1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * 4 * Parts of this file are based on Ralink's 2.6.21 BSP 5 * 6 * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org> 7 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org> 8 * Copyright (C) 2013 John Crispin <john@phrozen.org> 9 */ 10 11 #include <linux/kernel.h> 12 #include <linux/init.h> 13 14 #include <asm/mipsregs.h> 15 #include <asm/mach-ralink/ralink_regs.h> 16 #include <asm/mach-ralink/rt288x.h> 17 #include <asm/mach-ralink/pinmux.h> 18 19 #include "common.h" 20 21 static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; 22 static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 4) }; 23 static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 8) }; 24 static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 5) }; 25 static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 2) }; 26 static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 16) }; 27 static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 32) }; 28 29 static struct rt2880_pmx_group rt2880_pinmux_data_act[] = { 30 GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C), 31 GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI), 32 GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0), 33 GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG), 34 GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO), 35 GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM), 36 GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI), 37 { 0 } 38 }; 39 40 void __init ralink_clk_init(void) 41 { 42 unsigned long cpu_rate, wmac_rate = 40000000; 43 u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG); 44 t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK); 45 46 switch (t) { 47 case SYSTEM_CONFIG_CPUCLK_250: 48 cpu_rate = 250000000; 49 break; 50 case SYSTEM_CONFIG_CPUCLK_266: 51 cpu_rate = 266666667; 52 break; 53 case SYSTEM_CONFIG_CPUCLK_280: 54 cpu_rate = 280000000; 55 break; 56 case SYSTEM_CONFIG_CPUCLK_300: 57 cpu_rate = 300000000; 58 break; 59 } 60 61 ralink_clk_add("cpu", cpu_rate); 62 ralink_clk_add("300100.timer", cpu_rate / 2); 63 ralink_clk_add("300120.watchdog", cpu_rate / 2); 64 ralink_clk_add("300500.uart", cpu_rate / 2); 65 ralink_clk_add("300900.i2c", cpu_rate / 2); 66 ralink_clk_add("300c00.uartlite", cpu_rate / 2); 67 ralink_clk_add("400000.ethernet", cpu_rate / 2); 68 ralink_clk_add("480000.wmac", wmac_rate); 69 } 70 71 void __init ralink_of_remap(void) 72 { 73 rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc"); 74 rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc"); 75 76 if (!rt_sysc_membase || !rt_memc_membase) 77 panic("Failed to remap core resources"); 78 } 79 80 void __init prom_soc_init(struct ralink_soc_info *soc_info) 81 { 82 void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT2880_SYSC_BASE); 83 const char *name; 84 u32 n0; 85 u32 n1; 86 u32 id; 87 88 n0 = __raw_readl(sysc + SYSC_REG_CHIP_NAME0); 89 n1 = __raw_readl(sysc + SYSC_REG_CHIP_NAME1); 90 id = __raw_readl(sysc + SYSC_REG_CHIP_ID); 91 92 if (n0 == RT2880_CHIP_NAME0 && n1 == RT2880_CHIP_NAME1) { 93 soc_info->compatible = "ralink,r2880-soc"; 94 name = "RT2880"; 95 } else { 96 panic("rt288x: unknown SoC, n0:%08x n1:%08x", n0, n1); 97 } 98 99 snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN, 100 "Ralink %s id:%u rev:%u", 101 name, 102 (id >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK, 103 (id & CHIP_ID_REV_MASK)); 104 105 soc_info->mem_base = RT2880_SDRAM_BASE; 106 soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; 107 soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; 108 109 rt2880_pinmux_data = rt2880_pinmux_data_act; 110 ralink_soc = RT2880_SOC; 111 } 112