xref: /openbmc/linux/arch/mips/ralink/rt288x.c (revision a0936e9e)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *
4  * Parts of this file are based on Ralink's 2.6.21 BSP
5  *
6  * Copyright (C) 2008-2011 Gabor Juhos <juhosg@openwrt.org>
7  * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
8  * Copyright (C) 2013 John Crispin <john@phrozen.org>
9  */
10 
11 #include <linux/kernel.h>
12 #include <linux/init.h>
13 #include <linux/slab.h>
14 #include <linux/sys_soc.h>
15 
16 #include <asm/mipsregs.h>
17 #include <asm/mach-ralink/ralink_regs.h>
18 #include <asm/mach-ralink/rt288x.h>
19 
20 #include "common.h"
21 
22 static struct ralink_soc_info *soc_info_ptr;
23 
24 void __init ralink_clk_init(void)
25 {
26 	unsigned long cpu_rate, wmac_rate = 40000000;
27 	u32 t = rt_sysc_r32(SYSC_REG_SYSTEM_CONFIG);
28 	t = ((t >> SYSTEM_CONFIG_CPUCLK_SHIFT) & SYSTEM_CONFIG_CPUCLK_MASK);
29 
30 	switch (t) {
31 	case SYSTEM_CONFIG_CPUCLK_250:
32 		cpu_rate = 250000000;
33 		break;
34 	case SYSTEM_CONFIG_CPUCLK_266:
35 		cpu_rate = 266666667;
36 		break;
37 	case SYSTEM_CONFIG_CPUCLK_280:
38 		cpu_rate = 280000000;
39 		break;
40 	case SYSTEM_CONFIG_CPUCLK_300:
41 		cpu_rate = 300000000;
42 		break;
43 	}
44 
45 	ralink_clk_add("cpu", cpu_rate);
46 	ralink_clk_add("300100.timer", cpu_rate / 2);
47 	ralink_clk_add("300120.watchdog", cpu_rate / 2);
48 	ralink_clk_add("300500.uart", cpu_rate / 2);
49 	ralink_clk_add("300900.i2c", cpu_rate / 2);
50 	ralink_clk_add("300c00.uartlite", cpu_rate / 2);
51 	ralink_clk_add("400000.ethernet", cpu_rate / 2);
52 	ralink_clk_add("480000.wmac", wmac_rate);
53 }
54 
55 void __init ralink_of_remap(void)
56 {
57 	rt_sysc_membase = plat_of_remap_node("ralink,rt2880-sysc");
58 	rt_memc_membase = plat_of_remap_node("ralink,rt2880-memc");
59 
60 	if (!rt_sysc_membase || !rt_memc_membase)
61 		panic("Failed to remap core resources");
62 }
63 
64 static unsigned int __init rt2880_get_soc_name0(void)
65 {
66 	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME0);
67 }
68 
69 static unsigned int __init rt2880_get_soc_name1(void)
70 {
71 	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_NAME1);
72 }
73 
74 static bool __init rt2880_soc_valid(void)
75 {
76 	if (rt2880_get_soc_name0() == RT2880_CHIP_NAME0 &&
77 	    rt2880_get_soc_name1() == RT2880_CHIP_NAME1)
78 		return true;
79 	else
80 		return false;
81 }
82 
83 static const char __init *rt2880_get_soc_name(void)
84 {
85 	if (rt2880_soc_valid())
86 		return "RT2880";
87 	else
88 		return "invalid";
89 }
90 
91 static unsigned int __init rt2880_get_soc_id(void)
92 {
93 	return __raw_readl(RT2880_SYSC_BASE + SYSC_REG_CHIP_ID);
94 }
95 
96 static unsigned int __init rt2880_get_soc_ver(void)
97 {
98 	return (rt2880_get_soc_id() >> CHIP_ID_ID_SHIFT) & CHIP_ID_ID_MASK;
99 }
100 
101 static unsigned int __init rt2880_get_soc_rev(void)
102 {
103 	return (rt2880_get_soc_id() & CHIP_ID_REV_MASK);
104 }
105 
106 static int __init rt2880_soc_dev_init(void)
107 {
108 	struct soc_device *soc_dev;
109 	struct soc_device_attribute *soc_dev_attr;
110 
111 	soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
112 	if (!soc_dev_attr)
113 		return -ENOMEM;
114 
115 	soc_dev_attr->family = "Ralink";
116 	soc_dev_attr->soc_id = rt2880_get_soc_name();
117 
118 	soc_dev_attr->data = soc_info_ptr;
119 
120 	soc_dev = soc_device_register(soc_dev_attr);
121 	if (IS_ERR(soc_dev)) {
122 		kfree(soc_dev_attr);
123 		return PTR_ERR(soc_dev);
124 	}
125 
126 	return 0;
127 }
128 device_initcall(rt2880_soc_dev_init);
129 
130 void __init prom_soc_init(struct ralink_soc_info *soc_info)
131 {
132 	if (rt2880_soc_valid())
133 		soc_info->compatible = "ralink,r2880-soc";
134 	else
135 		panic("rt288x: unknown SoC, n0:%08x n1:%08x",
136 		      rt2880_get_soc_name0(), rt2880_get_soc_name1());
137 
138 	snprintf(soc_info->sys_type, RAMIPS_SYS_TYPE_LEN,
139 		"Ralink %s id:%u rev:%u",
140 		rt2880_get_soc_name(),
141 		rt2880_get_soc_ver(),
142 		rt2880_get_soc_rev());
143 
144 	soc_info->mem_base = RT2880_SDRAM_BASE;
145 	soc_info->mem_size_min = RT2880_MEM_SIZE_MIN;
146 	soc_info->mem_size_max = RT2880_MEM_SIZE_MAX;
147 
148 	ralink_soc = RT2880_SOC;
149 	soc_info_ptr = soc_info;
150 }
151