xref: /openbmc/linux/arch/mips/pci/pci-rt2880.c (revision 3cf3cdea) 
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Ralink RT288x SoC PCI register definitions
4  *
5  *  Copyright (C) 2009 John Crispin <john@phrozen.org>
6  *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
7  *
8  *  Parts of this file are based on Ralink's 2.6.21 BSP
9  */
10 
11 #include <linux/delay.h>
12 #include <linux/types.h>
13 #include <linux/pci.h>
14 #include <linux/io.h>
15 #include <linux/init.h>
16 #include <linux/of_platform.h>
17 #include <linux/of_irq.h>
18 #include <linux/of_pci.h>
19 
20 #include <asm/mach-ralink/rt288x.h>
21 
22 #define RT2880_PCI_BASE		0x00440000
23 #define RT288X_CPU_IRQ_PCI	4
24 
25 #define RT2880_PCI_MEM_BASE	0x20000000
26 #define RT2880_PCI_MEM_SIZE	0x10000000
27 #define RT2880_PCI_IO_BASE	0x00460000
28 #define RT2880_PCI_IO_SIZE	0x00010000
29 
30 #define RT2880_PCI_REG_PCICFG_ADDR	0x00
31 #define RT2880_PCI_REG_PCIMSK_ADDR	0x0c
32 #define RT2880_PCI_REG_BAR0SETUP_ADDR	0x10
33 #define RT2880_PCI_REG_IMBASEBAR0_ADDR	0x18
34 #define RT2880_PCI_REG_CONFIG_ADDR	0x20
35 #define RT2880_PCI_REG_CONFIG_DATA	0x24
36 #define RT2880_PCI_REG_MEMBASE		0x28
37 #define RT2880_PCI_REG_IOBASE		0x2c
38 #define RT2880_PCI_REG_ID		0x30
39 #define RT2880_PCI_REG_CLASS		0x34
40 #define RT2880_PCI_REG_SUBID		0x38
41 #define RT2880_PCI_REG_ARBCTL		0x80
42 
43 static void __iomem *rt2880_pci_base;
44 
45 static u32 rt2880_pci_reg_read(u32 reg)
46 {
47 	return readl(rt2880_pci_base + reg);
48 }
49 
50 static void rt2880_pci_reg_write(u32 val, u32 reg)
51 {
52 	writel(val, rt2880_pci_base + reg);
53 }
54 
55 static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot,
56 					 unsigned int func, unsigned int where)
57 {
58 	return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) |
59 		0x80000000);
60 }
61 
62 static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn,
63 				  int where, int size, u32 *val)
64 {
65 	u32 address;
66 	u32 data;
67 
68 	address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
69 					 PCI_FUNC(devfn), where);
70 
71 	rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
72 	data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
73 
74 	switch (size) {
75 	case 1:
76 		*val = (data >> ((where & 3) << 3)) & 0xff;
77 		break;
78 	case 2:
79 		*val = (data >> ((where & 3) << 3)) & 0xffff;
80 		break;
81 	case 4:
82 		*val = data;
83 		break;
84 	}
85 
86 	return PCIBIOS_SUCCESSFUL;
87 }
88 
89 static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn,
90 				   int where, int size, u32 val)
91 {
92 	u32 address;
93 	u32 data;
94 
95 	address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn),
96 					 PCI_FUNC(devfn), where);
97 
98 	rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
99 	data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
100 
101 	switch (size) {
102 	case 1:
103 		data = (data & ~(0xff << ((where & 3) << 3))) |
104 		       (val << ((where & 3) << 3));
105 		break;
106 	case 2:
107 		data = (data & ~(0xffff << ((where & 3) << 3))) |
108 		       (val << ((where & 3) << 3));
109 		break;
110 	case 4:
111 		data = val;
112 		break;
113 	}
114 
115 	rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA);
116 
117 	return PCIBIOS_SUCCESSFUL;
118 }
119 
120 static struct pci_ops rt2880_pci_ops = {
121 	.read	= rt2880_pci_config_read,
122 	.write	= rt2880_pci_config_write,
123 };
124 
125 static struct resource rt2880_pci_mem_resource = {
126 	.name	= "PCI MEM space",
127 	.start	= RT2880_PCI_MEM_BASE,
128 	.end	= RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1,
129 	.flags	= IORESOURCE_MEM,
130 };
131 
132 static struct resource rt2880_pci_io_resource = {
133 	.name	= "PCI IO space",
134 	.start	= RT2880_PCI_IO_BASE,
135 	.end	= RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1,
136 	.flags	= IORESOURCE_IO,
137 };
138 
139 static struct pci_controller rt2880_pci_controller = {
140 	.pci_ops	= &rt2880_pci_ops,
141 	.mem_resource	= &rt2880_pci_mem_resource,
142 	.io_resource	= &rt2880_pci_io_resource,
143 };
144 
145 static inline u32 rt2880_pci_read_u32(unsigned long reg)
146 {
147 	u32 address;
148 	u32 ret;
149 
150 	address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
151 
152 	rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
153 	ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA);
154 
155 	return ret;
156 }
157 
158 static inline void rt2880_pci_write_u32(unsigned long reg, u32 val)
159 {
160 	u32 address;
161 
162 	address = rt2880_pci_get_cfgaddr(0, 0, 0, reg);
163 
164 	rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR);
165 	rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA);
166 }
167 
168 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
169 {
170 	int irq = -1;
171 
172 	if (dev->bus->number != 0)
173 		return irq;
174 
175 	switch (PCI_SLOT(dev->devfn)) {
176 	case 0x00:
177 		break;
178 	case 0x11:
179 		irq = RT288X_CPU_IRQ_PCI;
180 		break;
181 	default:
182 		pr_err("%s:%s[%d] trying to alloc unknown pci irq\n",
183 		       __FILE__, __func__, __LINE__);
184 		BUG();
185 		break;
186 	}
187 
188 	return irq;
189 }
190 
191 static int rt288x_pci_probe(struct platform_device *pdev)
192 {
193 	void __iomem *io_map_base;
194 
195 	rt2880_pci_base = ioremap(RT2880_PCI_BASE, PAGE_SIZE);
196 
197 	io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE);
198 	rt2880_pci_controller.io_map_base = (unsigned long) io_map_base;
199 	set_io_port_base((unsigned long) io_map_base);
200 
201 	ioport_resource.start = RT2880_PCI_IO_BASE;
202 	ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1;
203 
204 	rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR);
205 	udelay(1);
206 
207 	rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL);
208 	rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR);
209 	rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE);
210 	rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE);
211 	rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR);
212 	rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID);
213 	rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS);
214 	rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID);
215 	rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR);
216 
217 	rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000);
218 	(void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0);
219 
220 	rt2880_pci_controller.of_node = pdev->dev.of_node;
221 
222 	register_pci_controller(&rt2880_pci_controller);
223 	return 0;
224 }
225 
226 int pcibios_plat_dev_init(struct pci_dev *dev)
227 {
228 	static bool slot0_init;
229 
230 	/*
231 	 * Nobody seems to initialize slot 0, but this platform requires it, so
232 	 * do it once when some other slot is being enabled. The PCI subsystem
233 	 * should configure other slots properly, so no need to do anything
234 	 * special for those.
235 	 */
236 	if (!slot0_init && dev->bus->number == 0) {
237 		u16 cmd;
238 		u32 bar0;
239 
240 		slot0_init = true;
241 
242 		pci_bus_write_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
243 					   0x08000000);
244 		pci_bus_read_config_dword(dev->bus, 0, PCI_BASE_ADDRESS_0,
245 					  &bar0);
246 
247 		pci_bus_read_config_word(dev->bus, 0, PCI_COMMAND, &cmd);
248 		cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
249 		pci_bus_write_config_word(dev->bus, 0, PCI_COMMAND, cmd);
250 	}
251 
252 	return 0;
253 }
254 
255 static const struct of_device_id rt288x_pci_match[] = {
256 	{ .compatible = "ralink,rt288x-pci" },
257 	{},
258 };
259 
260 static struct platform_driver rt288x_pci_driver = {
261 	.probe = rt288x_pci_probe,
262 	.driver = {
263 		.name = "rt288x-pci",
264 		.of_match_table = rt288x_pci_match,
265 	},
266 };
267 
268 int __init pcibios_init(void)
269 {
270 	int ret = platform_driver_register(&rt288x_pci_driver);
271 
272 	if (ret)
273 		pr_info("rt288x-pci: Error registering platform driver!");
274 
275 	return ret;
276 }
277 
278 arch_initcall(pcibios_init);
279