1# SPDX-License-Identifier: GPL-2.0 2config SIBYTE_SB1250 3 bool 4 select CEVT_SB1250 5 select CSRC_SB1250 6 select HAVE_PCI 7 select IRQ_MIPS_CPU 8 select SIBYTE_ENABLE_LDT_IF_PCI 9 select SIBYTE_HAS_ZBUS_PROFILING 10 select SIBYTE_SB1xxx_SOC 11 select SYS_SUPPORTS_SMP 12 13config SIBYTE_BCM1120 14 bool 15 select CEVT_SB1250 16 select CSRC_SB1250 17 select IRQ_MIPS_CPU 18 select SIBYTE_BCM112X 19 select SIBYTE_HAS_ZBUS_PROFILING 20 select SIBYTE_SB1xxx_SOC 21 22config SIBYTE_BCM1125 23 bool 24 select CEVT_SB1250 25 select CSRC_SB1250 26 select HAVE_PCI 27 select IRQ_MIPS_CPU 28 select SIBYTE_BCM112X 29 select SIBYTE_HAS_ZBUS_PROFILING 30 select SIBYTE_SB1xxx_SOC 31 32config SIBYTE_BCM1125H 33 bool 34 select CEVT_SB1250 35 select CSRC_SB1250 36 select HAVE_PCI 37 select IRQ_MIPS_CPU 38 select SIBYTE_BCM112X 39 select SIBYTE_ENABLE_LDT_IF_PCI 40 select SIBYTE_HAS_ZBUS_PROFILING 41 select SIBYTE_SB1xxx_SOC 42 43config SIBYTE_BCM112X 44 bool 45 select CEVT_SB1250 46 select CSRC_SB1250 47 select IRQ_MIPS_CPU 48 select SIBYTE_SB1xxx_SOC 49 select SIBYTE_HAS_ZBUS_PROFILING 50 51config SIBYTE_BCM1x80 52 bool 53 select CEVT_BCM1480 54 select CSRC_BCM1480 55 select HAVE_PCI 56 select IRQ_MIPS_CPU 57 select SIBYTE_HAS_ZBUS_PROFILING 58 select SIBYTE_SB1xxx_SOC 59 select SYS_SUPPORTS_SMP 60 61config SIBYTE_BCM1x55 62 bool 63 select CEVT_BCM1480 64 select CSRC_BCM1480 65 select HAVE_PCI 66 select IRQ_MIPS_CPU 67 select SIBYTE_SB1xxx_SOC 68 select SIBYTE_HAS_ZBUS_PROFILING 69 select SYS_SUPPORTS_SMP 70 71config SIBYTE_SB1xxx_SOC 72 bool 73 select IRQ_MIPS_CPU 74 select SWAP_IO_SPACE 75 select SYS_SUPPORTS_32BIT_KERNEL 76 select SYS_SUPPORTS_64BIT_KERNEL 77 select FW_CFE 78 select SYS_HAS_EARLY_PRINTK 79 80choice 81 prompt "SiByte SOC Stepping" 82 depends on SIBYTE_SB1xxx_SOC 83 84config CPU_SB1_PASS_2_1250 85 bool "1250 An" 86 depends on SIBYTE_SB1250 87 select CPU_SB1_PASS_2 88 help 89 Also called BCM1250 Pass 2 90 91config CPU_SB1_PASS_2_2 92 bool "1250 Bn" 93 depends on SIBYTE_SB1250 94 select CPU_HAS_PREFETCH 95 help 96 Also called BCM1250 Pass 2.2 97 98config CPU_SB1_PASS_4 99 bool "1250 Cn" 100 depends on SIBYTE_SB1250 101 select CPU_HAS_PREFETCH 102 help 103 Also called BCM1250 Pass 3 104 105config CPU_SB1_PASS_2_112x 106 bool "112x Hybrid" 107 depends on SIBYTE_BCM112X 108 select CPU_SB1_PASS_2 109 110config CPU_SB1_PASS_3 111 bool "112x An" 112 depends on SIBYTE_BCM112X 113 select CPU_HAS_PREFETCH 114 115endchoice 116 117config CPU_SB1_PASS_2 118 bool 119 120config SIBYTE_HAS_LDT 121 bool 122 123config SIBYTE_ENABLE_LDT_IF_PCI 124 bool 125 select SIBYTE_HAS_LDT if PCI 126 127config SB1_CEX_ALWAYS_FATAL 128 bool "All cache exceptions considered fatal (no recovery attempted)" 129 depends on SIBYTE_SB1xxx_SOC 130 131config SB1_CERR_STALL 132 bool "Stall (rather than panic) on fatal cache error" 133 depends on SIBYTE_SB1xxx_SOC 134 135config SIBYTE_CFE_CONSOLE 136 bool "Use firmware console" 137 depends on SIBYTE_SB1xxx_SOC 138 help 139 Use the CFE API's console write routines during boot. Other console 140 options (VT console, sb1250 duart console, etc.) should not be 141 configured. 142 143config SIBYTE_BUS_WATCHER 144 bool "Support for Bus Watcher statistics" 145 depends on SIBYTE_SB1xxx_SOC && \ 146 (SIBYTE_BCM112X || SIBYTE_SB1250 || \ 147 SIBYTE_BCM1x55 || SIBYTE_BCM1x80) 148 help 149 Handle and keep statistics on the bus error interrupts (COR_ECC, 150 BAD_ECC, IO_BUS). 151 152config SIBYTE_BW_TRACE 153 bool "Capture bus trace before bus error" 154 depends on SIBYTE_BUS_WATCHER 155 help 156 Run a continuous bus trace, dumping the raw data as soon as 157 a ZBbus error is detected. Cannot work if ZBbus profiling 158 is turned on, and also will interfere with JTAG-based trace 159 buffer activity. Raw buffer data is dumped to console, and 160 must be processed off-line. 161 162config SIBYTE_TBPROF 163 tristate "Support for ZBbus profiling" 164 depends on SIBYTE_HAS_ZBUS_PROFILING 165 166config SIBYTE_HAS_ZBUS_PROFILING 167 bool 168