xref: /openbmc/linux/arch/mips/sibyte/sb1250/irq.c (revision 206a81c1)
1 /*
2  * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation
3  *
4  * This program is free software; you can redistribute it and/or
5  * modify it under the terms of the GNU General Public License
6  * as published by the Free Software Foundation; either version 2
7  * of the License, or (at your option) any later version.
8  *
9  * This program is distributed in the hope that it will be useful,
10  * but WITHOUT ANY WARRANTY; without even the implied warranty of
11  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
12  * GNU General Public License for more details.
13  *
14  * You should have received a copy of the GNU General Public License
15  * along with this program; if not, write to the Free Software
16  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
17  */
18 #include <linux/kernel.h>
19 #include <linux/init.h>
20 #include <linux/linkage.h>
21 #include <linux/interrupt.h>
22 #include <linux/spinlock.h>
23 #include <linux/smp.h>
24 #include <linux/mm.h>
25 #include <linux/kernel_stat.h>
26 
27 #include <asm/errno.h>
28 #include <asm/signal.h>
29 #include <asm/time.h>
30 #include <asm/io.h>
31 
32 #include <asm/sibyte/sb1250_regs.h>
33 #include <asm/sibyte/sb1250_int.h>
34 #include <asm/sibyte/sb1250_uart.h>
35 #include <asm/sibyte/sb1250_scd.h>
36 #include <asm/sibyte/sb1250.h>
37 
38 /*
39  * These are the routines that handle all the low level interrupt stuff.
40  * Actions handled here are: initialization of the interrupt map, requesting of
41  * interrupt lines by handlers, dispatching if interrupts to handlers, probing
42  * for interrupt lines
43  */
44 
45 #ifdef CONFIG_SIBYTE_HAS_LDT
46 extern unsigned long ldt_eoi_space;
47 #endif
48 
49 /* Store the CPU id (not the logical number) */
50 int sb1250_irq_owner[SB1250_NR_IRQS];
51 
52 static DEFINE_RAW_SPINLOCK(sb1250_imr_lock);
53 
54 void sb1250_mask_irq(int cpu, int irq)
55 {
56 	unsigned long flags;
57 	u64 cur_ints;
58 
59 	raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
60 	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
61 					R_IMR_INTERRUPT_MASK));
62 	cur_ints |= (((u64) 1) << irq);
63 	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
64 					R_IMR_INTERRUPT_MASK));
65 	raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
66 }
67 
68 void sb1250_unmask_irq(int cpu, int irq)
69 {
70 	unsigned long flags;
71 	u64 cur_ints;
72 
73 	raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
74 	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
75 					R_IMR_INTERRUPT_MASK));
76 	cur_ints &= ~(((u64) 1) << irq);
77 	____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
78 					R_IMR_INTERRUPT_MASK));
79 	raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
80 }
81 
82 #ifdef CONFIG_SMP
83 static int sb1250_set_affinity(struct irq_data *d, const struct cpumask *mask,
84 			       bool force)
85 {
86 	int i = 0, old_cpu, cpu, int_on;
87 	unsigned int irq = d->irq;
88 	u64 cur_ints;
89 	unsigned long flags;
90 
91 	i = cpumask_first_and(mask, cpu_online_mask);
92 
93 	/* Convert logical CPU to physical CPU */
94 	cpu = cpu_logical_map(i);
95 
96 	/* Protect against other affinity changers and IMR manipulation */
97 	raw_spin_lock_irqsave(&sb1250_imr_lock, flags);
98 
99 	/* Swizzle each CPU's IMR (but leave the IP selection alone) */
100 	old_cpu = sb1250_irq_owner[irq];
101 	cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(old_cpu) +
102 					R_IMR_INTERRUPT_MASK));
103 	int_on = !(cur_ints & (((u64) 1) << irq));
104 	if (int_on) {
105 		/* If it was on, mask it */
106 		cur_ints |= (((u64) 1) << irq);
107 		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(old_cpu) +
108 					R_IMR_INTERRUPT_MASK));
109 	}
110 	sb1250_irq_owner[irq] = cpu;
111 	if (int_on) {
112 		/* unmask for the new CPU */
113 		cur_ints = ____raw_readq(IOADDR(A_IMR_MAPPER(cpu) +
114 					R_IMR_INTERRUPT_MASK));
115 		cur_ints &= ~(((u64) 1) << irq);
116 		____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
117 					R_IMR_INTERRUPT_MASK));
118 	}
119 	raw_spin_unlock_irqrestore(&sb1250_imr_lock, flags);
120 
121 	return 0;
122 }
123 #endif
124 
125 static void disable_sb1250_irq(struct irq_data *d)
126 {
127 	unsigned int irq = d->irq;
128 
129 	sb1250_mask_irq(sb1250_irq_owner[irq], irq);
130 }
131 
132 static void enable_sb1250_irq(struct irq_data *d)
133 {
134 	unsigned int irq = d->irq;
135 
136 	sb1250_unmask_irq(sb1250_irq_owner[irq], irq);
137 }
138 
139 
140 static void ack_sb1250_irq(struct irq_data *d)
141 {
142 	unsigned int irq = d->irq;
143 #ifdef CONFIG_SIBYTE_HAS_LDT
144 	u64 pending;
145 
146 	/*
147 	 * If the interrupt was an HT interrupt, now is the time to
148 	 * clear it.  NOTE: we assume the HT bridge was set up to
149 	 * deliver the interrupts to all CPUs (which makes affinity
150 	 * changing easier for us)
151 	 */
152 	pending = __raw_readq(IOADDR(A_IMR_REGISTER(sb1250_irq_owner[irq],
153 						    R_IMR_LDT_INTERRUPT)));
154 	pending &= ((u64)1 << (irq));
155 	if (pending) {
156 		int i;
157 		for (i=0; i<NR_CPUS; i++) {
158 			int cpu;
159 #ifdef CONFIG_SMP
160 			cpu = cpu_logical_map(i);
161 #else
162 			cpu = i;
163 #endif
164 			/*
165 			 * Clear for all CPUs so an affinity switch
166 			 * doesn't find an old status
167 			 */
168 			__raw_writeq(pending,
169 				     IOADDR(A_IMR_REGISTER(cpu,
170 						R_IMR_LDT_INTERRUPT_CLR)));
171 		}
172 
173 		/*
174 		 * Generate EOI.  For Pass 1 parts, EOI is a nop.  For
175 		 * Pass 2, the LDT world may be edge-triggered, but
176 		 * this EOI shouldn't hurt.  If they are
177 		 * level-sensitive, the EOI is required.
178 		 */
179 		*(uint32_t *)(ldt_eoi_space+(irq<<16)+(7<<2)) = 0;
180 	}
181 #endif
182 	sb1250_mask_irq(sb1250_irq_owner[irq], irq);
183 }
184 
185 static struct irq_chip sb1250_irq_type = {
186 	.name = "SB1250-IMR",
187 	.irq_mask_ack = ack_sb1250_irq,
188 	.irq_unmask = enable_sb1250_irq,
189 	.irq_mask = disable_sb1250_irq,
190 #ifdef CONFIG_SMP
191 	.irq_set_affinity = sb1250_set_affinity
192 #endif
193 };
194 
195 void __init init_sb1250_irqs(void)
196 {
197 	int i;
198 
199 	for (i = 0; i < SB1250_NR_IRQS; i++) {
200 		irq_set_chip_and_handler(i, &sb1250_irq_type,
201 					 handle_level_irq);
202 		sb1250_irq_owner[i] = 0;
203 	}
204 }
205 
206 
207 /*
208  *  arch_init_irq is called early in the boot sequence from init/main.c via
209  *  init_IRQ.  It is responsible for setting up the interrupt mapper and
210  *  installing the handler that will be responsible for dispatching interrupts
211  *  to the "right" place.
212  */
213 /*
214  * For now, map all interrupts to IP[2].  We could save
215  * some cycles by parceling out system interrupts to different
216  * IP lines, but keep it simple for bringup.  We'll also direct
217  * all interrupts to a single CPU; we should probably route
218  * PCI and LDT to one cpu and everything else to the other
219  * to balance the load a bit.
220  *
221  * On the second cpu, everything is set to IP5, which is
222  * ignored, EXCEPT the mailbox interrupt.  That one is
223  * set to IP[2] so it is handled.  This is needed so we
224  * can do cross-cpu function calls, as required by SMP
225  */
226 
227 #define IMR_IP2_VAL	K_INT_MAP_I0
228 #define IMR_IP3_VAL	K_INT_MAP_I1
229 #define IMR_IP4_VAL	K_INT_MAP_I2
230 #define IMR_IP5_VAL	K_INT_MAP_I3
231 #define IMR_IP6_VAL	K_INT_MAP_I4
232 
233 void __init arch_init_irq(void)
234 {
235 
236 	unsigned int i;
237 	u64 tmp;
238 	unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 |
239 		STATUSF_IP1 | STATUSF_IP0;
240 
241 	/* Default everything to IP2 */
242 	for (i = 0; i < SB1250_NR_IRQS; i++) {	/* was I0 */
243 		__raw_writeq(IMR_IP2_VAL,
244 			     IOADDR(A_IMR_REGISTER(0,
245 						   R_IMR_INTERRUPT_MAP_BASE) +
246 				    (i << 3)));
247 		__raw_writeq(IMR_IP2_VAL,
248 			     IOADDR(A_IMR_REGISTER(1,
249 						   R_IMR_INTERRUPT_MAP_BASE) +
250 				    (i << 3)));
251 	}
252 
253 	init_sb1250_irqs();
254 
255 	/*
256 	 * Map the high 16 bits of the mailbox registers to IP[3], for
257 	 * inter-cpu messages
258 	 */
259 	/* Was I1 */
260 	__raw_writeq(IMR_IP3_VAL,
261 		     IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) +
262 			    (K_INT_MBOX_0 << 3)));
263 	__raw_writeq(IMR_IP3_VAL,
264 		     IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MAP_BASE) +
265 			    (K_INT_MBOX_0 << 3)));
266 
267 	/* Clear the mailboxes.	 The firmware may leave them dirty */
268 	__raw_writeq(0xffffffffffffffffULL,
269 		     IOADDR(A_IMR_REGISTER(0, R_IMR_MAILBOX_CLR_CPU)));
270 	__raw_writeq(0xffffffffffffffffULL,
271 		     IOADDR(A_IMR_REGISTER(1, R_IMR_MAILBOX_CLR_CPU)));
272 
273 	/* Mask everything except the mailbox registers for both cpus */
274 	tmp = ~((u64) 0) ^ (((u64) 1) << K_INT_MBOX_0);
275 	__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MASK)));
276 	__raw_writeq(tmp, IOADDR(A_IMR_REGISTER(1, R_IMR_INTERRUPT_MASK)));
277 
278 	/*
279 	 * Note that the timer interrupts are also mapped, but this is
280 	 * done in sb1250_time_init().	Also, the profiling driver
281 	 * does its own management of IP7.
282 	 */
283 
284 	/* Enable necessary IPs, disable the rest */
285 	change_c0_status(ST0_IM, imask);
286 }
287 
288 extern void sb1250_mailbox_interrupt(void);
289 
290 static inline void dispatch_ip2(void)
291 {
292 	unsigned int cpu = smp_processor_id();
293 	unsigned long long mask;
294 
295 	/*
296 	 * Default...we've hit an IP[2] interrupt, which means we've got to
297 	 * check the 1250 interrupt registers to figure out what to do.	 Need
298 	 * to detect which CPU we're on, now that smp_affinity is supported.
299 	 */
300 	mask = __raw_readq(IOADDR(A_IMR_REGISTER(cpu,
301 				  R_IMR_INTERRUPT_STATUS_BASE)));
302 	if (mask)
303 		do_IRQ(fls64(mask) - 1);
304 }
305 
306 asmlinkage void plat_irq_dispatch(void)
307 {
308 	unsigned int cpu = smp_processor_id();
309 	unsigned int pending;
310 
311 	/*
312 	 * What a pain. We have to be really careful saving the upper 32 bits
313 	 * of any * register across function calls if we don't want them
314 	 * trashed--since were running in -o32, the calling routing never saves
315 	 * the full 64 bits of a register across a function call.  Being the
316 	 * interrupt handler, we're guaranteed that interrupts are disabled
317 	 * during this code so we don't have to worry about random interrupts
318 	 * blasting the high 32 bits.
319 	 */
320 
321 	pending = read_c0_cause() & read_c0_status() & ST0_IM;
322 
323 	if (pending & CAUSEF_IP7) /* CPU performance counter interrupt */
324 		do_IRQ(MIPS_CPU_IRQ_BASE + 7);
325 	else if (pending & CAUSEF_IP4)
326 		do_IRQ(K_INT_TIMER_0 + cpu);	/* sb1250_timer_interrupt() */
327 
328 #ifdef CONFIG_SMP
329 	else if (pending & CAUSEF_IP3)
330 		sb1250_mailbox_interrupt();
331 #endif
332 
333 	else if (pending & CAUSEF_IP2)
334 		dispatch_ip2();
335 	else
336 		spurious_interrupt();
337 }
338