1 /* 2 * Code to handle IP32 IRQs 3 * 4 * This file is subject to the terms and conditions of the GNU General Public 5 * License. See the file "COPYING" in the main directory of this archive 6 * for more details. 7 * 8 * Copyright (C) 2000 Harald Koerfgen 9 * Copyright (C) 2001 Keith M Wesolowski 10 */ 11 #include <linux/init.h> 12 #include <linux/kernel_stat.h> 13 #include <linux/types.h> 14 #include <linux/interrupt.h> 15 #include <linux/irq.h> 16 #include <linux/bitops.h> 17 #include <linux/kernel.h> 18 #include <linux/mm.h> 19 #include <linux/random.h> 20 #include <linux/sched.h> 21 #include <linux/sched/debug.h> 22 23 #include <asm/irq_cpu.h> 24 #include <asm/mipsregs.h> 25 #include <asm/signal.h> 26 #include <asm/time.h> 27 #include <asm/ip32/crime.h> 28 #include <asm/ip32/mace.h> 29 #include <asm/ip32/ip32_ints.h> 30 31 /* issue a PIO read to make sure no PIO writes are pending */ 32 static inline void flush_crime_bus(void) 33 { 34 crime->control; 35 } 36 37 static inline void flush_mace_bus(void) 38 { 39 mace->perif.ctrl.misc; 40 } 41 42 /* 43 * O2 irq map 44 * 45 * IP0 -> software (ignored) 46 * IP1 -> software (ignored) 47 * IP2 -> (irq0) C crime 1.1 all interrupts; crime 1.5 ??? 48 * IP3 -> (irq1) X unknown 49 * IP4 -> (irq2) X unknown 50 * IP5 -> (irq3) X unknown 51 * IP6 -> (irq4) X unknown 52 * IP7 -> (irq5) 7 CPU count/compare timer (system timer) 53 * 54 * crime: (C) 55 * 56 * CRIME_INT_STAT 31:0: 57 * 58 * 0 -> 8 Video in 1 59 * 1 -> 9 Video in 2 60 * 2 -> 10 Video out 61 * 3 -> 11 Mace ethernet 62 * 4 -> S SuperIO sub-interrupt 63 * 5 -> M Miscellaneous sub-interrupt 64 * 6 -> A Audio sub-interrupt 65 * 7 -> 15 PCI bridge errors 66 * 8 -> 16 PCI SCSI aic7xxx 0 67 * 9 -> 17 PCI SCSI aic7xxx 1 68 * 10 -> 18 PCI slot 0 69 * 11 -> 19 unused (PCI slot 1) 70 * 12 -> 20 unused (PCI slot 2) 71 * 13 -> 21 unused (PCI shared 0) 72 * 14 -> 22 unused (PCI shared 1) 73 * 15 -> 23 unused (PCI shared 2) 74 * 16 -> 24 GBE0 (E) 75 * 17 -> 25 GBE1 (E) 76 * 18 -> 26 GBE2 (E) 77 * 19 -> 27 GBE3 (E) 78 * 20 -> 28 CPU errors 79 * 21 -> 29 Memory errors 80 * 22 -> 30 RE empty edge (E) 81 * 23 -> 31 RE full edge (E) 82 * 24 -> 32 RE idle edge (E) 83 * 25 -> 33 RE empty level 84 * 26 -> 34 RE full level 85 * 27 -> 35 RE idle level 86 * 28 -> 36 unused (software 0) (E) 87 * 29 -> 37 unused (software 1) (E) 88 * 30 -> 38 unused (software 2) - crime 1.5 CPU SysCorError (E) 89 * 31 -> 39 VICE 90 * 91 * S, M, A: Use the MACE ISA interrupt register 92 * MACE_ISA_INT_STAT 31:0 93 * 94 * 0-7 -> 40-47 Audio 95 * 8 -> 48 RTC 96 * 9 -> 49 Keyboard 97 * 10 -> X Keyboard polled 98 * 11 -> 51 Mouse 99 * 12 -> X Mouse polled 100 * 13-15 -> 53-55 Count/compare timers 101 * 16-19 -> 56-59 Parallel (16 E) 102 * 20-25 -> 60-62 Serial 1 (22 E) 103 * 26-31 -> 66-71 Serial 2 (28 E) 104 * 105 * Note that this means IRQs 12-14, 50, and 52 do not exist. This is a 106 * different IRQ map than IRIX uses, but that's OK as Linux irq handling 107 * is quite different anyway. 108 */ 109 110 /* Some initial interrupts to set up */ 111 extern irqreturn_t crime_memerr_intr(int irq, void *dev_id); 112 extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id); 113 114 /* 115 * This is for pure CRIME interrupts - ie not MACE. The advantage? 116 * We get to split the register in half and do faster lookups. 117 */ 118 119 static uint64_t crime_mask; 120 121 static inline void crime_enable_irq(struct irq_data *d) 122 { 123 unsigned int bit = d->irq - CRIME_IRQ_BASE; 124 125 crime_mask |= 1 << bit; 126 crime->imask = crime_mask; 127 } 128 129 static inline void crime_disable_irq(struct irq_data *d) 130 { 131 unsigned int bit = d->irq - CRIME_IRQ_BASE; 132 133 crime_mask &= ~(1 << bit); 134 crime->imask = crime_mask; 135 flush_crime_bus(); 136 } 137 138 static struct irq_chip crime_level_interrupt = { 139 .name = "IP32 CRIME", 140 .irq_mask = crime_disable_irq, 141 .irq_unmask = crime_enable_irq, 142 }; 143 144 static void crime_edge_mask_and_ack_irq(struct irq_data *d) 145 { 146 unsigned int bit = d->irq - CRIME_IRQ_BASE; 147 uint64_t crime_int; 148 149 /* Edge triggered interrupts must be cleared. */ 150 crime_int = crime->hard_int; 151 crime_int &= ~(1 << bit); 152 crime->hard_int = crime_int; 153 154 crime_disable_irq(d); 155 } 156 157 static struct irq_chip crime_edge_interrupt = { 158 .name = "IP32 CRIME", 159 .irq_ack = crime_edge_mask_and_ack_irq, 160 .irq_mask = crime_disable_irq, 161 .irq_mask_ack = crime_edge_mask_and_ack_irq, 162 .irq_unmask = crime_enable_irq, 163 }; 164 165 /* 166 * This is for MACE PCI interrupts. We can decrease bus traffic by masking 167 * as close to the source as possible. This also means we can take the 168 * next chunk of the CRIME register in one piece. 169 */ 170 171 static unsigned long macepci_mask; 172 173 static void enable_macepci_irq(struct irq_data *d) 174 { 175 macepci_mask |= MACEPCI_CONTROL_INT(d->irq - MACEPCI_SCSI0_IRQ); 176 mace->pci.control = macepci_mask; 177 crime_mask |= 1 << (d->irq - CRIME_IRQ_BASE); 178 crime->imask = crime_mask; 179 } 180 181 static void disable_macepci_irq(struct irq_data *d) 182 { 183 crime_mask &= ~(1 << (d->irq - CRIME_IRQ_BASE)); 184 crime->imask = crime_mask; 185 flush_crime_bus(); 186 macepci_mask &= ~MACEPCI_CONTROL_INT(d->irq - MACEPCI_SCSI0_IRQ); 187 mace->pci.control = macepci_mask; 188 flush_mace_bus(); 189 } 190 191 static struct irq_chip ip32_macepci_interrupt = { 192 .name = "IP32 MACE PCI", 193 .irq_mask = disable_macepci_irq, 194 .irq_unmask = enable_macepci_irq, 195 }; 196 197 /* This is used for MACE ISA interrupts. That means bits 4-6 in the 198 * CRIME register. 199 */ 200 201 #define MACEISA_AUDIO_INT (MACEISA_AUDIO_SW_INT | \ 202 MACEISA_AUDIO_SC_INT | \ 203 MACEISA_AUDIO1_DMAT_INT | \ 204 MACEISA_AUDIO1_OF_INT | \ 205 MACEISA_AUDIO2_DMAT_INT | \ 206 MACEISA_AUDIO2_MERR_INT | \ 207 MACEISA_AUDIO3_DMAT_INT | \ 208 MACEISA_AUDIO3_MERR_INT) 209 #define MACEISA_MISC_INT (MACEISA_RTC_INT | \ 210 MACEISA_KEYB_INT | \ 211 MACEISA_KEYB_POLL_INT | \ 212 MACEISA_MOUSE_INT | \ 213 MACEISA_MOUSE_POLL_INT | \ 214 MACEISA_TIMER0_INT | \ 215 MACEISA_TIMER1_INT | \ 216 MACEISA_TIMER2_INT) 217 #define MACEISA_SUPERIO_INT (MACEISA_PARALLEL_INT | \ 218 MACEISA_PAR_CTXA_INT | \ 219 MACEISA_PAR_CTXB_INT | \ 220 MACEISA_PAR_MERR_INT | \ 221 MACEISA_SERIAL1_INT | \ 222 MACEISA_SERIAL1_TDMAT_INT | \ 223 MACEISA_SERIAL1_TDMAPR_INT | \ 224 MACEISA_SERIAL1_TDMAME_INT | \ 225 MACEISA_SERIAL1_RDMAT_INT | \ 226 MACEISA_SERIAL1_RDMAOR_INT | \ 227 MACEISA_SERIAL2_INT | \ 228 MACEISA_SERIAL2_TDMAT_INT | \ 229 MACEISA_SERIAL2_TDMAPR_INT | \ 230 MACEISA_SERIAL2_TDMAME_INT | \ 231 MACEISA_SERIAL2_RDMAT_INT | \ 232 MACEISA_SERIAL2_RDMAOR_INT) 233 234 static unsigned long maceisa_mask; 235 236 static void enable_maceisa_irq(struct irq_data *d) 237 { 238 unsigned int crime_int = 0; 239 240 pr_debug("maceisa enable: %u\n", d->irq); 241 242 switch (d->irq) { 243 case MACEISA_AUDIO_SW_IRQ ... MACEISA_AUDIO3_MERR_IRQ: 244 crime_int = MACE_AUDIO_INT; 245 break; 246 case MACEISA_RTC_IRQ ... MACEISA_TIMER2_IRQ: 247 crime_int = MACE_MISC_INT; 248 break; 249 case MACEISA_PARALLEL_IRQ ... MACEISA_SERIAL2_RDMAOR_IRQ: 250 crime_int = MACE_SUPERIO_INT; 251 break; 252 } 253 pr_debug("crime_int %08x enabled\n", crime_int); 254 crime_mask |= crime_int; 255 crime->imask = crime_mask; 256 maceisa_mask |= 1 << (d->irq - MACEISA_AUDIO_SW_IRQ); 257 mace->perif.ctrl.imask = maceisa_mask; 258 } 259 260 static void disable_maceisa_irq(struct irq_data *d) 261 { 262 unsigned int crime_int = 0; 263 264 maceisa_mask &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ)); 265 if (!(maceisa_mask & MACEISA_AUDIO_INT)) 266 crime_int |= MACE_AUDIO_INT; 267 if (!(maceisa_mask & MACEISA_MISC_INT)) 268 crime_int |= MACE_MISC_INT; 269 if (!(maceisa_mask & MACEISA_SUPERIO_INT)) 270 crime_int |= MACE_SUPERIO_INT; 271 crime_mask &= ~crime_int; 272 crime->imask = crime_mask; 273 flush_crime_bus(); 274 mace->perif.ctrl.imask = maceisa_mask; 275 flush_mace_bus(); 276 } 277 278 static void mask_and_ack_maceisa_irq(struct irq_data *d) 279 { 280 unsigned long mace_int; 281 282 /* edge triggered */ 283 mace_int = mace->perif.ctrl.istat; 284 mace_int &= ~(1 << (d->irq - MACEISA_AUDIO_SW_IRQ)); 285 mace->perif.ctrl.istat = mace_int; 286 287 disable_maceisa_irq(d); 288 } 289 290 static struct irq_chip ip32_maceisa_level_interrupt = { 291 .name = "IP32 MACE ISA", 292 .irq_mask = disable_maceisa_irq, 293 .irq_unmask = enable_maceisa_irq, 294 }; 295 296 static struct irq_chip ip32_maceisa_edge_interrupt = { 297 .name = "IP32 MACE ISA", 298 .irq_ack = mask_and_ack_maceisa_irq, 299 .irq_mask = disable_maceisa_irq, 300 .irq_mask_ack = mask_and_ack_maceisa_irq, 301 .irq_unmask = enable_maceisa_irq, 302 }; 303 304 /* This is used for regular non-ISA, non-PCI MACE interrupts. That means 305 * bits 0-3 and 7 in the CRIME register. 306 */ 307 308 static void enable_mace_irq(struct irq_data *d) 309 { 310 unsigned int bit = d->irq - CRIME_IRQ_BASE; 311 312 crime_mask |= (1 << bit); 313 crime->imask = crime_mask; 314 } 315 316 static void disable_mace_irq(struct irq_data *d) 317 { 318 unsigned int bit = d->irq - CRIME_IRQ_BASE; 319 320 crime_mask &= ~(1 << bit); 321 crime->imask = crime_mask; 322 flush_crime_bus(); 323 } 324 325 static struct irq_chip ip32_mace_interrupt = { 326 .name = "IP32 MACE", 327 .irq_mask = disable_mace_irq, 328 .irq_unmask = enable_mace_irq, 329 }; 330 331 static void ip32_unknown_interrupt(void) 332 { 333 printk("Unknown interrupt occurred!\n"); 334 printk("cp0_status: %08x\n", read_c0_status()); 335 printk("cp0_cause: %08x\n", read_c0_cause()); 336 printk("CRIME intr mask: %016lx\n", crime->imask); 337 printk("CRIME intr status: %016lx\n", crime->istat); 338 printk("CRIME hardware intr register: %016lx\n", crime->hard_int); 339 printk("MACE ISA intr mask: %08lx\n", mace->perif.ctrl.imask); 340 printk("MACE ISA intr status: %08lx\n", mace->perif.ctrl.istat); 341 printk("MACE PCI control register: %08x\n", mace->pci.control); 342 343 printk("Register dump:\n"); 344 show_regs(get_irq_regs()); 345 346 printk("Please mail this report to linux-mips@vger.kernel.org\n"); 347 printk("Spinning..."); 348 while(1) ; 349 } 350 351 /* CRIME 1.1 appears to deliver all interrupts to this one pin. */ 352 /* change this to loop over all edge-triggered irqs, exception masked out ones */ 353 static void ip32_irq0(void) 354 { 355 uint64_t crime_int; 356 int irq = 0; 357 358 /* 359 * Sanity check interrupt numbering enum. 360 * MACE got 32 interrupts and there are 32 MACE ISA interrupts daisy 361 * chained. 362 */ 363 BUILD_BUG_ON(CRIME_VICE_IRQ - MACE_VID_IN1_IRQ != 31); 364 BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31); 365 366 crime_int = crime->istat & crime_mask; 367 368 /* crime sometime delivers spurious interrupts, ignore them */ 369 if (unlikely(crime_int == 0)) 370 return; 371 372 irq = MACE_VID_IN1_IRQ + __ffs(crime_int); 373 374 if (crime_int & CRIME_MACEISA_INT_MASK) { 375 unsigned long mace_int = mace->perif.ctrl.istat; 376 irq = __ffs(mace_int & maceisa_mask) + MACEISA_AUDIO_SW_IRQ; 377 } 378 379 pr_debug("*irq %u*\n", irq); 380 do_IRQ(irq); 381 } 382 383 static void ip32_irq1(void) 384 { 385 ip32_unknown_interrupt(); 386 } 387 388 static void ip32_irq2(void) 389 { 390 ip32_unknown_interrupt(); 391 } 392 393 static void ip32_irq3(void) 394 { 395 ip32_unknown_interrupt(); 396 } 397 398 static void ip32_irq4(void) 399 { 400 ip32_unknown_interrupt(); 401 } 402 403 static void ip32_irq5(void) 404 { 405 do_IRQ(MIPS_CPU_IRQ_BASE + 7); 406 } 407 408 asmlinkage void plat_irq_dispatch(void) 409 { 410 unsigned int pending = read_c0_status() & read_c0_cause(); 411 412 if (likely(pending & IE_IRQ0)) 413 ip32_irq0(); 414 else if (unlikely(pending & IE_IRQ1)) 415 ip32_irq1(); 416 else if (unlikely(pending & IE_IRQ2)) 417 ip32_irq2(); 418 else if (unlikely(pending & IE_IRQ3)) 419 ip32_irq3(); 420 else if (unlikely(pending & IE_IRQ4)) 421 ip32_irq4(); 422 else if (likely(pending & IE_IRQ5)) 423 ip32_irq5(); 424 } 425 426 void __init arch_init_irq(void) 427 { 428 unsigned int irq; 429 430 /* Install our interrupt handler, then clear and disable all 431 * CRIME and MACE interrupts. */ 432 crime->imask = 0; 433 crime->hard_int = 0; 434 crime->soft_int = 0; 435 mace->perif.ctrl.istat = 0; 436 mace->perif.ctrl.imask = 0; 437 438 mips_cpu_irq_init(); 439 for (irq = CRIME_IRQ_BASE; irq <= IP32_IRQ_MAX; irq++) { 440 switch (irq) { 441 case MACE_VID_IN1_IRQ ... MACE_PCI_BRIDGE_IRQ: 442 irq_set_chip_and_handler_name(irq, 443 &ip32_mace_interrupt, 444 handle_level_irq, 445 "level"); 446 break; 447 448 case MACEPCI_SCSI0_IRQ ... MACEPCI_SHARED2_IRQ: 449 irq_set_chip_and_handler_name(irq, 450 &ip32_macepci_interrupt, 451 handle_level_irq, 452 "level"); 453 break; 454 455 case CRIME_CPUERR_IRQ: 456 case CRIME_MEMERR_IRQ: 457 irq_set_chip_and_handler_name(irq, 458 &crime_level_interrupt, 459 handle_level_irq, 460 "level"); 461 break; 462 463 case CRIME_GBE0_IRQ ... CRIME_GBE3_IRQ: 464 case CRIME_RE_EMPTY_E_IRQ ... CRIME_RE_IDLE_E_IRQ: 465 case CRIME_SOFT0_IRQ ... CRIME_SOFT2_IRQ: 466 case CRIME_VICE_IRQ: 467 irq_set_chip_and_handler_name(irq, 468 &crime_edge_interrupt, 469 handle_edge_irq, 470 "edge"); 471 break; 472 473 case MACEISA_PARALLEL_IRQ: 474 case MACEISA_SERIAL1_TDMAPR_IRQ: 475 case MACEISA_SERIAL2_TDMAPR_IRQ: 476 irq_set_chip_and_handler_name(irq, 477 &ip32_maceisa_edge_interrupt, 478 handle_edge_irq, 479 "edge"); 480 break; 481 482 default: 483 irq_set_chip_and_handler_name(irq, 484 &ip32_maceisa_level_interrupt, 485 handle_level_irq, 486 "level"); 487 break; 488 } 489 } 490 if (request_irq(CRIME_MEMERR_IRQ, crime_memerr_intr, 0, 491 "CRIME memory error", NULL)) 492 pr_err("Failed to register CRIME memory error interrupt\n"); 493 if (request_irq(CRIME_CPUERR_IRQ, crime_cpuerr_intr, 0, 494 "CRIME CPU error", NULL)) 495 pr_err("Failed to register CRIME CPU error interrupt\n"); 496 497 #define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5) 498 change_c0_status(ST0_IM, ALLINTS); 499 } 500