xref: /openbmc/linux/arch/mips/pci/pci-xtalk-bridge.c (revision 46a73e9e)
1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2003 Christoph Hellwig (hch@lst.de)
4  * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org)
5  * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
6  */
7 #include <linux/kernel.h>
8 #include <linux/export.h>
9 #include <linux/pci.h>
10 #include <linux/smp.h>
11 #include <linux/dma-direct.h>
12 #include <linux/platform_device.h>
13 #include <linux/platform_data/xtalk-bridge.h>
14 
15 #include <asm/pci/bridge.h>
16 #include <asm/paccess.h>
17 #include <asm/sn/irq_alloc.h>
18 
19 /*
20  * Most of the IOC3 PCI config register aren't present
21  * we emulate what is needed for a normal PCI enumeration
22  */
23 static int ioc3_cfg_rd(void *addr, int where, int size, u32 *value)
24 {
25 	u32 cf, shift, mask;
26 
27 	switch (where & ~3) {
28 	case 0x00 ... 0x10:
29 	case 0x40 ... 0x44:
30 		if (get_dbe(cf, (u32 *)addr))
31 			return PCIBIOS_DEVICE_NOT_FOUND;
32 		break;
33 	case 0x3c:
34 		/* emulate sane interrupt pin value */
35 		cf = 0x00000100;
36 		break;
37 	default:
38 		cf = 0;
39 		break;
40 	}
41 	shift = (where & 3) << 3;
42 	mask = 0xffffffffU >> ((4 - size) << 3);
43 	*value = (cf >> shift) & mask;
44 
45 	return PCIBIOS_SUCCESSFUL;
46 }
47 
48 static int ioc3_cfg_wr(void *addr, int where, int size, u32 value)
49 {
50 	u32 cf, shift, mask, smask;
51 
52 	if ((where >= 0x14 && where < 0x40) || (where >= 0x48))
53 		return PCIBIOS_SUCCESSFUL;
54 
55 	if (get_dbe(cf, (u32 *)addr))
56 		return PCIBIOS_DEVICE_NOT_FOUND;
57 
58 	shift = ((where & 3) << 3);
59 	mask = (0xffffffffU >> ((4 - size) << 3));
60 	smask = mask << shift;
61 
62 	cf = (cf & ~smask) | ((value & mask) << shift);
63 	if (put_dbe(cf, (u32 *)addr))
64 		return PCIBIOS_DEVICE_NOT_FOUND;
65 
66 	return PCIBIOS_SUCCESSFUL;
67 }
68 
69 static void bridge_disable_swapping(struct pci_dev *dev)
70 {
71 	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
72 	int slot = PCI_SLOT(dev->devfn);
73 
74 	/* Turn off byte swapping */
75 	bridge_clr(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
76 	bridge_read(bc, b_widget.w_tflush);	/* Flush */
77 }
78 
79 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3,
80 	bridge_disable_swapping);
81 
82 
83 /*
84  * The Bridge ASIC supports both type 0 and type 1 access.  Type 1 is
85  * not really documented, so right now I can't write code which uses it.
86  * Therefore we use type 0 accesses for now even though they won't work
87  * correctly for PCI-to-PCI bridges.
88  *
89  * The function is complicated by the ultimate brokenness of the IOC3 chip
90  * which is used in SGI systems.  The IOC3 can only handle 32-bit PCI
91  * accesses and does only decode parts of it's address space.
92  */
93 static int pci_conf0_read_config(struct pci_bus *bus, unsigned int devfn,
94 				 int where, int size, u32 *value)
95 {
96 	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
97 	struct bridge_regs *bridge = bc->base;
98 	int slot = PCI_SLOT(devfn);
99 	int fn = PCI_FUNC(devfn);
100 	void *addr;
101 	u32 cf;
102 	int res;
103 
104 	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
105 	if (get_dbe(cf, (u32 *)addr))
106 		return PCIBIOS_DEVICE_NOT_FOUND;
107 
108 	/*
109 	 * IOC3 is broken beyond belief ...  Don't even give the
110 	 * generic PCI code a chance to look at it for real ...
111 	 */
112 	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
113 		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
114 		return ioc3_cfg_rd(addr, where, size, value);
115 	}
116 
117 	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
118 
119 	if (size == 1)
120 		res = get_dbe(*value, (u8 *)addr);
121 	else if (size == 2)
122 		res = get_dbe(*value, (u16 *)addr);
123 	else
124 		res = get_dbe(*value, (u32 *)addr);
125 
126 	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
127 }
128 
129 static int pci_conf1_read_config(struct pci_bus *bus, unsigned int devfn,
130 				 int where, int size, u32 *value)
131 {
132 	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
133 	struct bridge_regs *bridge = bc->base;
134 	int busno = bus->number;
135 	int slot = PCI_SLOT(devfn);
136 	int fn = PCI_FUNC(devfn);
137 	void *addr;
138 	u32 cf;
139 	int res;
140 
141 	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
142 	addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
143 	if (get_dbe(cf, (u32 *)addr))
144 		return PCIBIOS_DEVICE_NOT_FOUND;
145 
146 	/*
147 	 * IOC3 is broken beyond belief ...  Don't even give the
148 	 * generic PCI code a chance to look at it for real ...
149 	 */
150 	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
151 		addr = &bridge->b_type1_cfg.c[(fn << 8) | (where & ~3)];
152 		return ioc3_cfg_rd(addr, where, size, value);
153 	}
154 
155 	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
156 
157 	if (size == 1)
158 		res = get_dbe(*value, (u8 *)addr);
159 	else if (size == 2)
160 		res = get_dbe(*value, (u16 *)addr);
161 	else
162 		res = get_dbe(*value, (u32 *)addr);
163 
164 	return res ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
165 }
166 
167 static int pci_read_config(struct pci_bus *bus, unsigned int devfn,
168 			   int where, int size, u32 *value)
169 {
170 	if (!pci_is_root_bus(bus))
171 		return pci_conf1_read_config(bus, devfn, where, size, value);
172 
173 	return pci_conf0_read_config(bus, devfn, where, size, value);
174 }
175 
176 static int pci_conf0_write_config(struct pci_bus *bus, unsigned int devfn,
177 				  int where, int size, u32 value)
178 {
179 	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
180 	struct bridge_regs *bridge = bc->base;
181 	int slot = PCI_SLOT(devfn);
182 	int fn = PCI_FUNC(devfn);
183 	void *addr;
184 	u32 cf;
185 	int res;
186 
187 	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[PCI_VENDOR_ID];
188 	if (get_dbe(cf, (u32 *)addr))
189 		return PCIBIOS_DEVICE_NOT_FOUND;
190 
191 	/*
192 	 * IOC3 is broken beyond belief ...  Don't even give the
193 	 * generic PCI code a chance to look at it for real ...
194 	 */
195 	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
196 		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
197 		return ioc3_cfg_wr(addr, where, size, value);
198 	}
199 
200 	addr = &bridge->b_type0_cfg_dev[slot].f[fn].c[where ^ (4 - size)];
201 
202 	if (size == 1)
203 		res = put_dbe(value, (u8 *)addr);
204 	else if (size == 2)
205 		res = put_dbe(value, (u16 *)addr);
206 	else
207 		res = put_dbe(value, (u32 *)addr);
208 
209 	if (res)
210 		return PCIBIOS_DEVICE_NOT_FOUND;
211 
212 	return PCIBIOS_SUCCESSFUL;
213 }
214 
215 static int pci_conf1_write_config(struct pci_bus *bus, unsigned int devfn,
216 				  int where, int size, u32 value)
217 {
218 	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
219 	struct bridge_regs *bridge = bc->base;
220 	int slot = PCI_SLOT(devfn);
221 	int fn = PCI_FUNC(devfn);
222 	int busno = bus->number;
223 	void *addr;
224 	u32 cf;
225 	int res;
226 
227 	bridge_write(bc, b_pci_cfg, (busno << 16) | (slot << 11));
228 	addr = &bridge->b_type1_cfg.c[(fn << 8) | PCI_VENDOR_ID];
229 	if (get_dbe(cf, (u32 *)addr))
230 		return PCIBIOS_DEVICE_NOT_FOUND;
231 
232 	/*
233 	 * IOC3 is broken beyond belief ...  Don't even give the
234 	 * generic PCI code a chance to look at it for real ...
235 	 */
236 	if (cf == (PCI_VENDOR_ID_SGI | (PCI_DEVICE_ID_SGI_IOC3 << 16))) {
237 		addr = &bridge->b_type0_cfg_dev[slot].f[fn].l[where >> 2];
238 		return ioc3_cfg_wr(addr, where, size, value);
239 	}
240 
241 	addr = &bridge->b_type1_cfg.c[(fn << 8) | (where ^ (4 - size))];
242 
243 	if (size == 1)
244 		res = put_dbe(value, (u8 *)addr);
245 	else if (size == 2)
246 		res = put_dbe(value, (u16 *)addr);
247 	else
248 		res = put_dbe(value, (u32 *)addr);
249 
250 	if (res)
251 		return PCIBIOS_DEVICE_NOT_FOUND;
252 
253 	return PCIBIOS_SUCCESSFUL;
254 }
255 
256 static int pci_write_config(struct pci_bus *bus, unsigned int devfn,
257 	int where, int size, u32 value)
258 {
259 	if (!pci_is_root_bus(bus))
260 		return pci_conf1_write_config(bus, devfn, where, size, value);
261 
262 	return pci_conf0_write_config(bus, devfn, where, size, value);
263 }
264 
265 static struct pci_ops bridge_pci_ops = {
266 	.read	 = pci_read_config,
267 	.write	 = pci_write_config,
268 };
269 
270 struct bridge_irq_chip_data {
271 	struct bridge_controller *bc;
272 	nasid_t nasid;
273 };
274 
275 static int bridge_set_affinity(struct irq_data *d, const struct cpumask *mask,
276 			       bool force)
277 {
278 #ifdef CONFIG_NUMA
279 	struct bridge_irq_chip_data *data = d->chip_data;
280 	int bit = d->parent_data->hwirq;
281 	int pin = d->hwirq;
282 	nasid_t nasid;
283 	int ret, cpu;
284 
285 	ret = irq_chip_set_affinity_parent(d, mask, force);
286 	if (ret >= 0) {
287 		cpu = cpumask_first_and(mask, cpu_online_mask);
288 		nasid = COMPACT_TO_NASID_NODEID(cpu_to_node(cpu));
289 		bridge_write(data->bc, b_int_addr[pin].addr,
290 			     (((data->bc->intr_addr >> 30) & 0x30000) |
291 			      bit | (nasid << 8)));
292 		bridge_read(data->bc, b_wid_tflush);
293 	}
294 	return ret;
295 #else
296 	return irq_chip_set_affinity_parent(d, mask, force);
297 #endif
298 }
299 
300 struct irq_chip bridge_irq_chip = {
301 	.name             = "BRIDGE",
302 	.irq_mask         = irq_chip_mask_parent,
303 	.irq_unmask       = irq_chip_unmask_parent,
304 	.irq_set_affinity = bridge_set_affinity
305 };
306 
307 static int bridge_domain_alloc(struct irq_domain *domain, unsigned int virq,
308 			       unsigned int nr_irqs, void *arg)
309 {
310 	struct bridge_irq_chip_data *data;
311 	struct irq_alloc_info *info = arg;
312 	int ret;
313 
314 	if (nr_irqs > 1 || !info)
315 		return -EINVAL;
316 
317 	data = kzalloc(sizeof(*data), GFP_KERNEL);
318 	if (!data)
319 		return -ENOMEM;
320 
321 	ret = irq_domain_alloc_irqs_parent(domain, virq, nr_irqs, arg);
322 	if (ret >= 0) {
323 		data->bc = info->ctrl;
324 		data->nasid = info->nasid;
325 		irq_domain_set_info(domain, virq, info->pin, &bridge_irq_chip,
326 				    data, handle_level_irq, NULL, NULL);
327 	} else {
328 		kfree(data);
329 	}
330 
331 	return ret;
332 }
333 
334 static void bridge_domain_free(struct irq_domain *domain, unsigned int virq,
335 			       unsigned int nr_irqs)
336 {
337 	struct irq_data *irqd = irq_domain_get_irq_data(domain, virq);
338 
339 	if (nr_irqs)
340 		return;
341 
342 	kfree(irqd->chip_data);
343 	irq_domain_free_irqs_top(domain, virq, nr_irqs);
344 }
345 
346 static int bridge_domain_activate(struct irq_domain *domain,
347 				  struct irq_data *irqd, bool reserve)
348 {
349 	struct bridge_irq_chip_data *data = irqd->chip_data;
350 	struct bridge_controller *bc = data->bc;
351 	int bit = irqd->parent_data->hwirq;
352 	int pin = irqd->hwirq;
353 	u32 device;
354 
355 	bridge_write(bc, b_int_addr[pin].addr,
356 		     (((bc->intr_addr >> 30) & 0x30000) |
357 		      bit | (data->nasid << 8)));
358 	bridge_set(bc, b_int_enable, (1 << pin));
359 	bridge_set(bc, b_int_enable, 0x7ffffe00); /* more stuff in int_enable */
360 
361 	/*
362 	 * Enable sending of an interrupt clear packt to the hub on a high to
363 	 * low transition of the interrupt pin.
364 	 *
365 	 * IRIX sets additional bits in the address which are documented as
366 	 * reserved in the bridge docs.
367 	 */
368 	bridge_set(bc, b_int_mode, (1UL << pin));
369 
370 	/*
371 	 * We assume the bridge to have a 1:1 mapping between devices
372 	 * (slots) and intr pins.
373 	 */
374 	device = bridge_read(bc, b_int_device);
375 	device &= ~(7 << (pin*3));
376 	device |= (pin << (pin*3));
377 	bridge_write(bc, b_int_device, device);
378 
379 	bridge_read(bc, b_wid_tflush);
380 	return 0;
381 }
382 
383 static void bridge_domain_deactivate(struct irq_domain *domain,
384 				     struct irq_data *irqd)
385 {
386 	struct bridge_irq_chip_data *data = irqd->chip_data;
387 
388 	bridge_clr(data->bc, b_int_enable, (1 << irqd->hwirq));
389 	bridge_read(data->bc, b_wid_tflush);
390 }
391 
392 static const struct irq_domain_ops bridge_domain_ops = {
393 	.alloc      = bridge_domain_alloc,
394 	.free       = bridge_domain_free,
395 	.activate   = bridge_domain_activate,
396 	.deactivate = bridge_domain_deactivate
397 };
398 
399 /*
400  * All observed requests have pin == 1. We could have a global here, that
401  * gets incremented and returned every time - unfortunately, pci_map_irq
402  * may be called on the same device over and over, and need to return the
403  * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7].
404  *
405  * A given PCI device, in general, should be able to intr any of the cpus
406  * on any one of the hubs connected to its xbow.
407  */
408 static int bridge_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
409 {
410 	struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus);
411 	struct irq_alloc_info info;
412 	int irq;
413 
414 	irq = bc->pci_int[slot];
415 	if (irq == -1) {
416 		info.ctrl = bc;
417 		info.nasid = bc->nasid;
418 		info.pin = slot;
419 
420 		irq = irq_domain_alloc_irqs(bc->domain, 1, bc->nasid, &info);
421 		if (irq < 0)
422 			return irq;
423 
424 		bc->pci_int[slot] = irq;
425 	}
426 	return irq;
427 }
428 
429 static int bridge_probe(struct platform_device *pdev)
430 {
431 	struct xtalk_bridge_platform_data *bd = dev_get_platdata(&pdev->dev);
432 	struct device *dev = &pdev->dev;
433 	struct bridge_controller *bc;
434 	struct pci_host_bridge *host;
435 	struct irq_domain *domain, *parent;
436 	struct fwnode_handle *fn;
437 	int slot;
438 	int err;
439 
440 	parent = irq_get_default_host();
441 	if (!parent)
442 		return -ENODEV;
443 	fn = irq_domain_alloc_named_fwnode("BRIDGE");
444 	if (!fn)
445 		return -ENOMEM;
446 	domain = irq_domain_create_hierarchy(parent, 0, 8, fn,
447 					     &bridge_domain_ops, NULL);
448 	irq_domain_free_fwnode(fn);
449 	if (!domain)
450 		return -ENOMEM;
451 
452 	pci_set_flags(PCI_PROBE_ONLY);
453 
454 	host = devm_pci_alloc_host_bridge(dev, sizeof(*bc));
455 	if (!host) {
456 		err = -ENOMEM;
457 		goto err_remove_domain;
458 	}
459 
460 	bc = pci_host_bridge_priv(host);
461 
462 	bc->busn.name		= "Bridge PCI busn";
463 	bc->busn.start		= 0;
464 	bc->busn.end		= 0xff;
465 	bc->busn.flags		= IORESOURCE_BUS;
466 
467 	bc->domain		= domain;
468 
469 	pci_add_resource_offset(&host->windows, &bd->mem, bd->mem_offset);
470 	pci_add_resource_offset(&host->windows, &bd->io, bd->io_offset);
471 	pci_add_resource(&host->windows, &bc->busn);
472 
473 	err = devm_request_pci_bus_resources(dev, &host->windows);
474 	if (err < 0)
475 		goto err_free_resource;
476 
477 	bc->nasid = bd->nasid;
478 
479 	bc->baddr = (u64)bd->masterwid << 60 | PCI64_ATTR_BAR;
480 	bc->base = (struct bridge_regs *)bd->bridge_addr;
481 	bc->intr_addr = bd->intr_addr;
482 
483 	/*
484 	 * Clear all pending interrupts.
485 	 */
486 	bridge_write(bc, b_int_rst_stat, BRIDGE_IRR_ALL_CLR);
487 
488 	/*
489 	 * Until otherwise set up, assume all interrupts are from slot 0
490 	 */
491 	bridge_write(bc, b_int_device, 0x0);
492 
493 	/*
494 	 * disable swapping for big windows
495 	 */
496 	bridge_clr(bc, b_wid_control,
497 		   BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP);
498 #ifdef CONFIG_PAGE_SIZE_4KB
499 	bridge_clr(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
500 #else /* 16kB or larger */
501 	bridge_set(bc, b_wid_control, BRIDGE_CTRL_PAGE_SIZE);
502 #endif
503 
504 	/*
505 	 * Hmm...  IRIX sets additional bits in the address which
506 	 * are documented as reserved in the bridge docs.
507 	 */
508 	bridge_write(bc, b_wid_int_upper,
509 		     ((bc->intr_addr >> 32) & 0xffff) | (bd->masterwid << 16));
510 	bridge_write(bc, b_wid_int_lower, bc->intr_addr & 0xffffffff);
511 	bridge_write(bc, b_dir_map, (bd->masterwid << 20));	/* DMA */
512 	bridge_write(bc, b_int_enable, 0);
513 
514 	for (slot = 0; slot < 8; slot++) {
515 		bridge_set(bc, b_device[slot].reg, BRIDGE_DEV_SWAP_DIR);
516 		bc->pci_int[slot] = -1;
517 	}
518 	bridge_read(bc, b_wid_tflush);	  /* wait until Bridge PIO complete */
519 
520 	host->dev.parent = dev;
521 	host->sysdata = bc;
522 	host->busnr = 0;
523 	host->ops = &bridge_pci_ops;
524 	host->map_irq = bridge_map_irq;
525 	host->swizzle_irq = pci_common_swizzle;
526 
527 	err = pci_scan_root_bus_bridge(host);
528 	if (err < 0)
529 		goto err_free_resource;
530 
531 	pci_bus_claim_resources(host->bus);
532 	pci_bus_add_devices(host->bus);
533 
534 	platform_set_drvdata(pdev, host->bus);
535 
536 	return 0;
537 
538 err_free_resource:
539 	pci_free_resource_list(&host->windows);
540 err_remove_domain:
541 	irq_domain_remove(domain);
542 	return err;
543 }
544 
545 static int bridge_remove(struct platform_device *pdev)
546 {
547 	struct pci_bus *bus = platform_get_drvdata(pdev);
548 	struct bridge_controller *bc = BRIDGE_CONTROLLER(bus);
549 
550 	irq_domain_remove(bc->domain);
551 	pci_lock_rescan_remove();
552 	pci_stop_root_bus(bus);
553 	pci_remove_root_bus(bus);
554 	pci_unlock_rescan_remove();
555 
556 	return 0;
557 }
558 
559 static struct platform_driver bridge_driver = {
560 	.probe  = bridge_probe,
561 	.remove = bridge_remove,
562 	.driver = {
563 		.name = "xtalk-bridge",
564 	}
565 };
566 
567 builtin_platform_driver(bridge_driver);
568