r5,r6 425 l.lbz r6,3(r2) 426 l.or r5,r5,r6 427 l.srli r4,r3,19 428 l.andi r4,r4,0x7c 429 l.add r4,r4,r1 430 l.j align_end 431 l.sw 0(r4),r5 432 433sh: 434 l.srli r4,r3,9 435 l.andi r4,r4,0x7c 436 l.add r4,r4,r1 437 l.lwz r5,0(r4) 438 l.sb 1(r2),r5 439 l.srli r5,r5,8 440 l.j align_end 441 l.sb 0(r2),r5 442 443sw: 444 l.srli r4,r3,9 445 l.andi r4,r4,0x7c 446 l.add r4,r4,r1 447 l.lwz r5,0(r4) 448 l.sb 3(r2),r5 449 l.srli r5,r5,8 450 l.sb 2(r2),r5 451 l.srli r5,r5,8 452 l.sb 1(r2),r5 453 l.srli r5,r5,8 454 l.j align_end 455 l.sb 0(r2),r5 456 457align_end: 458 l.j _ret_from_intr 459 l.nop 460#endif 461 462/* ---[ 0x700: Illegal insn exception ]---------------------------------- */ 463 464EXCEPTION_ENTRY(_illegal_instruction_handler) 465 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 466 l.jal do_illegal_instruction 467 l.addi r3,r1,0 /* pt_regs */ 468 469 l.j _ret_from_exception 470 l.nop 471 472/* ---[ 0x800: External interrupt exception ]---------------------------- */ 473 474EXCEPTION_ENTRY(_external_irq_handler) 475#ifdef CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK 476 l.lwz r4,PT_SR(r1) // were interrupts enabled ? 477 l.andi r4,r4,SPR_SR_IEE 478 l.sfeqi r4,0 479 l.bnf 1f // ext irq enabled, all ok. 480 l.nop 481 482 l.addi r1,r1,-0x8 483 l.movhi r3,hi(42f) 484 l.ori r3,r3,lo(42f) 485 l.sw 0x0(r1),r3 486 l.jal printk 487 l.sw 0x4(r1),r4 488 l.addi r1,r1,0x8 489 490 .section .rodata, "a" 49142: 492 .string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r" 493 .align 4 494 .previous 495 496 l.ori r4,r4,SPR_SR_IEE // fix the bug 497// l.sw PT_SR(r1),r4 4981: 499#endif 500 l.addi r3,r1,0 501 l.movhi r8,hi(do_IRQ) 502 l.ori r8,r8,lo(do_IRQ) 503 l.jalr r8 504 l.nop 505 l.j _ret_from_intr 506 l.nop 507 508/* ---[ 0x900: DTLB miss exception ]------------------------------------- */ 509 510 511/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */ 512 513 514/* ---[ 0xb00: Range exception ]----------------------------------------- */ 515 516UNHANDLED_EXCEPTION(_vector_0xb00,0xb00) 517 518/* ---[ 0xc00: Syscall exception ]--------------------------------------- */ 519 520/* 521 * Syscalls are a special type of exception in that they are 522 * _explicitly_ invoked by userspace and can therefore be 523 * held to conform to the same ABI as normal functions with 524 * respect to whether registers are preserved across the call 525 * or not. 526 */ 527 528/* Upon syscall entry we just save the callee-saved registers 529 * and not the call-clobbered ones. 530 */ 531 532_string_syscall_return: 533 .string "syscall return %ld \n\r\0" 534 .align 4 535 536ENTRY(_sys_call_handler) 537 /* syscalls run with interrupts enabled */ 538 ENABLE_INTERRUPTS(r29) // enable interrupts, r29 is temp 539 540 /* r1, EPCR, ESR a already saved */ 541 l.sw PT_GPR2(r1),r2 542 /* r3-r8 must be saved because syscall restart relies 543 * on us being able to restart the syscall args... technically 544 * they should be clobbered, otherwise 545 */ 546 l.sw PT_GPR3(r1),r3 547 /* r4 already saved */ 548 /* r4 holds the EEAR address of the fault, load the original r4 */ 549 l.lwz r4,PT_GPR4(r1) 550 l.sw PT_GPR5(r1),r5 551 l.sw PT_GPR6(r1),r6 552 l.sw PT_GPR7(r1),r7 553 l.sw PT_GPR8(r1),r8 554 l.sw PT_GPR9(r1),r9 555 /* r10 already saved */ 556 l.sw PT_GPR11(r1),r11 557 l.sw PT_ORIG_GPR11(r1),r11 558 /* r12,r13 already saved */ 559 560 /* r14-r28 (even) aren't touched by the syscall fast path below 561 * so we don't need to save them. However, the functions that return 562 * to userspace via a call to switch() DO need to save these because 563 * switch() effectively clobbers them... saving these registers for 564 * such functions is handled in their syscall wrappers (see fork, vfork, 565 * and clone, below). 566 567 /* r30 is the only register we clobber in the fast path */ 568 /* r30 already saved */ 569/* l.sw PT_GPR30(r1),r30 */ 570 /* This is used by do_signal to determine whether to check for 571 * syscall restart or not */ 572 l.sw PT_SYSCALLNO(r1),r11 573 574_syscall_check_trace_enter: 575 /* If TIF_SYSCALL_TRACE is set, then we want to do syscall tracing */ 576 l.lwz r30,TI_FLAGS(r10) 577 l.andi r30,r30,_TIF_SYSCALL_TRACE 578 l.sfne r30,r0 579 l.bf _syscall_trace_enter 580 l.nop 581 582_syscall_check: 583 /* Ensure that the syscall number is reasonable */ 584 l.sfgeui r11,__NR_syscalls 585 l.bf _syscall_badsys 586 l.nop 587 588_syscall_call: 589 l.movhi r29,hi(sys_call_table) 590 l.ori r29,r29,lo(sys_call_table) 591 l.slli r11,r11,2 592 l.add r29,r29,r11 593 l.lwz r29,0(r29) 594 595 l.jalr r29 596 l.nop 597 598_syscall_return: 599 /* All syscalls return here... just pay attention to ret_from_fork 600 * which does it in a round-about way. 601 */ 602 l.sw PT_GPR11(r1),r11 // save return value 603 604#if 0 605_syscall_debug: 606 l.movhi r3,hi(_string_syscall_return) 607 l.ori r3,r3,lo(_string_syscall_return) 608 l.ori r27,r0,1 609 l.sw -4(r1),r27 610 l.sw -8(r1),r11 611 l.addi r1,r1,-8 612 l.movhi r27,hi(printk) 613 l.ori r27,r27,lo(printk) 614 l.jalr r27 615 l.nop 616 l.addi r1,r1,8 617#endif 618 619_syscall_check_trace_leave: 620 /* r30 is a callee-saved register so this should still hold the 621 * _TIF_SYSCALL_TRACE flag from _syscall_check_trace_enter above... 622 * _syscall_trace_leave expects syscall result to be in pt_regs->r11. 623 */ 624 l.sfne r30,r0 625 l.bf _syscall_trace_leave 626 l.nop 627 628/* This is where the exception-return code begins... interrupts need to be 629 * disabled the rest of the way here because we can't afford to miss any 630 * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */ 631 632_syscall_check_work: 633 /* Here we need to disable interrupts */ 634 DISABLE_INTERRUPTS(r27,r29) 635 l.lwz r30,TI_FLAGS(r10) 636 l.andi r30,r30,_TIF_WORK_MASK 637 l.sfne r30,r0 638 639 l.bnf _syscall_resume_userspace 640 l.nop 641 642 /* Work pending follows a different return path, so we need to 643 * make sure that all the call-saved registers get into pt_regs 644 * before branching... 645 */ 646 l.sw PT_GPR14(r1),r14 647 l.sw PT_GPR16(r1),r16 648 l.sw PT_GPR18(r1),r18 649 l.sw PT_GPR20(r1),r20 650 l.sw PT_GPR22(r1),r22 651 l.sw PT_GPR24(r1),r24 652 l.sw PT_GPR26(r1),r26 653 l.sw PT_GPR28(r1),r28 654 655 /* _work_pending needs to be called with interrupts disabled */ 656 l.j _work_pending 657 l.nop 658 659_syscall_resume_userspace: 660// ENABLE_INTERRUPTS(r29) 661 662 663/* This is the hot path for returning to userspace from a syscall. If there's 664 * work to be done and the branch to _work_pending was taken above, then the 665 * return to userspace will be done via the normal exception return path... 666 * that path restores _all_ registers and will overwrite the "clobbered" 667 * registers with whatever garbage is in pt_regs -- that's OK because those 668 * registers are clobbered anyway and because the extra work is insignificant 669 * in the context of the extra work that _work_pending is doing. 670 671/* Once again, syscalls are special and only guarantee to preserve the 672 * same registers as a normal function call */ 673 674/* The assumption here is that the registers r14-r28 (even) are untouched and 675 * don't need to be restored... be sure that that's really the case! 676 */ 677 678/* This is still too much... we should only be restoring what we actually 679 * clobbered... we should even be using 'scratch' (odd) regs above so that 680 * we don't need to restore anything, hardly... 681 */ 682 683 l.lwz r2,PT_GPR2(r1) 684 685 /* Restore args */ 686 /* r3-r8 are technically clobbered, but syscall restart needs these 687 * to be restored... 688 */ 689 l.lwz r3,PT_GPR3(r1) 690 l.lwz r4,PT_GPR4(r1) 691 l.lwz r5,PT_GPR5(r1) 692 l.lwz r6,PT_GPR6(r1) 693 l.lwz r7,PT_GPR7(r1) 694 l.lwz r8,PT_GPR8(r1) 695 696 l.lwz r9,PT_GPR9(r1) 697 l.lwz r10,PT_GPR10(r1) 698 l.lwz r11,PT_GPR11(r1) 699 700 /* r30 is the only register we clobber in the fast path */ 701 l.lwz r30,PT_GPR30(r1) 702 703 /* Here we use r13-r19 (odd) as scratch regs */ 704 l.lwz r13,PT_PC(r1) 705 l.lwz r15,PT_SR(r1) 706 l.lwz r1,PT_SP(r1) 707 /* Interrupts need to be disabled for setting EPCR and ESR 708 * so that another interrupt doesn't come in here and clobber 709 * them before we can use them for our l.rfe */ 710 DISABLE_INTERRUPTS(r17,r19) 711 l.mtspr r0,r13,SPR_EPCR_BASE 712 l.mtspr r0,r15,SPR_ESR_BASE 713 l.rfe 714 715/* End of hot path! 716 * Keep the below tracing and error handling out of the hot path... 717*/ 718 719_syscall_trace_enter: 720 /* Here we pass pt_regs to do_syscall_trace_enter. Make sure 721 * that function is really getting all the info it needs as 722 * pt_regs isn't a complete set of userspace regs, just the 723 * ones relevant to the syscall... 724 * 725 * Note use of delay slot for setting argument. 726 */ 727 l.jal do_syscall_trace_enter 728 l.addi r3,r1,0 729 730 /* Restore arguments (not preserved across do_syscall_trace_enter) 731 * so that we can do the syscall for real and return to the syscall 732 * hot path. 733 */ 734 l.lwz r11,PT_SYSCALLNO(r1) 735 l.lwz r3,PT_GPR3(r1) 736 l.lwz r4,PT_GPR4(r1) 737 l.lwz r5,PT_GPR5(r1) 738 l.lwz r6,PT_GPR6(r1) 739 l.lwz r7,PT_GPR7(r1) 740 741 l.j _syscall_check 742 l.lwz r8,PT_GPR8(r1) 743 744_syscall_trace_leave: 745 l.jal do_syscall_trace_leave 746 l.addi r3,r1,0 747 748 l.j _syscall_check_work 749 l.nop 750 751_syscall_badsys: 752 /* Here we effectively pretend to have executed an imaginary 753 * syscall that returns -ENOSYS and then return to the regular 754 * syscall hot path. 755 * Note that "return value" is set in the delay slot... 756 */ 757 l.j _syscall_return 758 l.addi r11,r0,-ENOSYS 759 760/******* END SYSCALL HANDLING *******/ 761 762/* ---[ 0xd00: Trap exception ]------------------------------------------ */ 763 764UNHANDLED_EXCEPTION(_vector_0xd00,0xd00) 765 766/* ---[ 0xe00: Trap exception ]------------------------------------------ */ 767 768EXCEPTION_ENTRY(_trap_handler) 769 /* r4: EA of fault (set by EXCEPTION_HANDLE) */ 770 l.jal do_trap 771 l.addi r3,r1,0 /* pt_regs */ 772 773 l.j _ret_from_exception 774 l.nop 775 776/* ---[ 0xf00: Reserved exception ]-------------------------------------- */ 777 778UNHANDLED_EXCEPTION(_vector_0xf00,0xf00) 779 780/* ---[ 0x1000: Reserved exception ]------------------------------------- */ 781 782UNHANDLED_EXCEPTION(_vector_0x1000,0x1000) 783 784/* ---[ 0x1100: Reserved exception ]------------------------------------- */ 785 786UNHANDLED_EXCEPTION(_vector_0x1100,0x1100) 787 788/* ---[ 0x1200: Reserved exception ]------------------------------------- */ 789 790UNHANDLED_EXCEPTION(_vector_0x1200,0x1200) 791 792/* ---[ 0x1300: Reserved exception ]------------------------------------- */ 793 794UNHANDLED_EXCEPTION(_vector_0x1300,0x1300) 795 796/* ---[ 0x1400: Reserved exception ]------------------------------------- */ 797 798UNHANDLED_EXCEPTION(_vector_0x1400,0x1400) 799 800/* ---[ 0x1500: Reserved exception ]------------------------------------- */ 801 802UNHANDLED_EXCEPTION(_vector_0x1500,0x1500) 803 804/* ---[ 0x1600: Reserved exception ]------------------------------------- */ 805 806UNHANDLED_EXCEPTION(_vector_0x1600,0x1600) 807 808/* ---[ 0x1700: Reserved exception ]------------------------------------- */ 809 810UNHANDLED_EXCEPTION(_vector_0x1700,0x1700) 811 812/* ---[ 0x1800: Reserved exception ]------------------------------------- */ 813 814UNHANDLED_EXCEPTION(_vector_0x1800,0x1800) 815 816/* ---[ 0x1900: Reserved exception ]------------------------------------- */ 817 818UNHANDLED_EXCEPTION(_vector_0x1900,0x1900) 819 820/* ---[ 0x1a00: Reserved exception ]------------------------------------- */ 821 822UNHANDLED_EXCEPTION(_vector_0x1a00,0x1a00) 823 824/* ---[ 0x1b00: Reserved exception ]------------------------------------- */ 825 826UNHANDLED_EXCEPTION(_vector_0x1b00,0x1b00) 827 828/* ---[ 0x1c00: Reserved exception ]------------------------------------- */ 829 830UNHANDLED_EXCEPTION(_vector_0x1c00,0x1c00) 831 832/* ---[ 0x1d00: Reserved exception ]------------------------------------- */ 833 834UNHANDLED_EXCEPTION(_vector_0x1d00,0x1d00) 835 836/* ---[ 0x1e00: Reserved exception ]------------------------------------- */ 837 838UNHANDLED_EXCEPTION(_vector_0x1e00,0x1e00) 839 840/* ---[ 0x1f00: Reserved exception ]------------------------------------- */ 841 842UNHANDLED_EXCEPTION(_vector_0x1f00,0x1f00) 843 844/* ========================================================[ return ] === */ 845 846_work_pending: 847 /* 848 * if (current_thread_info->flags & _TIF_NEED_RESCHED) 849 * schedule(); 850 */ 851 l.lwz r5,TI_FLAGS(r10) 852 l.andi r3,r5,_TIF_NEED_RESCHED 853 l.sfnei r3,0 854 l.bnf _work_notifysig 855 l.nop 856 l.jal schedule 857 l.nop 858 l.j _resume_userspace 859 l.nop 860 861/* Handle pending signals and notify-resume requests. 862 * do_notify_resume must be passed the latest pushed pt_regs, not 863 * necessarily the "userspace" ones. Also, pt_regs->syscallno 864 * must be set so that the syscall restart functionality works. 865 */ 866_work_notifysig: 867 l.jal do_notify_resume 868 l.ori r3,r1,0 /* pt_regs */ 869 870_resume_userspace: 871 DISABLE_INTERRUPTS(r3,r4) 872 l.lwz r3,TI_FLAGS(r10) 873 l.andi r3,r3,_TIF_WORK_MASK 874 l.sfnei r3,0 875 l.bf _work_pending 876 l.nop 877 878_restore_all: 879 RESTORE_ALL 880 /* This returns to userspace code */ 881 882 883ENTRY(_ret_from_intr) 884ENTRY(_ret_from_exception) 885 l.lwz r4,PT_SR(r1) 886 l.andi r3,r4,SPR_SR_SM 887 l.sfeqi r3,0 888 l.bnf _restore_all 889 l.nop 890 l.j _resume_userspace 891 l.nop 892 893ENTRY(ret_from_fork) 894 l.jal schedule_tail 895 l.nop 896 897 /* _syscall_returns expect r11 to contain return value */ 898 l.lwz r11,PT_GPR11(r1) 899 900 /* The syscall fast path return expects call-saved registers 901 * r12-r28 to be untouched, so we restore them here as they 902 * will have been effectively clobbered when arriving here 903 * via the call to switch() 904 */ 905 l.lwz r12,PT_GPR12(r1) 906 l.lwz r14,PT_GPR14(r1) 907 l.lwz r16,PT_GPR16(r1) 908 l.lwz r18,PT_GPR18(r1) 909 l.lwz r20,PT_GPR20(r1) 910 l.lwz r22,PT_GPR22(r1) 911 l.lwz r24,PT_GPR24(r1) 912 l.lwz r26,PT_GPR26(r1) 913 l.lwz r28,PT_GPR28(r1) 914 915 l.j _syscall_return 916 l.nop 917 918/* Since syscalls don't save call-clobbered registers, the args to 919 * kernel_thread_helper will need to be passed through callee-saved 920 * registers and copied to the parameter registers when the thread 921 * begins running. 922 * 923 * See arch/openrisc/kernel/process.c: 924 * The args are passed as follows: 925 * arg1 (r3) : passed in r20 926 * arg2 (r4) : passed in r22 927 */ 928 929ENTRY(_kernel_thread_helper) 930 l.or r3,r20,r0 931 l.or r4,r22,r0 932 l.movhi r31,hi(kernel_thread_helper) 933 l.ori r31,r31,lo(kernel_thread_helper) 934 l.jr r31 935 l.nop 936 937 938/* ========================================================[ switch ] === */ 939 940/* 941 * This routine switches between two different tasks. The process 942 * state of one is saved on its kernel stack. Then the state 943 * of the other is restored from its kernel stack. The memory 944 * management hardware is updated to the second process's state. 945 * Finally, we can return to the second process, via the 'return'. 946 * 947 * Note: there are two ways to get to the "going out" portion 948 * of this code; either by coming in via the entry (_switch) 949 * or via "fork" which must set up an environment equivalent 950 * to the "_switch" path. If you change this (or in particular, the 951 * SAVE_REGS macro), you'll have to change the fork code also. 952 */ 953 954 955/* _switch MUST never lay on page boundry, cause it runs from 956 * effective addresses and beeing interrupted by iTLB miss would kill it. 957 * dTLB miss seams to never accour in the bad place since data accesses 958 * are from task structures which are always page aligned. 959 * 960 * The problem happens in RESTORE_ALL_NO_R11 where we first set the EPCR 961 * register, then load the previous register values and only at the end call 962 * the l.rfe instruction. If get TLB miss in beetwen the EPCR register gets 963 * garbled and we end up calling l.rfe with the wrong EPCR. (same probably 964 * holds for ESR) 965 * 966 * To avoid this problems it is sufficient to align _switch to 967 * some nice round number smaller than it's size... 968 */ 969 970/* ABI rules apply here... we either enter _switch via schedule() or via 971 * an imaginary call to which we shall return at return_from_fork. Either 972 * way, we are a function call and only need to preserve the callee-saved 973 * registers when we return. As such, we don't need to save the registers 974 * on the stack that we won't be returning as they were... 975 */ 976 977 .align 0x400 978ENTRY(_switch) 979 /* We don't store SR as _switch only gets called in a context where 980 * the SR will be the same going in and coming out... */ 981 982 /* Set up new pt_regs struct for saving task state */ 983 l.addi r1,r1,-(INT_FRAME_SIZE) 984 985 /* No need to store r1/PT_SP as it goes into KSP below */ 986 l.sw PT_GPR2(r1),r2 987 l.sw PT_GPR9(r1),r9 988 /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being 989 * and expects r12 to be callee-saved... */ 990 l.sw PT_GPR12(r1),r12 991 l.sw PT_GPR14(r1),r14 992 l.sw PT_GPR16(r1),r16 993 l.sw PT_GPR18(r1),r18 994 l.sw PT_GPR20(r1),r20 995 l.sw PT_GPR22(r1),r22 996 l.sw PT_GPR24(r1),r24 997 l.sw PT_GPR26(r1),r26 998 l.sw PT_GPR28(r1),r28 999 l.sw PT_GPR30(r1),r30 1000 1001 l.addi r11,r10,0 /* Save old 'current' to 'last' return value*/ 1002 1003 /* We use thread_info->ksp for storing the address of the above 1004 * structure so that we can get back to it later... we don't want 1005 * to lose the value of thread_info->ksp, though, so store it as 1006 * pt_regs->sp so that we can easily restore it when we are made 1007 * live again... 1008 */ 1009 1010 /* Save the old value of thread_info->ksp as pt_regs->sp */ 1011 l.lwz r29,TI_KSP(r10) 1012 l.sw PT_SP(r1),r29 1013 1014 /* Swap kernel stack pointers */ 1015 l.sw TI_KSP(r10),r1 /* Save old stack pointer */ 1016 l.or r10,r4,r0 /* Set up new current_thread_info */ 1017 l.lwz r1,TI_KSP(r10) /* Load new stack pointer */ 1018 1019 /* Restore the old value of thread_info->ksp */ 1020 l.lwz r29,PT_SP(r1) 1021 l.sw TI_KSP(r10),r29 1022 1023 /* ...and restore the registers, except r11 because the return value 1024 * has already been set above. 1025 */ 1026 l.lwz r2,PT_GPR2(r1) 1027 l.lwz r9,PT_GPR9(r1) 1028 /* No need to restore r10 */ 1029 /* ...and do not restore r11 */ 1030 1031 /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being 1032 * and expects r12 to be callee-saved... */ 1033 l.lwz r12,PT_GPR12(r1) 1034 l.lwz r14,PT_GPR14(r1) 1035 l.lwz r16,PT_GPR16(r1) 1036 l.lwz r18,PT_GPR18(r1) 1037 l.lwz r20,PT_GPR20(r1) 1038 l.lwz r22,PT_GPR22(r1) 1039 l.lwz r24,PT_GPR24(r1) 1040 l.lwz r26,PT_GPR26(r1) 1041 l.lwz r28,PT_GPR28(r1) 1042 l.lwz r30,PT_GPR30(r1) 1043 1044 /* Unwind stack to pre-switch state */ 1045 l.addi r1,r1,(INT_FRAME_SIZE) 1046 1047 /* Return via the link-register back to where we 'came from', where that can be 1048 * either schedule() or return_from_fork()... */ 1049 l.jr r9 1050 l.nop 1051 1052/* ==================================================================== */ 1053 1054/* These all use the delay slot for setting the argument register, so the 1055 * jump is always happening after the l.addi instruction. 1056 * 1057 * These are all just wrappers that don't touch the link-register r9, so the 1058 * return from the "real" syscall function will return back to the syscall 1059 * code that did the l.jal that brought us here. 1060 */ 1061 1062/* fork requires that we save all the callee-saved registers because they 1063 * are all effectively clobbered by the call to _switch. Here we store 1064 * all the registers that aren't touched by the syscall fast path and thus 1065 * weren't saved there. 1066 */ 1067 1068_fork_save_extra_regs_and_call: 1069 l.sw PT_GPR14(r1),r14 1070 l.sw PT_GPR16(r1),r16 1071 l.sw PT_GPR18(r1),r18 1072 l.sw PT_GPR20(r1),r20 1073 l.sw PT_GPR22(r1),r22 1074 l.sw PT_GPR24(r1),r24 1075 l.sw PT_GPR26(r1),r26 1076 l.jr r29 1077 l.sw PT_GPR28(r1),r28 1078 1079ENTRY(sys_clone) 1080 l.movhi r29,hi(_sys_clone) 1081 l.ori r29,r29,lo(_sys_clone) 1082 l.j _fork_save_extra_regs_and_call 1083 l.addi r7,r1,0 1084 1085ENTRY(sys_fork) 1086 l.movhi r29,hi(_sys_fork) 1087 l.ori r29,r29,lo(_sys_fork) 1088 l.j _fork_save_extra_regs_and_call 1089 l.addi r3,r1,0 1090 1091ENTRY(sys_execve) 1092 l.j _sys_execve 1093 l.addi r6,r1,0 1094 1095ENTRY(sys_sigaltstack) 1096 l.j _sys_sigaltstack 1097 l.addi r5,r1,0 1098 1099ENTRY(sys_rt_sigreturn) 1100 l.j _sys_rt_sigreturn 1101 l.addi r3,r1,0 1102 1103/* This is a catch-all syscall for atomic instructions for the OpenRISC 1000. 1104 * The functions takes a variable number of parameters depending on which 1105 * particular flavour of atomic you want... parameter 1 is a flag identifying 1106 * the atomic in question. Currently, this function implements the 1107 * following variants: 1108 * 1109 * XCHG: 1110 * @flag: 1 1111 * @ptr1: 1112 * @ptr2: 1113 * Atomically exchange the values in pointers 1 and 2. 1114 * 1115 */ 1116 1117ENTRY(sys_or1k_atomic) 1118 /* FIXME: This ignores r3 and always does an XCHG */ 1119 DISABLE_INTERRUPTS(r17,r19) 1120 l.lwz r30,0(r4) 1121 l.lwz r28,0(r5) 1122 l.sw 0(r4),r28 1123 l.sw 0(r5),r30 1124 ENABLE_INTERRUPTS(r17) 1125 l.jr r9 1126 l.or r11,r0,r0 1127 1128/* ============================================================[ EOF ]=== */ 1129