1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation 4 */ 5 #include <linux/kernel.h> 6 #include <linux/init.h> 7 #include <linux/linkage.h> 8 #include <linux/interrupt.h> 9 #include <linux/spinlock.h> 10 #include <linux/smp.h> 11 #include <linux/mm.h> 12 #include <linux/kernel_stat.h> 13 14 #include <asm/errno.h> 15 #include <asm/signal.h> 16 #include <asm/time.h> 17 #include <asm/io.h> 18 19 #include <asm/sibyte/sb1250_regs.h> 20 #include <asm/sibyte/sb1250_int.h> 21 #include <asm/sibyte/sb1250_uart.h> 22 #include <asm/sibyte/sb1250_scd.h> 23 #include <asm/sibyte/sb1250.h> 24 25 /* 26 * These are the routines that handle all the low level interrupt stuff. 27 * Actions handled here are: initialization of the interrupt map, requesting of 28 * interrupt lines by handlers, dispatching if interrupts to handlers, probing 29 * for interrupt lines 30 */ 31 32 #ifdef CONFIG_SIBYTE_HAS_LDT 33 extern unsigned long ldt_eoi_space; 34 #endif 35 36 /* Store the CPU id (not the logical number) */ 37 int sb1250_irq_owner[SB1250_NR_IRQS]; 38 39 static DEFINE_RAW_SPINLOCK(sb1250_imr_lock); 40 41 void sb1250_mask_irq(int cpu, int irq) 42 { 43 unsigned long flags; 44 u64 cur_ints; 45 46 raw_spin_lock_irqsave(&sb1250_imr_lock, flags); 47 cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + 48 R_IMR_INTERRUPT_MASK)); 49 cur_ints |= (((u64) 1) << irq); 50 ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + 51 R_IMR_INTERRUPT_MASK)); 52 raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); 53 } 54 55 void sb1250_unmask_irq(int cpu, int irq) 56 { 57 unsigned long flags; 58 u64 cur_ints; 59 60 raw_spin_lock_irqsave(&sb1250_imr_lock, flags); 61 cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + 62 R_IMR_INTERRUPT_MASK)); 63 cur_ints &= ~(((u64) 1) << irq); 64 ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + 65 R_IMR_INTERRUPT_MASK)); 66 raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); 67 } 68 69 #ifdef CONFIG_SMP 70 static int sb1250_set_affinity(struct irq_data *d, const struct cpumask *mask, 71 bool force) 72 { 73 int i = 0, old_cpu, cpu, int_on; 74 unsigned int irq = d->irq; 75 u64 cur_ints; 76 unsigned long flags; 77 78 i = cpumask_first_and(mask, cpu_online_mask); 79 80 /* Convert logical CPU to physical CPU */ 81 cpu = cpu_logical_map(i); 82 83 /* Protect against other affinity changers and IMR manipulation */ 84 raw_spin_lock_irqsave(&sb1250_imr_lock, flags); 85 86 /* Swizzle each CPU's IMR (but leave the IP selection alone) */ 87 old_cpu = sb1250_irq_owner[irq]; 88 cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) + 89 R_IMR_INTERRUPT_MASK)); 90 int_on = !(cur_ints & (((u64) 1) << irq)); 91 if (int_on) { 92 /* If it was on, mask it */ 93 cur_ints |= (((u64) 1) << irq); 94 ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) + 95 R_IMR_INTERRUPT_MASK)); 96 } 97 sb1250_irq_owner[irq] = cpu; 98 if (int_on) { 99 /* unmask for the new CPU */ 100 cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) + 101 R_IMR_INTERRUPT_MASK)); 102 cur_ints &= ~(((u64) 1) << irq); 103 ____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) + 104 R_IMR_INTERRUPT_MASK)); 105 } 106 raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags); 107 108 return 0; 109 } 110 #endif 111 112 static void disable_sb1250_irq(struct irq_data *d) 113 { 114 unsigned int irq = d->irq; 115 116 sb1250_mask_irq(sb1250_irq_owner[irq], irq); 117 } 118 119 static void enable_sb1250_irq(struct irq_data *d) 120 { 121 unsigned int irq = d->irq; 122 123 sb1250_unmask_irq(sb1250_irq_owner[irq], irq); 124 } 125 126 127 static void ack_sb1250_irq(struct irq_data *d) 128 { 129 unsigned int irq = d->irq; 130 #ifdef CONFIG_SIBYTE_HAS_LDT 131 u64 pending; 132 133 /* 134 * If the interrupt was an HT interrupt, now is the time to 135 * clear it. NOTE: we assume the HT bridge was set up to 136 * deliver the interrupts to all CPUs (which makes affinity 137 * changing easier for us) 138 */ 139 pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq], 140 R_IMR_LDT_INTERRUPT))); 141 pending &= ((u64)1 << (irq)); 142 if (pending) { 143 int i; 144 for (i=0; i<NR_CPUS; i++) { 145 int cpu; 146 #ifdef CONFIG_SMP 147 cpu = cpu_logical_map(i); 148 #else 149 cpu = i; 150 #endif 151 /* 152 * Clear for all CPUs so an affinity switch 153 * doesn't find an old status 154 */ 155 __raw_writeq(pending, 156 IOADDR(A_IMR_REGISTER(cpu, 157 R_IMR_LDT_INTERRUPT_CLR))); 158 } 159 160 /* 161 * Generate EOI. For Pass 1 parts, EOI is a nop. For 162 * Pass 2, the LDT world may be edge-triggered, but 163 * this EOI shouldn't hurt. If they are 164 * level-sensitive, the EOI is required. 165 */ 166 *(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0; 167 } 168 #endif 169 sb1250_mask_irq(sb1250_irq_owner[irq], irq); 170 } 171 172 static struct irq_chip sb1250_irq_type = { 173 .name = "SB1250-IMR", 174 .irq_mask_ack = ack_sb1250_irq, 175 .irq_unmask = enable_sb1250_irq, 176 .irq_mask = disable_sb1250_irq, 177 #ifdef CONFIG_SMP 178 .irq_set_affinity = sb1250_set_affinity 179 #endif 180 }; 181 182 void __init init_sb1250_irqs(void) 183 { 184 int i; 185 186 for (i = 0; i < SB1250_NR_IRQS; i++) { 187 irq_set_chip_and_handler(i, &sb1250_irq_type, 188 handle_level_irq); 189 sb1250_irq_owner[i] = 0; 190 } 191 } 192 193 194 /* 195 * arch_init_irq is called early in the boot sequence from init/main.c via 196 * init_IRQ. It is responsible for setting up the interrupt mapper and 197 * installing the handler that will be responsible for dispatching interrupts 198 * to the "right" place. 199 */ 200 /* 201 * For now, map all interrupts to IP[2]. We could save 202 * some cycles by parceling out system interrupts to different 203 * IP lines, but keep it simple for bringup. We'll also direct 204 * all interrupts to a single CPU; we should probably route 205 * PCI and LDT to one cpu and everything else to the other 206 * to balance the load a bit. 207 * 208 * On the second cpu, everything is set to IP5, which is 209 * ignored, EXCEPT the mailbox interrupt. That one is 210 * set to IP[2] so it is handled. This is needed so we 211 * can do cross-cpu function calls, as required by SMP 212 */ 213 214 #define IMR_IP2_VAL K_INT_MAP_I0 215 #define IMR_IP3_VAL K_INT_MAP_I1 216 #define IMR_IP4_VAL K_INT_MAP_I2 217 #define IMR_IP5_VAL K_INT_MAP_I3 218 #define IMR_IP6_VAL K_INT_MAP_I4 219 220 void __init arch_init_irq(void) 221 { 222 223 unsigned int i; 224 u64 tmp; 225 unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | 226 STATUSF_IP1 | STATUSF_IP0; 227 228 /* Default everything to IP2 */ 229 for (i = 0; i < SB1250_NR_IRQS; i++) { /* was I0 */ 230 __raw_writeq(IMR_IP2_VAL, 231 IOADDR(A_IMR_REGISTER(0, 232 R_IMR_INTERRUPT_MAP_BASE) + 233 (i << 3))); 234 __raw_writeq(IMR_IP2_VAL, 235 IOADDR(A_IMR_REGISTER(1, 236 R_IMR_INTERRUPT_MAP_BASE) + 237 (i << 3))); 238 } 239 240 init_sb1250_irqs(); 241 242 /* 243 * Map the high 16 bits of the mailbox registers to IP[3], for 244 * inter-cpu messages 245 */ 246 /* Was I1 */ 247 __raw_writeq(IMR_IP3_VAL, 248 IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + 249 (K_INT_MBOX_0 << 3))); 250 __raw_writeq(IMR_IP3_VAL, 251 IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) + 252 (K_INT_MBOX_0 << 3))); 253 254 /* Clear the mailboxes. The firmware may leave them dirty */ 255 __raw_writeq(0xffffffffffffffffULL, 256 IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU))); 257 __raw_writeq(0xffffffffffffffffULL, 258 IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU))); 259 260 /* Mask everything except the mailbox registers for both cpus */ 261 tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0); 262 __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK))); 263 __raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK))); 264 265 /* Enable necessary IPs, disable the rest */ 266 change_c0_status(ST0_IM, imask); 267 } 268 269 extern void sb1250_mailbox_interrupt(void); 270 271 static inline void dispatch_ip2(void) 272 { 273 unsigned int cpu = smp_processor_id(); 274 unsigned long long mask; 275 276 /* 277 * Default...we've hit an IP[2] interrupt, which means we've got to 278 * check the 1250 interrupt registers to figure out what to do. Need 279 * to detect which CPU we're on, now that smp_affinity is supported. 280 */ 281 mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu, 282 R_IMR_INTERRUPT_STATUS_BASE))); 283 if (mask) 284 do_IRQ(fls64(mask) - 1); 285 } 286 287 asmlinkage void plat_irq_dispatch(void) 288 { 289 unsigned int cpu = smp_processor_id(); 290 unsigned int pending; 291 292 /* 293 * What a pain. We have to be really careful saving the upper 32 bits 294 * of any * register across function calls if we don't want them 295 * trashed--since were running in -o32, the calling routing never saves 296 * the full 64 bits of a register across a function call. Being the 297 * interrupt handler, we're guaranteed that interrupts are disabled 298 * during this code so we don't have to worry about random interrupts 299 * blasting the high 32 bits. 300 */ 301 302 pending = read_c0_cause() & read_c0_status() & ST0_IM; 303 304 if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */ 305 do_IRQ(MIPS_CPU_IRQ_BASE + 7); 306 else if (pending & CAUSEF_IP4) 307 do_IRQ(K_INT_TIMER_0 + cpu); /* sb1250_timer_interrupt() */ 308 309 #ifdef CONFIG_SMP 310 else if (pending & CAUSEF_IP3) 311 sb1250_mailbox_interrupt(); 312 #endif 313 314 else if (pending & CAUSEF_IP2) 315 dispatch_ip2(); 316 else 317 spurious_interrupt(); 318 } 319