1 /* 2 * This program is free software; you can redistribute it and/or 3 * modify it under the terms of the GNU General Public License 4 * as published by the Free Software Foundation; either version 2 5 * of the License, or (at your option) any later version. 6 * 7 * This program is distributed in the hope that it will be useful, 8 * but WITHOUT ANY WARRANTY; without even the implied warranty of 9 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 10 * GNU General Public License for more details. 11 * 12 * You should have received a copy of the GNU General Public License 13 * along with this program; if not, write to the Free Software 14 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 15 * 16 * Copyright (C) 2001, 2002, 2003 Broadcom Corporation 17 * Copyright (C) 2007 Ralf Baechle <ralf@linux-mips.org> 18 * Copyright (C) 2007 MIPS Technologies, Inc. 19 * written by Ralf Baechle <ralf@linux-mips.org> 20 */ 21 22 #undef DEBUG 23 24 #include <linux/device.h> 25 #include <linux/module.h> 26 #include <linux/kernel.h> 27 #include <linux/types.h> 28 #include <linux/init.h> 29 #include <linux/interrupt.h> 30 #include <linux/slab.h> 31 #include <linux/smp_lock.h> 32 #include <linux/vmalloc.h> 33 #include <linux/fs.h> 34 #include <linux/errno.h> 35 #include <linux/wait.h> 36 #include <asm/io.h> 37 #include <asm/sibyte/sb1250.h> 38 39 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 40 #include <asm/sibyte/bcm1480_regs.h> 41 #include <asm/sibyte/bcm1480_scd.h> 42 #include <asm/sibyte/bcm1480_int.h> 43 #elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) 44 #include <asm/sibyte/sb1250_regs.h> 45 #include <asm/sibyte/sb1250_scd.h> 46 #include <asm/sibyte/sb1250_int.h> 47 #else 48 #error invalid SiByte UART configuation 49 #endif 50 51 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 52 #undef K_INT_TRACE_FREEZE 53 #define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE 54 #undef K_INT_PERF_CNT 55 #define K_INT_PERF_CNT K_BCM1480_INT_PERF_CNT 56 #endif 57 58 #include <asm/system.h> 59 #include <asm/uaccess.h> 60 61 #define SBPROF_TB_MAJOR 240 62 63 typedef u64 tb_sample_t[6*256]; 64 65 enum open_status { 66 SB_CLOSED, 67 SB_OPENING, 68 SB_OPEN 69 }; 70 71 struct sbprof_tb { 72 wait_queue_head_t tb_sync; 73 wait_queue_head_t tb_read; 74 struct mutex lock; 75 enum open_status open; 76 tb_sample_t *sbprof_tbbuf; 77 int next_tb_sample; 78 79 volatile int tb_enable; 80 volatile int tb_armed; 81 82 }; 83 84 static struct sbprof_tb sbp; 85 86 #define MAX_SAMPLE_BYTES (24*1024*1024) 87 #define MAX_TBSAMPLE_BYTES (12*1024*1024) 88 89 #define MAX_SAMPLES (MAX_SAMPLE_BYTES/sizeof(u_int32_t)) 90 #define TB_SAMPLE_SIZE (sizeof(tb_sample_t)) 91 #define MAX_TB_SAMPLES (MAX_TBSAMPLE_BYTES/TB_SAMPLE_SIZE) 92 93 /* ioctls */ 94 #define SBPROF_ZBSTART _IOW('s', 0, int) 95 #define SBPROF_ZBSTOP _IOW('s', 1, int) 96 #define SBPROF_ZBWAITFULL _IOW('s', 2, int) 97 98 /* 99 * Routines for using 40-bit SCD cycle counter 100 * 101 * Client responsible for either handling interrupts or making sure 102 * the cycles counter never saturates, e.g., by doing 103 * zclk_timer_init(0) at least every 2^40 - 1 ZCLKs. 104 */ 105 106 /* 107 * Configures SCD counter 0 to count ZCLKs starting from val; 108 * Configures SCD counters1,2,3 to count nothing. 109 * Must not be called while gathering ZBbus profiles. 110 */ 111 112 #define zclk_timer_init(val) \ 113 __asm__ __volatile__ (".set push;" \ 114 ".set mips64;" \ 115 "la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \ 116 "sd %0, 0x10($8);" /* write val to counter0 */ \ 117 "sd %1, 0($8);" /* config counter0 for zclks*/ \ 118 ".set pop" \ 119 : /* no outputs */ \ 120 /* enable, counter0 */ \ 121 : /* inputs */ "r"(val), "r" ((1ULL << 33) | 1ULL) \ 122 : /* modifies */ "$8" ) 123 124 125 /* Reads SCD counter 0 and puts result in value 126 unsigned long long val; */ 127 #define zclk_get(val) \ 128 __asm__ __volatile__ (".set push;" \ 129 ".set mips64;" \ 130 "la $8, 0xb00204c0;" /* SCD perf_cnt_cfg */ \ 131 "ld %0, 0x10($8);" /* write val to counter0 */ \ 132 ".set pop" \ 133 : /* outputs */ "=r"(val) \ 134 : /* inputs */ \ 135 : /* modifies */ "$8" ) 136 137 #define DEVNAME "sb_tbprof" 138 139 #define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES) 140 141 /* 142 * Support for ZBbus sampling using the trace buffer 143 * 144 * We use the SCD performance counter interrupt, caused by a Zclk counter 145 * overflow, to trigger the start of tracing. 146 * 147 * We set the trace buffer to sample everything and freeze on 148 * overflow. 149 * 150 * We map the interrupt for trace_buffer_freeze to handle it on CPU 0. 151 * 152 */ 153 154 static u64 tb_period; 155 156 static void arm_tb(void) 157 { 158 u64 scdperfcnt; 159 u64 next = (1ULL << 40) - tb_period; 160 u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL; 161 162 /* 163 * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to 164 * trigger start of trace. XXX vary sampling period 165 */ 166 __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1)); 167 scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); 168 169 /* 170 * Unfortunately, in Pass 2 we must clear all counters to knock down 171 * a previous interrupt request. This means that bus profiling 172 * requires ALL of the SCD perf counters. 173 */ 174 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 175 __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | 176 /* keep counters 0,2,3,4,5,6,7 as is */ 177 V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */ 178 IOADDR(A_BCM1480_SCD_PERF_CNT_CFG0)); 179 __raw_writeq( 180 M_SPC_CFG_ENABLE | /* enable counting */ 181 M_SPC_CFG_CLEAR | /* clear all counters */ 182 V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */ 183 IOADDR(A_BCM1480_SCD_PERF_CNT_CFG1)); 184 #else 185 __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | 186 /* keep counters 0,2,3 as is */ 187 M_SPC_CFG_ENABLE | /* enable counting */ 188 M_SPC_CFG_CLEAR | /* clear all counters */ 189 V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */ 190 IOADDR(A_SCD_PERF_CNT_CFG)); 191 #endif 192 __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1)); 193 /* Reset the trace buffer */ 194 __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); 195 #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT) 196 /* XXXKW may want to expose control to the data-collector */ 197 tb_options |= M_SCD_TRACE_CFG_FORCECNT; 198 #endif 199 __raw_writeq(tb_options, IOADDR(A_SCD_TRACE_CFG)); 200 sbp.tb_armed = 1; 201 } 202 203 static irqreturn_t sbprof_tb_intr(int irq, void *dev_id) 204 { 205 int i; 206 207 pr_debug(DEVNAME ": tb_intr\n"); 208 209 if (sbp.next_tb_sample < MAX_TB_SAMPLES) { 210 /* XXX should use XKPHYS to make writes bypass L2 */ 211 u64 *p = sbp.sbprof_tbbuf[sbp.next_tb_sample++]; 212 /* Read out trace */ 213 __raw_writeq(M_SCD_TRACE_CFG_START_READ, 214 IOADDR(A_SCD_TRACE_CFG)); 215 __asm__ __volatile__ ("sync" : : : "memory"); 216 /* Loop runs backwards because bundles are read out in reverse order */ 217 for (i = 256 * 6; i > 0; i -= 6) { 218 /* Subscripts decrease to put bundle in the order */ 219 /* t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */ 220 p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); 221 /* read t2 hi */ 222 p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); 223 /* read t2 lo */ 224 p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); 225 /* read t1 hi */ 226 p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); 227 /* read t1 lo */ 228 p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); 229 /* read t0 hi */ 230 p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); 231 /* read t0 lo */ 232 } 233 if (!sbp.tb_enable) { 234 pr_debug(DEVNAME ": tb_intr shutdown\n"); 235 __raw_writeq(M_SCD_TRACE_CFG_RESET, 236 IOADDR(A_SCD_TRACE_CFG)); 237 sbp.tb_armed = 0; 238 wake_up_interruptible(&sbp.tb_sync); 239 } else { 240 /* knock down current interrupt and get another one later */ 241 arm_tb(); 242 } 243 } else { 244 /* No more trace buffer samples */ 245 pr_debug(DEVNAME ": tb_intr full\n"); 246 __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); 247 sbp.tb_armed = 0; 248 if (!sbp.tb_enable) 249 wake_up_interruptible(&sbp.tb_sync); 250 wake_up_interruptible(&sbp.tb_read); 251 } 252 return IRQ_HANDLED; 253 } 254 255 static irqreturn_t sbprof_pc_intr(int irq, void *dev_id) 256 { 257 printk(DEVNAME ": unexpected pc_intr"); 258 return IRQ_NONE; 259 } 260 261 /* 262 * Requires: Already called zclk_timer_init with a value that won't 263 * saturate 40 bits. No subsequent use of SCD performance counters 264 * or trace buffer. 265 */ 266 267 static int sbprof_zbprof_start(struct file *filp) 268 { 269 u64 scdperfcnt; 270 int err; 271 272 if (xchg(&sbp.tb_enable, 1)) 273 return -EBUSY; 274 275 pr_debug(DEVNAME ": starting\n"); 276 277 sbp.next_tb_sample = 0; 278 filp->f_pos = 0; 279 280 err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, 281 DEVNAME " trace freeze", &sbp); 282 if (err) 283 return -EBUSY; 284 285 /* Make sure there isn't a perf-cnt interrupt waiting */ 286 scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); 287 /* Disable and clear counters, override SRC_1 */ 288 __raw_writeq((scdperfcnt & ~(M_SPC_CFG_SRC1 | M_SPC_CFG_ENABLE)) | 289 M_SPC_CFG_ENABLE | M_SPC_CFG_CLEAR | V_SPC_CFG_SRC1(1), 290 IOADDR(A_SCD_PERF_CNT_CFG)); 291 292 /* 293 * We grab this interrupt to prevent others from trying to use 294 * it, even though we don't want to service the interrupts 295 * (they only feed into the trace-on-interrupt mechanism) 296 */ 297 if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) { 298 free_irq(K_INT_TRACE_FREEZE, &sbp); 299 return -EBUSY; 300 } 301 302 /* 303 * I need the core to mask these, but the interrupt mapper to 304 * pass them through. I am exploiting my knowledge that 305 * cp0_status masks out IP[5]. krw 306 */ 307 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 308 __raw_writeq(K_BCM1480_INT_MAP_I3, 309 IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + 310 ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3))); 311 #else 312 __raw_writeq(K_INT_MAP_I3, 313 IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + 314 (K_INT_PERF_CNT << 3))); 315 #endif 316 317 /* Initialize address traps */ 318 __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0)); 319 __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_1)); 320 __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_2)); 321 __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_3)); 322 323 __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_0)); 324 __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_1)); 325 __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_2)); 326 __raw_writeq(0, IOADDR(A_ADDR_TRAP_DOWN_3)); 327 328 __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_0)); 329 __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_1)); 330 __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_2)); 331 __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); 332 333 /* Initialize Trace Event 0-7 */ 334 /* when interrupt */ 335 __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); 336 __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); 337 __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); 338 __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_3)); 339 __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_4)); 340 __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_5)); 341 __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_6)); 342 __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_7)); 343 344 /* Initialize Trace Sequence 0-7 */ 345 /* Start on event 0 (interrupt) */ 346 __raw_writeq(V_SCD_TRSEQ_FUNC_START | 0x0fff, 347 IOADDR(A_SCD_TRACE_SEQUENCE_0)); 348 /* dsamp when d used | asamp when a used */ 349 __raw_writeq(M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | 350 K_SCD_TRSEQ_TRIGGER_ALL, 351 IOADDR(A_SCD_TRACE_SEQUENCE_1)); 352 __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_2)); 353 __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_3)); 354 __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_4)); 355 __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_5)); 356 __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_6)); 357 __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); 358 359 /* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */ 360 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 361 __raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f), 362 IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L))); 363 #else 364 __raw_writeq(1ULL << K_INT_PERF_CNT, 365 IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE))); 366 #endif 367 arm_tb(); 368 369 pr_debug(DEVNAME ": done starting\n"); 370 371 return 0; 372 } 373 374 static int sbprof_zbprof_stop(void) 375 { 376 int err = 0; 377 378 pr_debug(DEVNAME ": stopping\n"); 379 380 if (sbp.tb_enable) { 381 /* 382 * XXXKW there is a window here where the intr handler may run, 383 * see the disable, and do the wake_up before this sleep 384 * happens. 385 */ 386 pr_debug(DEVNAME ": wait for disarm\n"); 387 err = wait_event_interruptible(sbp.tb_sync, !sbp.tb_armed); 388 pr_debug(DEVNAME ": disarm complete, stat %d\n", err); 389 390 if (err) 391 return err; 392 393 sbp.tb_enable = 0; 394 free_irq(K_INT_TRACE_FREEZE, &sbp); 395 free_irq(K_INT_PERF_CNT, &sbp); 396 } 397 398 pr_debug(DEVNAME ": done stopping\n"); 399 400 return err; 401 } 402 403 static int sbprof_tb_open(struct inode *inode, struct file *filp) 404 { 405 int minor; 406 int err = 0; 407 408 lock_kernel(); 409 minor = iminor(inode); 410 if (minor != 0) { 411 err = -ENODEV; 412 goto out; 413 } 414 415 if (xchg(&sbp.open, SB_OPENING) != SB_CLOSED) { 416 err = -EBUSY; 417 goto out; 418 } 419 420 memset(&sbp, 0, sizeof(struct sbprof_tb)); 421 sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES); 422 if (!sbp.sbprof_tbbuf) { 423 err = -ENOMEM; 424 goto out; 425 } 426 memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES); 427 init_waitqueue_head(&sbp.tb_sync); 428 init_waitqueue_head(&sbp.tb_read); 429 mutex_init(&sbp.lock); 430 431 sbp.open = SB_OPEN; 432 433 out: 434 unlock_kernel(); 435 return err; 436 } 437 438 static int sbprof_tb_release(struct inode *inode, struct file *filp) 439 { 440 int minor; 441 442 minor = iminor(inode); 443 if (minor != 0 || !sbp.open) 444 return -ENODEV; 445 446 mutex_lock(&sbp.lock); 447 448 if (sbp.tb_armed || sbp.tb_enable) 449 sbprof_zbprof_stop(); 450 451 vfree(sbp.sbprof_tbbuf); 452 sbp.open = 0; 453 454 mutex_unlock(&sbp.lock); 455 456 return 0; 457 } 458 459 static ssize_t sbprof_tb_read(struct file *filp, char *buf, 460 size_t size, loff_t *offp) 461 { 462 int cur_sample, sample_off, cur_count, sample_left; 463 char *src; 464 int count = 0; 465 char *dest = buf; 466 long cur_off = *offp; 467 468 if (!access_ok(VERIFY_WRITE, buf, size)) 469 return -EFAULT; 470 471 mutex_lock(&sbp.lock); 472 473 count = 0; 474 cur_sample = cur_off / TB_SAMPLE_SIZE; 475 sample_off = cur_off % TB_SAMPLE_SIZE; 476 sample_left = TB_SAMPLE_SIZE - sample_off; 477 478 while (size && (cur_sample < sbp.next_tb_sample)) { 479 int err; 480 481 cur_count = size < sample_left ? size : sample_left; 482 src = (char *)(((long)sbp.sbprof_tbbuf[cur_sample])+sample_off); 483 err = __copy_to_user(dest, src, cur_count); 484 if (err) { 485 *offp = cur_off + cur_count - err; 486 mutex_unlock(&sbp.lock); 487 return err; 488 } 489 pr_debug(DEVNAME ": read from sample %d, %d bytes\n", 490 cur_sample, cur_count); 491 size -= cur_count; 492 sample_left -= cur_count; 493 if (!sample_left) { 494 cur_sample++; 495 sample_off = 0; 496 sample_left = TB_SAMPLE_SIZE; 497 } else { 498 sample_off += cur_count; 499 } 500 cur_off += cur_count; 501 dest += cur_count; 502 count += cur_count; 503 } 504 *offp = cur_off; 505 mutex_unlock(&sbp.lock); 506 507 return count; 508 } 509 510 static long sbprof_tb_ioctl(struct file *filp, 511 unsigned int command, 512 unsigned long arg) 513 { 514 int err = 0; 515 516 switch (command) { 517 case SBPROF_ZBSTART: 518 mutex_lock(&sbp.lock); 519 err = sbprof_zbprof_start(filp); 520 mutex_unlock(&sbp.lock); 521 break; 522 523 case SBPROF_ZBSTOP: 524 mutex_lock(&sbp.lock); 525 err = sbprof_zbprof_stop(); 526 mutex_unlock(&sbp.lock); 527 break; 528 529 case SBPROF_ZBWAITFULL: { 530 err = wait_event_interruptible(sbp.tb_read, TB_FULL); 531 if (err) 532 break; 533 534 err = put_user(TB_FULL, (int *) arg); 535 break; 536 } 537 538 default: 539 err = -EINVAL; 540 break; 541 } 542 543 return err; 544 } 545 546 static const struct file_operations sbprof_tb_fops = { 547 .owner = THIS_MODULE, 548 .open = sbprof_tb_open, 549 .release = sbprof_tb_release, 550 .read = sbprof_tb_read, 551 .unlocked_ioctl = sbprof_tb_ioctl, 552 .compat_ioctl = sbprof_tb_ioctl, 553 .mmap = NULL, 554 }; 555 556 static struct class *tb_class; 557 static struct device *tb_dev; 558 559 static int __init sbprof_tb_init(void) 560 { 561 struct device *dev; 562 struct class *tbc; 563 int err; 564 565 if (register_chrdev(SBPROF_TB_MAJOR, DEVNAME, &sbprof_tb_fops)) { 566 printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n", 567 SBPROF_TB_MAJOR); 568 return -EIO; 569 } 570 571 tbc = class_create(THIS_MODULE, "sb_tracebuffer"); 572 if (IS_ERR(tbc)) { 573 err = PTR_ERR(tbc); 574 goto out_chrdev; 575 } 576 577 tb_class = tbc; 578 579 dev = device_create_drvdata(tbc, NULL, MKDEV(SBPROF_TB_MAJOR, 0), 580 NULL, "tb"); 581 if (IS_ERR(dev)) { 582 err = PTR_ERR(dev); 583 goto out_class; 584 } 585 tb_dev = dev; 586 587 sbp.open = 0; 588 tb_period = zbbus_mhz * 10000LL; 589 pr_info(DEVNAME ": initialized - tb_period = %lld\n", 590 (long long) tb_period); 591 return 0; 592 593 out_class: 594 class_destroy(tb_class); 595 out_chrdev: 596 unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME); 597 598 return err; 599 } 600 601 static void __exit sbprof_tb_cleanup(void) 602 { 603 device_destroy(tb_class, MKDEV(SBPROF_TB_MAJOR, 0)); 604 unregister_chrdev(SBPROF_TB_MAJOR, DEVNAME); 605 class_destroy(tb_class); 606 } 607 608 module_init(sbprof_tb_init); 609 module_exit(sbprof_tb_cleanup); 610 611 MODULE_ALIAS_CHARDEV_MAJOR(SBPROF_TB_MAJOR); 612 MODULE_AUTHOR("Ralf Baechle <ralf@linux-mips.org>"); 613 MODULE_LICENSE("GPL"); 614