1 /* 2 * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License 6 * as published by the Free Software Foundation; either version 2 7 * of the License, or (at your option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software 16 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 17 */ 18 #include <linux/kernel.h> 19 #include <linux/init.h> 20 #include <linux/linkage.h> 21 #include <linux/interrupt.h> 22 #include <linux/smp.h> 23 #include <linux/spinlock.h> 24 #include <linux/mm.h> 25 #include <linux/kernel_stat.h> 26 27 #include <asm/errno.h> 28 #include <asm/irq_regs.h> 29 #include <asm/signal.h> 30 #include <asm/io.h> 31 32 #include <asm/sibyte/bcm1480_regs.h> 33 #include <asm/sibyte/bcm1480_int.h> 34 #include <asm/sibyte/bcm1480_scd.h> 35 36 #include <asm/sibyte/sb1250_uart.h> 37 #include <asm/sibyte/sb1250.h> 38 39 /* 40 * These are the routines that handle all the low level interrupt stuff. 41 * Actions handled here are: initialization of the interrupt map, requesting of 42 * interrupt lines by handlers, dispatching if interrupts to handlers, probing 43 * for interrupt lines 44 */ 45 46 #ifdef CONFIG_PCI 47 extern unsigned long ht_eoi_space; 48 #endif 49 50 /* Store the CPU id (not the logical number) */ 51 int bcm1480_irq_owner[BCM1480_NR_IRQS]; 52 53 static DEFINE_RAW_SPINLOCK(bcm1480_imr_lock); 54 55 void bcm1480_mask_irq(int cpu, int irq) 56 { 57 unsigned long flags, hl_spacing; 58 u64 cur_ints; 59 60 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); 61 hl_spacing = 0; 62 if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) { 63 hl_spacing = BCM1480_IMR_HL_SPACING; 64 irq -= BCM1480_NR_IRQS_HALF; 65 } 66 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); 67 cur_ints |= (((u64) 1) << irq); 68 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); 69 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); 70 } 71 72 void bcm1480_unmask_irq(int cpu, int irq) 73 { 74 unsigned long flags, hl_spacing; 75 u64 cur_ints; 76 77 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); 78 hl_spacing = 0; 79 if ((irq >= BCM1480_NR_IRQS_HALF) && (irq <= BCM1480_NR_IRQS)) { 80 hl_spacing = BCM1480_IMR_HL_SPACING; 81 irq -= BCM1480_NR_IRQS_HALF; 82 } 83 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); 84 cur_ints &= ~(((u64) 1) << irq); 85 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + hl_spacing)); 86 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); 87 } 88 89 #ifdef CONFIG_SMP 90 static int bcm1480_set_affinity(struct irq_data *d, const struct cpumask *mask, 91 bool force) 92 { 93 unsigned int irq_dirty, irq = d->irq; 94 int i = 0, old_cpu, cpu, int_on, k; 95 u64 cur_ints; 96 unsigned long flags; 97 98 i = cpumask_first(mask); 99 100 /* Convert logical CPU to physical CPU */ 101 cpu = cpu_logical_map(i); 102 103 /* Protect against other affinity changers and IMR manipulation */ 104 raw_spin_lock_irqsave(&bcm1480_imr_lock, flags); 105 106 /* Swizzle each CPU's IMR (but leave the IP selection alone) */ 107 old_cpu = bcm1480_irq_owner[irq]; 108 irq_dirty = irq; 109 if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) { 110 irq_dirty -= BCM1480_NR_IRQS_HALF; 111 } 112 113 for (k=0; k<2; k++) { /* Loop through high and low interrupt mask register */ 114 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); 115 int_on = !(cur_ints & (((u64) 1) << irq_dirty)); 116 if (int_on) { 117 /* If it was on, mask it */ 118 cur_ints |= (((u64) 1) << irq_dirty); 119 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(old_cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); 120 } 121 bcm1480_irq_owner[irq] = cpu; 122 if (int_on) { 123 /* unmask for the new CPU */ 124 cur_ints = ____raw_readq(IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); 125 cur_ints &= ~(((u64) 1) << irq_dirty); 126 ____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING))); 127 } 128 } 129 raw_spin_unlock_irqrestore(&bcm1480_imr_lock, flags); 130 131 return 0; 132 } 133 #endif 134 135 136 /*****************************************************************************/ 137 138 static void disable_bcm1480_irq(struct irq_data *d) 139 { 140 unsigned int irq = d->irq; 141 142 bcm1480_mask_irq(bcm1480_irq_owner[irq], irq); 143 } 144 145 static void enable_bcm1480_irq(struct irq_data *d) 146 { 147 unsigned int irq = d->irq; 148 149 bcm1480_unmask_irq(bcm1480_irq_owner[irq], irq); 150 } 151 152 153 static void ack_bcm1480_irq(struct irq_data *d) 154 { 155 unsigned int irq_dirty, irq = d->irq; 156 u64 pending; 157 int k; 158 159 /* 160 * If the interrupt was an HT interrupt, now is the time to 161 * clear it. NOTE: we assume the HT bridge was set up to 162 * deliver the interrupts to all CPUs (which makes affinity 163 * changing easier for us) 164 */ 165 irq_dirty = irq; 166 if ((irq_dirty >= BCM1480_NR_IRQS_HALF) && (irq_dirty <= BCM1480_NR_IRQS)) { 167 irq_dirty -= BCM1480_NR_IRQS_HALF; 168 } 169 for (k=0; k<2; k++) { /* Loop through high and low LDT interrupts */ 170 pending = __raw_readq(IOADDR(A_BCM1480_IMR_REGISTER(bcm1480_irq_owner[irq], 171 R_BCM1480_IMR_LDT_INTERRUPT_H + (k*BCM1480_IMR_HL_SPACING)))); 172 pending &= ((u64)1 << (irq_dirty)); 173 if (pending) { 174 #ifdef CONFIG_SMP 175 int i; 176 for (i=0; i<NR_CPUS; i++) { 177 /* 178 * Clear for all CPUs so an affinity switch 179 * doesn't find an old status 180 */ 181 __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(cpu_logical_map(i), 182 R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING)))); 183 } 184 #else 185 __raw_writeq(pending, IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_LDT_INTERRUPT_CLR_H + (k*BCM1480_IMR_HL_SPACING)))); 186 #endif 187 188 /* 189 * Generate EOI. For Pass 1 parts, EOI is a nop. For 190 * Pass 2, the LDT world may be edge-triggered, but 191 * this EOI shouldn't hurt. If they are 192 * level-sensitive, the EOI is required. 193 */ 194 #ifdef CONFIG_PCI 195 if (ht_eoi_space) 196 *(uint32_t *)(ht_eoi_space+(irq<<16)+(7<<2)) = 0; 197 #endif 198 } 199 } 200 bcm1480_mask_irq(bcm1480_irq_owner[irq], irq); 201 } 202 203 static struct irq_chip bcm1480_irq_type = { 204 .name = "BCM1480-IMR", 205 .irq_mask_ack = ack_bcm1480_irq, 206 .irq_mask = disable_bcm1480_irq, 207 .irq_unmask = enable_bcm1480_irq, 208 #ifdef CONFIG_SMP 209 .irq_set_affinity = bcm1480_set_affinity 210 #endif 211 }; 212 213 void __init init_bcm1480_irqs(void) 214 { 215 int i; 216 217 for (i = 0; i < BCM1480_NR_IRQS; i++) { 218 irq_set_chip_and_handler(i, &bcm1480_irq_type, 219 handle_level_irq); 220 bcm1480_irq_owner[i] = 0; 221 } 222 } 223 224 /* 225 * init_IRQ is called early in the boot sequence from init/main.c. It 226 * is responsible for setting up the interrupt mapper and installing the 227 * handler that will be responsible for dispatching interrupts to the 228 * "right" place. 229 */ 230 /* 231 * For now, map all interrupts to IP[2]. We could save 232 * some cycles by parceling out system interrupts to different 233 * IP lines, but keep it simple for bringup. We'll also direct 234 * all interrupts to a single CPU; we should probably route 235 * PCI and LDT to one cpu and everything else to the other 236 * to balance the load a bit. 237 * 238 * On the second cpu, everything is set to IP5, which is 239 * ignored, EXCEPT the mailbox interrupt. That one is 240 * set to IP[2] so it is handled. This is needed so we 241 * can do cross-cpu function calls, as required by SMP 242 */ 243 244 #define IMR_IP2_VAL K_BCM1480_INT_MAP_I0 245 #define IMR_IP3_VAL K_BCM1480_INT_MAP_I1 246 #define IMR_IP4_VAL K_BCM1480_INT_MAP_I2 247 #define IMR_IP5_VAL K_BCM1480_INT_MAP_I3 248 #define IMR_IP6_VAL K_BCM1480_INT_MAP_I4 249 250 void __init arch_init_irq(void) 251 { 252 unsigned int i, cpu; 253 u64 tmp; 254 unsigned int imask = STATUSF_IP4 | STATUSF_IP3 | STATUSF_IP2 | 255 STATUSF_IP1 | STATUSF_IP0; 256 257 /* Default everything to IP2 */ 258 /* Start with _high registers which has no bit 0 interrupt source */ 259 for (i = 1; i < BCM1480_NR_IRQS_HALF; i++) { /* was I0 */ 260 for (cpu = 0; cpu < 4; cpu++) { 261 __raw_writeq(IMR_IP2_VAL, 262 IOADDR(A_BCM1480_IMR_REGISTER(cpu, 263 R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (i << 3))); 264 } 265 } 266 267 /* Now do _low registers */ 268 for (i = 0; i < BCM1480_NR_IRQS_HALF; i++) { 269 for (cpu = 0; cpu < 4; cpu++) { 270 __raw_writeq(IMR_IP2_VAL, 271 IOADDR(A_BCM1480_IMR_REGISTER(cpu, 272 R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + (i << 3))); 273 } 274 } 275 276 init_bcm1480_irqs(); 277 278 /* 279 * Map the high 16 bits of mailbox_0 registers to IP[3], for 280 * inter-cpu messages 281 */ 282 /* Was I1 */ 283 for (cpu = 0; cpu < 4; cpu++) { 284 __raw_writeq(IMR_IP3_VAL, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + 285 (K_BCM1480_INT_MBOX_0_0 << 3))); 286 } 287 288 289 /* Clear the mailboxes. The firmware may leave them dirty */ 290 for (cpu = 0; cpu < 4; cpu++) { 291 __raw_writeq(0xffffffffffffffffULL, 292 IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_0_CLR_CPU))); 293 __raw_writeq(0xffffffffffffffffULL, 294 IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_MAILBOX_1_CLR_CPU))); 295 } 296 297 298 /* Mask everything except the high 16 bit of mailbox_0 registers for all cpus */ 299 tmp = ~((u64) 0) ^ ( (((u64) 1) << K_BCM1480_INT_MBOX_0_0)); 300 for (cpu = 0; cpu < 4; cpu++) { 301 __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_H))); 302 } 303 tmp = ~((u64) 0); 304 for (cpu = 0; cpu < 4; cpu++) { 305 __raw_writeq(tmp, IOADDR(A_BCM1480_IMR_REGISTER(cpu, R_BCM1480_IMR_INTERRUPT_MASK_L))); 306 } 307 308 /* 309 * Note that the timer interrupts are also mapped, but this is 310 * done in bcm1480_time_init(). Also, the profiling driver 311 * does its own management of IP7. 312 */ 313 314 /* Enable necessary IPs, disable the rest */ 315 change_c0_status(ST0_IM, imask); 316 } 317 318 extern void bcm1480_mailbox_interrupt(void); 319 320 static inline void dispatch_ip2(void) 321 { 322 unsigned long long mask_h, mask_l; 323 unsigned int cpu = smp_processor_id(); 324 unsigned long base; 325 326 /* 327 * Default...we've hit an IP[2] interrupt, which means we've got to 328 * check the 1480 interrupt registers to figure out what to do. Need 329 * to detect which CPU we're on, now that smp_affinity is supported. 330 */ 331 base = A_BCM1480_IMR_MAPPER(cpu); 332 mask_h = __raw_readq( 333 IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_H)); 334 mask_l = __raw_readq( 335 IOADDR(base + R_BCM1480_IMR_INTERRUPT_STATUS_BASE_L)); 336 337 if (mask_h) { 338 if (mask_h ^ 1) 339 do_IRQ(fls64(mask_h) - 1); 340 else if (mask_l) 341 do_IRQ(63 + fls64(mask_l)); 342 } 343 } 344 345 asmlinkage void plat_irq_dispatch(void) 346 { 347 unsigned int cpu = smp_processor_id(); 348 unsigned int pending; 349 350 #ifdef CONFIG_SIBYTE_BCM1480_PROF 351 /* Set compare to count to silence count/compare timer interrupts */ 352 write_c0_compare(read_c0_count()); 353 #endif 354 355 pending = read_c0_cause() & read_c0_status(); 356 357 #ifdef CONFIG_SIBYTE_BCM1480_PROF 358 if (pending & CAUSEF_IP7) /* Cpu performance counter interrupt */ 359 sbprof_cpu_intr(); 360 else 361 #endif 362 363 if (pending & CAUSEF_IP4) 364 do_IRQ(K_BCM1480_INT_TIMER_0 + cpu); 365 #ifdef CONFIG_SMP 366 else if (pending & CAUSEF_IP3) 367 bcm1480_mailbox_interrupt(); 368 #endif 369 370 else if (pending & CAUSEF_IP2) 371 dispatch_ip2(); 372 } 373