1 /* 2 * RM200 specific code 3 * 4 * This file is subject to the terms and conditions of the GNU General Public 5 * License. See the file "COPYING" in the main directory of this archive 6 * for more details. 7 * 8 * Copyright (C) 2006,2007 Thomas Bogendoerfer (tsbogend@alpha.franken.de) 9 * 10 * i8259 parts ripped out of arch/mips/kernel/i8259.c 11 */ 12 13 #include <linux/delay.h> 14 #include <linux/init.h> 15 #include <linux/interrupt.h> 16 #include <linux/irq.h> 17 #include <linux/platform_device.h> 18 #include <linux/serial_8250.h> 19 #include <linux/io.h> 20 21 #include <asm/sni.h> 22 #include <asm/time.h> 23 #include <asm/irq_cpu.h> 24 25 #define RM200_I8259A_IRQ_BASE 32 26 27 #define MEMPORT(_base,_irq) \ 28 { \ 29 .mapbase = _base, \ 30 .irq = _irq, \ 31 .uartclk = 1843200, \ 32 .iotype = UPIO_MEM, \ 33 .flags = UPF_BOOT_AUTOCONF|UPF_IOREMAP, \ 34 } 35 36 static struct plat_serial8250_port rm200_data[] = { 37 MEMPORT(0x160003f8, RM200_I8259A_IRQ_BASE + 4), 38 MEMPORT(0x160002f8, RM200_I8259A_IRQ_BASE + 3), 39 { }, 40 }; 41 42 static struct platform_device rm200_serial8250_device = { 43 .name = "serial8250", 44 .id = PLAT8250_DEV_PLATFORM, 45 .dev = { 46 .platform_data = rm200_data, 47 }, 48 }; 49 50 static struct resource rm200_ds1216_rsrc[] = { 51 { 52 .start = 0x1cd41ffc, 53 .end = 0x1cd41fff, 54 .flags = IORESOURCE_MEM 55 } 56 }; 57 58 static struct platform_device rm200_ds1216_device = { 59 .name = "rtc-ds1216", 60 .num_resources = ARRAY_SIZE(rm200_ds1216_rsrc), 61 .resource = rm200_ds1216_rsrc 62 }; 63 64 static struct resource snirm_82596_rm200_rsrc[] = { 65 { 66 .start = 0x18000000, 67 .end = 0x180fffff, 68 .flags = IORESOURCE_MEM 69 }, 70 { 71 .start = 0x1b000000, 72 .end = 0x1b000004, 73 .flags = IORESOURCE_MEM 74 }, 75 { 76 .start = 0x1ff00000, 77 .end = 0x1ff00020, 78 .flags = IORESOURCE_MEM 79 }, 80 { 81 .start = 27, 82 .end = 27, 83 .flags = IORESOURCE_IRQ 84 }, 85 { 86 .flags = 0x00 87 } 88 }; 89 90 static struct platform_device snirm_82596_rm200_pdev = { 91 .name = "snirm_82596", 92 .num_resources = ARRAY_SIZE(snirm_82596_rm200_rsrc), 93 .resource = snirm_82596_rm200_rsrc 94 }; 95 96 static struct resource snirm_53c710_rm200_rsrc[] = { 97 { 98 .start = 0x19000000, 99 .end = 0x190fffff, 100 .flags = IORESOURCE_MEM 101 }, 102 { 103 .start = 26, 104 .end = 26, 105 .flags = IORESOURCE_IRQ 106 } 107 }; 108 109 static struct platform_device snirm_53c710_rm200_pdev = { 110 .name = "snirm_53c710", 111 .num_resources = ARRAY_SIZE(snirm_53c710_rm200_rsrc), 112 .resource = snirm_53c710_rm200_rsrc 113 }; 114 115 static int __init snirm_setup_devinit(void) 116 { 117 if (sni_brd_type == SNI_BRD_RM200) { 118 platform_device_register(&rm200_serial8250_device); 119 platform_device_register(&rm200_ds1216_device); 120 platform_device_register(&snirm_82596_rm200_pdev); 121 platform_device_register(&snirm_53c710_rm200_pdev); 122 sni_eisa_root_init(); 123 } 124 return 0; 125 } 126 127 device_initcall(snirm_setup_devinit); 128 129 /* 130 * RM200 has an ISA and an EISA bus. The iSA bus is only used 131 * for onboard devices and also has twi i8259 PICs. Since these 132 * PICs are no accessible via inb/outb the following code uses 133 * readb/writeb to access them 134 */ 135 136 static DEFINE_RAW_SPINLOCK(sni_rm200_i8259A_lock); 137 #define PIC_CMD 0x00 138 #define PIC_IMR 0x01 139 #define PIC_ISR PIC_CMD 140 #define PIC_POLL PIC_ISR 141 #define PIC_OCW3 PIC_ISR 142 143 /* i8259A PIC related value */ 144 #define PIC_CASCADE_IR 2 145 #define MASTER_ICW4_DEFAULT 0x01 146 #define SLAVE_ICW4_DEFAULT 0x01 147 148 /* 149 * This contains the irq mask for both 8259A irq controllers, 150 */ 151 static unsigned int rm200_cached_irq_mask = 0xffff; 152 static __iomem u8 *rm200_pic_master; 153 static __iomem u8 *rm200_pic_slave; 154 155 #define cached_master_mask (rm200_cached_irq_mask) 156 #define cached_slave_mask (rm200_cached_irq_mask >> 8) 157 158 static void sni_rm200_disable_8259A_irq(struct irq_data *d) 159 { 160 unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE; 161 unsigned long flags; 162 163 mask = 1 << irq; 164 raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); 165 rm200_cached_irq_mask |= mask; 166 if (irq & 8) 167 writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); 168 else 169 writeb(cached_master_mask, rm200_pic_master + PIC_IMR); 170 raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); 171 } 172 173 static void sni_rm200_enable_8259A_irq(struct irq_data *d) 174 { 175 unsigned int mask, irq = d->irq - RM200_I8259A_IRQ_BASE; 176 unsigned long flags; 177 178 mask = ~(1 << irq); 179 raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); 180 rm200_cached_irq_mask &= mask; 181 if (irq & 8) 182 writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); 183 else 184 writeb(cached_master_mask, rm200_pic_master + PIC_IMR); 185 raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); 186 } 187 188 static inline int sni_rm200_i8259A_irq_real(unsigned int irq) 189 { 190 int value; 191 int irqmask = 1 << irq; 192 193 if (irq < 8) { 194 writeb(0x0B, rm200_pic_master + PIC_CMD); 195 value = readb(rm200_pic_master + PIC_CMD) & irqmask; 196 writeb(0x0A, rm200_pic_master + PIC_CMD); 197 return value; 198 } 199 writeb(0x0B, rm200_pic_slave + PIC_CMD); /* ISR register */ 200 value = readb(rm200_pic_slave + PIC_CMD) & (irqmask >> 8); 201 writeb(0x0A, rm200_pic_slave + PIC_CMD); 202 return value; 203 } 204 205 /* 206 * Careful! The 8259A is a fragile beast, it pretty 207 * much _has_ to be done exactly like this (mask it 208 * first, _then_ send the EOI, and the order of EOI 209 * to the two 8259s is important! 210 */ 211 void sni_rm200_mask_and_ack_8259A(struct irq_data *d) 212 { 213 unsigned int irqmask, irq = d->irq - RM200_I8259A_IRQ_BASE; 214 unsigned long flags; 215 216 irqmask = 1 << irq; 217 raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); 218 /* 219 * Lightweight spurious IRQ detection. We do not want 220 * to overdo spurious IRQ handling - it's usually a sign 221 * of hardware problems, so we only do the checks we can 222 * do without slowing down good hardware unnecessarily. 223 * 224 * Note that IRQ7 and IRQ15 (the two spurious IRQs 225 * usually resulting from the 8259A-1|2 PICs) occur 226 * even if the IRQ is masked in the 8259A. Thus we 227 * can check spurious 8259A IRQs without doing the 228 * quite slow i8259A_irq_real() call for every IRQ. 229 * This does not cover 100% of spurious interrupts, 230 * but should be enough to warn the user that there 231 * is something bad going on ... 232 */ 233 if (rm200_cached_irq_mask & irqmask) 234 goto spurious_8259A_irq; 235 rm200_cached_irq_mask |= irqmask; 236 237 handle_real_irq: 238 if (irq & 8) { 239 readb(rm200_pic_slave + PIC_IMR); 240 writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); 241 writeb(0x60+(irq & 7), rm200_pic_slave + PIC_CMD); 242 writeb(0x60+PIC_CASCADE_IR, rm200_pic_master + PIC_CMD); 243 } else { 244 readb(rm200_pic_master + PIC_IMR); 245 writeb(cached_master_mask, rm200_pic_master + PIC_IMR); 246 writeb(0x60+irq, rm200_pic_master + PIC_CMD); 247 } 248 raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); 249 return; 250 251 spurious_8259A_irq: 252 /* 253 * this is the slow path - should happen rarely. 254 */ 255 if (sni_rm200_i8259A_irq_real(irq)) 256 /* 257 * oops, the IRQ _is_ in service according to the 258 * 8259A - not spurious, go handle it. 259 */ 260 goto handle_real_irq; 261 262 { 263 static int spurious_irq_mask; 264 /* 265 * At this point we can be sure the IRQ is spurious, 266 * let's ACK and report it. [once per IRQ] 267 */ 268 if (!(spurious_irq_mask & irqmask)) { 269 printk(KERN_DEBUG 270 "spurious RM200 8259A interrupt: IRQ%d.\n", irq); 271 spurious_irq_mask |= irqmask; 272 } 273 atomic_inc(&irq_err_count); 274 /* 275 * Theoretically we do not have to handle this IRQ, 276 * but in Linux this does not cause problems and is 277 * simpler for us. 278 */ 279 goto handle_real_irq; 280 } 281 } 282 283 static struct irq_chip sni_rm200_i8259A_chip = { 284 .name = "RM200-XT-PIC", 285 .irq_mask = sni_rm200_disable_8259A_irq, 286 .irq_unmask = sni_rm200_enable_8259A_irq, 287 .irq_mask_ack = sni_rm200_mask_and_ack_8259A, 288 }; 289 290 /* 291 * Do the traditional i8259 interrupt polling thing. This is for the few 292 * cases where no better interrupt acknowledge method is available and we 293 * absolutely must touch the i8259. 294 */ 295 static inline int sni_rm200_i8259_irq(void) 296 { 297 int irq; 298 299 raw_spin_lock(&sni_rm200_i8259A_lock); 300 301 /* Perform an interrupt acknowledge cycle on controller 1. */ 302 writeb(0x0C, rm200_pic_master + PIC_CMD); /* prepare for poll */ 303 irq = readb(rm200_pic_master + PIC_CMD) & 7; 304 if (irq == PIC_CASCADE_IR) { 305 /* 306 * Interrupt is cascaded so perform interrupt 307 * acknowledge on controller 2. 308 */ 309 writeb(0x0C, rm200_pic_slave + PIC_CMD); /* prepare for poll */ 310 irq = (readb(rm200_pic_slave + PIC_CMD) & 7) + 8; 311 } 312 313 if (unlikely(irq == 7)) { 314 /* 315 * This may be a spurious interrupt. 316 * 317 * Read the interrupt status register (ISR). If the most 318 * significant bit is not set then there is no valid 319 * interrupt. 320 */ 321 writeb(0x0B, rm200_pic_master + PIC_ISR); /* ISR register */ 322 if (~readb(rm200_pic_master + PIC_ISR) & 0x80) 323 irq = -1; 324 } 325 326 raw_spin_unlock(&sni_rm200_i8259A_lock); 327 328 return likely(irq >= 0) ? irq + RM200_I8259A_IRQ_BASE : irq; 329 } 330 331 void sni_rm200_init_8259A(void) 332 { 333 unsigned long flags; 334 335 raw_spin_lock_irqsave(&sni_rm200_i8259A_lock, flags); 336 337 writeb(0xff, rm200_pic_master + PIC_IMR); 338 writeb(0xff, rm200_pic_slave + PIC_IMR); 339 340 writeb(0x11, rm200_pic_master + PIC_CMD); 341 writeb(0, rm200_pic_master + PIC_IMR); 342 writeb(1U << PIC_CASCADE_IR, rm200_pic_master + PIC_IMR); 343 writeb(MASTER_ICW4_DEFAULT, rm200_pic_master + PIC_IMR); 344 writeb(0x11, rm200_pic_slave + PIC_CMD); 345 writeb(8, rm200_pic_slave + PIC_IMR); 346 writeb(PIC_CASCADE_IR, rm200_pic_slave + PIC_IMR); 347 writeb(SLAVE_ICW4_DEFAULT, rm200_pic_slave + PIC_IMR); 348 udelay(100); /* wait for 8259A to initialize */ 349 350 writeb(cached_master_mask, rm200_pic_master + PIC_IMR); 351 writeb(cached_slave_mask, rm200_pic_slave + PIC_IMR); 352 353 raw_spin_unlock_irqrestore(&sni_rm200_i8259A_lock, flags); 354 } 355 356 /* 357 * IRQ2 is cascade interrupt to second interrupt controller 358 */ 359 360 static struct resource sni_rm200_pic1_resource = { 361 .name = "onboard ISA pic1", 362 .start = 0x16000020, 363 .end = 0x16000023, 364 .flags = IORESOURCE_BUSY 365 }; 366 367 static struct resource sni_rm200_pic2_resource = { 368 .name = "onboard ISA pic2", 369 .start = 0x160000a0, 370 .end = 0x160000a3, 371 .flags = IORESOURCE_BUSY 372 }; 373 374 /* ISA irq handler */ 375 static irqreturn_t sni_rm200_i8259A_irq_handler(int dummy, void *p) 376 { 377 int irq; 378 379 irq = sni_rm200_i8259_irq(); 380 if (unlikely(irq < 0)) 381 return IRQ_NONE; 382 383 do_IRQ(irq); 384 return IRQ_HANDLED; 385 } 386 387 void __init sni_rm200_i8259_irqs(void) 388 { 389 int i; 390 391 rm200_pic_master = ioremap(0x16000020, 4); 392 if (!rm200_pic_master) 393 return; 394 rm200_pic_slave = ioremap(0x160000a0, 4); 395 if (!rm200_pic_slave) { 396 iounmap(rm200_pic_master); 397 return; 398 } 399 400 insert_resource(&iomem_resource, &sni_rm200_pic1_resource); 401 insert_resource(&iomem_resource, &sni_rm200_pic2_resource); 402 403 sni_rm200_init_8259A(); 404 405 for (i = RM200_I8259A_IRQ_BASE; i < RM200_I8259A_IRQ_BASE + 16; i++) 406 irq_set_chip_and_handler(i, &sni_rm200_i8259A_chip, 407 handle_level_irq); 408 409 if (request_irq(RM200_I8259A_IRQ_BASE + PIC_CASCADE_IR, no_action, 410 IRQF_NO_THREAD, "cascade", NULL)) 411 pr_err("Failed to register cascade interrupt\n"); 412 } 413 414 415 #define SNI_RM200_INT_STAT_REG CKSEG1ADDR(0xbc000000) 416 #define SNI_RM200_INT_ENA_REG CKSEG1ADDR(0xbc080000) 417 418 #define SNI_RM200_INT_START 24 419 #define SNI_RM200_INT_END 28 420 421 static void enable_rm200_irq(struct irq_data *d) 422 { 423 unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START); 424 425 *(volatile u8 *)SNI_RM200_INT_ENA_REG &= ~mask; 426 } 427 428 void disable_rm200_irq(struct irq_data *d) 429 { 430 unsigned int mask = 1 << (d->irq - SNI_RM200_INT_START); 431 432 *(volatile u8 *)SNI_RM200_INT_ENA_REG |= mask; 433 } 434 435 static struct irq_chip rm200_irq_type = { 436 .name = "RM200", 437 .irq_mask = disable_rm200_irq, 438 .irq_unmask = enable_rm200_irq, 439 }; 440 441 static void sni_rm200_hwint(void) 442 { 443 u32 pending = read_c0_cause() & read_c0_status(); 444 u8 mask; 445 u8 stat; 446 int irq; 447 448 if (pending & C_IRQ5) 449 do_IRQ(MIPS_CPU_IRQ_BASE + 7); 450 else if (pending & C_IRQ0) { 451 clear_c0_status(IE_IRQ0); 452 mask = *(volatile u8 *)SNI_RM200_INT_ENA_REG ^ 0x1f; 453 stat = *(volatile u8 *)SNI_RM200_INT_STAT_REG ^ 0x14; 454 irq = ffs(stat & mask & 0x1f); 455 456 if (likely(irq > 0)) 457 do_IRQ(irq + SNI_RM200_INT_START - 1); 458 set_c0_status(IE_IRQ0); 459 } 460 } 461 462 void __init sni_rm200_irq_init(void) 463 { 464 int i; 465 466 * (volatile u8 *)SNI_RM200_INT_ENA_REG = 0x1f; 467 468 sni_rm200_i8259_irqs(); 469 mips_cpu_irq_init(); 470 /* Actually we've got more interrupts to handle ... */ 471 for (i = SNI_RM200_INT_START; i <= SNI_RM200_INT_END; i++) 472 irq_set_chip_and_handler(i, &rm200_irq_type, handle_level_irq); 473 sni_hwint = sni_rm200_hwint; 474 change_c0_status(ST0_IM, IE_IRQ0); 475 if (request_irq(SNI_RM200_INT_START + 0, sni_rm200_i8259A_irq_handler, 476 0, "onboard ISA", NULL)) 477 pr_err("Failed to register onboard ISA interrupt\n"); 478 if (request_irq(SNI_RM200_INT_START + 1, sni_isa_irq_handler, 0, "ISA", 479 NULL)) 480 pr_err("Failed to register ISA interrupt\n"); 481 } 482 483 void __init sni_rm200_init(void) 484 { 485 } 486