1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation 4 */ 5 6 #include <linux/init.h> 7 #include <linux/kernel.h> 8 #include <linux/linkage.h> 9 #include <linux/mm.h> 10 #include <linux/blkdev.h> 11 #include <linux/memblock.h> 12 #include <linux/pm.h> 13 #include <linux/smp.h> 14 15 #include <asm/bootinfo.h> 16 #include <asm/reboot.h> 17 #include <asm/setup.h> 18 #include <asm/sibyte/board.h> 19 #include <asm/smp-ops.h> 20 21 #include <asm/fw/cfe/cfe_api.h> 22 #include <asm/fw/cfe/cfe_error.h> 23 24 /* Max ram addressable in 32-bit segments */ 25 #ifdef CONFIG_64BIT 26 #define MAX_RAM_SIZE (~0ULL) 27 #else 28 #ifdef CONFIG_HIGHMEM 29 #ifdef CONFIG_PHYS_ADDR_T_64BIT 30 #define MAX_RAM_SIZE (~0ULL) 31 #else 32 #define MAX_RAM_SIZE (0xffffffffULL) 33 #endif 34 #else 35 #define MAX_RAM_SIZE (0x1fffffffULL) 36 #endif 37 #endif 38 39 #define SIBYTE_MAX_MEM_REGIONS 8 40 phys_addr_t board_mem_region_addrs[SIBYTE_MAX_MEM_REGIONS]; 41 phys_addr_t board_mem_region_sizes[SIBYTE_MAX_MEM_REGIONS]; 42 unsigned int board_mem_region_count; 43 44 int cfe_cons_handle; 45 46 #ifdef CONFIG_BLK_DEV_INITRD 47 extern unsigned long initrd_start, initrd_end; 48 #endif 49 50 static void __noreturn cfe_linux_exit(void *arg) 51 { 52 int warm = *(int *)arg; 53 54 if (smp_processor_id()) { 55 static int reboot_smp; 56 57 /* Don't repeat the process from another CPU */ 58 if (!reboot_smp) { 59 /* Get CPU 0 to do the cfe_exit */ 60 reboot_smp = 1; 61 smp_call_function(cfe_linux_exit, arg, 0); 62 } 63 } else { 64 printk("Passing control back to CFE...\n"); 65 cfe_exit(warm, 0); 66 printk("cfe_exit returned??\n"); 67 } 68 while (1); 69 } 70 71 static void __noreturn cfe_linux_restart(char *command) 72 { 73 static const int zero; 74 75 cfe_linux_exit((void *)&zero); 76 } 77 78 static void __noreturn cfe_linux_halt(void) 79 { 80 static const int one = 1; 81 82 cfe_linux_exit((void *)&one); 83 } 84 85 static __init void prom_meminit(void) 86 { 87 u64 addr, size, type; /* regardless of PHYS_ADDR_T_64BIT */ 88 int mem_flags = 0; 89 unsigned int idx; 90 int rd_flag; 91 #ifdef CONFIG_BLK_DEV_INITRD 92 unsigned long initrd_pstart; 93 unsigned long initrd_pend; 94 95 initrd_pstart = CPHYSADDR(initrd_start); 96 initrd_pend = CPHYSADDR(initrd_end); 97 if (initrd_start && 98 ((initrd_pstart > MAX_RAM_SIZE) 99 || (initrd_pend > MAX_RAM_SIZE))) { 100 panic("initrd out of addressable memory"); 101 } 102 103 #endif /* INITRD */ 104 105 for (idx = 0; cfe_enummem(idx, mem_flags, &addr, &size, &type) != CFE_ERR_NOMORE; 106 idx++) { 107 rd_flag = 0; 108 if (type == CFE_MI_AVAILABLE) { 109 /* 110 * See if this block contains (any portion of) the 111 * ramdisk 112 */ 113 #ifdef CONFIG_BLK_DEV_INITRD 114 if (initrd_start) { 115 if ((initrd_pstart > addr) && 116 (initrd_pstart < (addr + size))) { 117 memblock_add(addr, 118 initrd_pstart - addr); 119 rd_flag = 1; 120 } 121 if ((initrd_pend > addr) && 122 (initrd_pend < (addr + size))) { 123 memblock_add(initrd_pend, 124 (addr + size) - initrd_pend); 125 rd_flag = 1; 126 } 127 } 128 #endif 129 if (!rd_flag) { 130 if (addr > MAX_RAM_SIZE) 131 continue; 132 if (addr+size > MAX_RAM_SIZE) 133 size = MAX_RAM_SIZE - (addr+size) + 1; 134 /* 135 * memcpy/__copy_user prefetch, which 136 * will cause a bus error for 137 * KSEG/KUSEG addrs not backed by RAM. 138 * Hence, reserve some padding for the 139 * prefetch distance. 140 */ 141 if (size > 512) 142 size -= 512; 143 memblock_add(addr, size); 144 } 145 board_mem_region_addrs[board_mem_region_count] = addr; 146 board_mem_region_sizes[board_mem_region_count] = size; 147 board_mem_region_count++; 148 if (board_mem_region_count == 149 SIBYTE_MAX_MEM_REGIONS) { 150 /* 151 * Too many regions. Need to configure more 152 */ 153 while(1); 154 } 155 } 156 } 157 #ifdef CONFIG_BLK_DEV_INITRD 158 if (initrd_start) { 159 memblock_add(initrd_pstart, initrd_pend - initrd_pstart); 160 memblock_reserve(initrd_pstart, initrd_pend - initrd_pstart); 161 } 162 #endif 163 } 164 165 #ifdef CONFIG_BLK_DEV_INITRD 166 static int __init initrd_setup(char *str) 167 { 168 char rdarg[64]; 169 int idx; 170 char *tmp, *endptr; 171 unsigned long initrd_size; 172 173 /* Make a copy of the initrd argument so we can smash it up here */ 174 for (idx = 0; idx < sizeof(rdarg)-1; idx++) { 175 if (!str[idx] || (str[idx] == ' ')) break; 176 rdarg[idx] = str[idx]; 177 } 178 179 rdarg[idx] = 0; 180 str = rdarg; 181 182 /* 183 *Initrd location comes in the form "<hex size of ramdisk in bytes>@<location in memory>" 184 * e.g. initrd=3abfd@80010000. This is set up by the loader. 185 */ 186 for (tmp = str; *tmp != '@'; tmp++) { 187 if (!*tmp) { 188 goto fail; 189 } 190 } 191 *tmp = 0; 192 tmp++; 193 if (!*tmp) { 194 goto fail; 195 } 196 initrd_size = simple_strtoul(str, &endptr, 16); 197 if (*endptr) { 198 *(tmp-1) = '@'; 199 goto fail; 200 } 201 *(tmp-1) = '@'; 202 initrd_start = simple_strtoul(tmp, &endptr, 16); 203 if (*endptr) { 204 goto fail; 205 } 206 initrd_end = initrd_start + initrd_size; 207 printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start); 208 return 1; 209 fail: 210 printk("Bad initrd argument. Disabling initrd\n"); 211 initrd_start = 0; 212 initrd_end = 0; 213 return 1; 214 } 215 216 #endif 217 218 extern const struct plat_smp_ops sb_smp_ops; 219 extern const struct plat_smp_ops bcm1480_smp_ops; 220 221 /* 222 * prom_init is called just after the cpu type is determined, from setup_arch() 223 */ 224 void __init prom_init(void) 225 { 226 uint64_t cfe_ept, cfe_handle; 227 unsigned int cfe_eptseal; 228 int argc = fw_arg0; 229 char **envp = (char **) fw_arg2; 230 int *prom_vec = (int *) fw_arg3; 231 232 _machine_restart = cfe_linux_restart; 233 _machine_halt = cfe_linux_halt; 234 pm_power_off = cfe_linux_halt; 235 236 /* 237 * Check if a loader was used; if NOT, the 4 arguments are 238 * what CFE gives us (handle, 0, EPT and EPTSEAL) 239 */ 240 if (argc < 0) { 241 cfe_handle = (uint64_t)(long)argc; 242 cfe_ept = (long)envp; 243 cfe_eptseal = (uint32_t)(unsigned long)prom_vec; 244 } else { 245 if ((int32_t)(long)prom_vec < 0) { 246 /* 247 * Old loader; all it gives us is the handle, 248 * so use the "known" entrypoint and assume 249 * the seal. 250 */ 251 cfe_handle = (uint64_t)(long)prom_vec; 252 cfe_ept = (uint64_t)((int32_t)0x9fc00500); 253 cfe_eptseal = CFE_EPTSEAL; 254 } else { 255 /* 256 * Newer loaders bundle the handle/ept/eptseal 257 * Note: prom_vec is in the loader's useg 258 * which is still alive in the TLB. 259 */ 260 cfe_handle = (uint64_t)((int32_t *)prom_vec)[0]; 261 cfe_ept = (uint64_t)((int32_t *)prom_vec)[2]; 262 cfe_eptseal = (unsigned int)((uint32_t *)prom_vec)[3]; 263 } 264 } 265 if (cfe_eptseal != CFE_EPTSEAL) { 266 /* too early for panic to do any good */ 267 printk("CFE's entrypoint seal doesn't match. Spinning."); 268 while (1) ; 269 } 270 cfe_init(cfe_handle, cfe_ept); 271 /* 272 * Get the handle for (at least) prom_putchar, possibly for 273 * boot console 274 */ 275 cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE); 276 if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, COMMAND_LINE_SIZE) < 0) { 277 if (argc >= 0) { 278 /* The loader should have set the command line */ 279 /* too early for panic to do any good */ 280 printk("LINUX_CMDLINE not defined in cfe."); 281 while (1) ; 282 } 283 } 284 285 #ifdef CONFIG_BLK_DEV_INITRD 286 { 287 char *ptr; 288 /* Need to find out early whether we've got an initrd. So scan 289 the list looking now */ 290 for (ptr = arcs_cmdline; *ptr; ptr++) { 291 while (*ptr == ' ') { 292 ptr++; 293 } 294 if (!strncmp(ptr, "initrd=", 7)) { 295 initrd_setup(ptr+7); 296 break; 297 } else { 298 while (*ptr && (*ptr != ' ')) { 299 ptr++; 300 } 301 } 302 } 303 } 304 #endif /* CONFIG_BLK_DEV_INITRD */ 305 306 /* Not sure this is needed, but it's the safe way. */ 307 arcs_cmdline[COMMAND_LINE_SIZE-1] = 0; 308 309 prom_meminit(); 310 311 #if defined(CONFIG_SIBYTE_BCM112X) || defined(CONFIG_SIBYTE_SB1250) 312 register_smp_ops(&sb_smp_ops); 313 #endif 314 #if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) 315 register_smp_ops(&bcm1480_smp_ops); 316 #endif 317 } 318 319 void prom_putchar(char c) 320 { 321 int ret; 322 323 while ((ret = cfe_write(cfe_cons_handle, &c, 1)) == 0) 324 ; 325 } 326