1 /* 2 * Ralink RT288x SoC PCI register definitions 3 * 4 * Copyright (C) 2009 John Crispin <john@phrozen.org> 5 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org> 6 * 7 * Parts of this file are based on Ralink's 2.6.21 BSP 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License version 2 as published 11 * by the Free Software Foundation. 12 */ 13 14 #include <linux/delay.h> 15 #include <linux/types.h> 16 #include <linux/pci.h> 17 #include <linux/io.h> 18 #include <linux/init.h> 19 #include <linux/module.h> 20 #include <linux/of_platform.h> 21 #include <linux/of_irq.h> 22 #include <linux/of_pci.h> 23 24 #include <asm/mach-ralink/rt288x.h> 25 26 #define RT2880_PCI_BASE 0x00440000 27 #define RT288X_CPU_IRQ_PCI 4 28 29 #define RT2880_PCI_MEM_BASE 0x20000000 30 #define RT2880_PCI_MEM_SIZE 0x10000000 31 #define RT2880_PCI_IO_BASE 0x00460000 32 #define RT2880_PCI_IO_SIZE 0x00010000 33 34 #define RT2880_PCI_REG_PCICFG_ADDR 0x00 35 #define RT2880_PCI_REG_PCIMSK_ADDR 0x0c 36 #define RT2880_PCI_REG_BAR0SETUP_ADDR 0x10 37 #define RT2880_PCI_REG_IMBASEBAR0_ADDR 0x18 38 #define RT2880_PCI_REG_CONFIG_ADDR 0x20 39 #define RT2880_PCI_REG_CONFIG_DATA 0x24 40 #define RT2880_PCI_REG_MEMBASE 0x28 41 #define RT2880_PCI_REG_IOBASE 0x2c 42 #define RT2880_PCI_REG_ID 0x30 43 #define RT2880_PCI_REG_CLASS 0x34 44 #define RT2880_PCI_REG_SUBID 0x38 45 #define RT2880_PCI_REG_ARBCTL 0x80 46 47 static void __iomem *rt2880_pci_base; 48 static DEFINE_SPINLOCK(rt2880_pci_lock); 49 50 static u32 rt2880_pci_reg_read(u32 reg) 51 { 52 return readl(rt2880_pci_base + reg); 53 } 54 55 static void rt2880_pci_reg_write(u32 val, u32 reg) 56 { 57 writel(val, rt2880_pci_base + reg); 58 } 59 60 static inline u32 rt2880_pci_get_cfgaddr(unsigned int bus, unsigned int slot, 61 unsigned int func, unsigned int where) 62 { 63 return ((bus << 16) | (slot << 11) | (func << 8) | (where & 0xfc) | 64 0x80000000); 65 } 66 67 static int rt2880_pci_config_read(struct pci_bus *bus, unsigned int devfn, 68 int where, int size, u32 *val) 69 { 70 unsigned long flags; 71 u32 address; 72 u32 data; 73 74 address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), 75 PCI_FUNC(devfn), where); 76 77 spin_lock_irqsave(&rt2880_pci_lock, flags); 78 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); 79 data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); 80 spin_unlock_irqrestore(&rt2880_pci_lock, flags); 81 82 switch (size) { 83 case 1: 84 *val = (data >> ((where & 3) << 3)) & 0xff; 85 break; 86 case 2: 87 *val = (data >> ((where & 3) << 3)) & 0xffff; 88 break; 89 case 4: 90 *val = data; 91 break; 92 } 93 94 return PCIBIOS_SUCCESSFUL; 95 } 96 97 static int rt2880_pci_config_write(struct pci_bus *bus, unsigned int devfn, 98 int where, int size, u32 val) 99 { 100 unsigned long flags; 101 u32 address; 102 u32 data; 103 104 address = rt2880_pci_get_cfgaddr(bus->number, PCI_SLOT(devfn), 105 PCI_FUNC(devfn), where); 106 107 spin_lock_irqsave(&rt2880_pci_lock, flags); 108 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); 109 data = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); 110 111 switch (size) { 112 case 1: 113 data = (data & ~(0xff << ((where & 3) << 3))) | 114 (val << ((where & 3) << 3)); 115 break; 116 case 2: 117 data = (data & ~(0xffff << ((where & 3) << 3))) | 118 (val << ((where & 3) << 3)); 119 break; 120 case 4: 121 data = val; 122 break; 123 } 124 125 rt2880_pci_reg_write(data, RT2880_PCI_REG_CONFIG_DATA); 126 spin_unlock_irqrestore(&rt2880_pci_lock, flags); 127 128 return PCIBIOS_SUCCESSFUL; 129 } 130 131 static struct pci_ops rt2880_pci_ops = { 132 .read = rt2880_pci_config_read, 133 .write = rt2880_pci_config_write, 134 }; 135 136 static struct resource rt2880_pci_mem_resource = { 137 .name = "PCI MEM space", 138 .start = RT2880_PCI_MEM_BASE, 139 .end = RT2880_PCI_MEM_BASE + RT2880_PCI_MEM_SIZE - 1, 140 .flags = IORESOURCE_MEM, 141 }; 142 143 static struct resource rt2880_pci_io_resource = { 144 .name = "PCI IO space", 145 .start = RT2880_PCI_IO_BASE, 146 .end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1, 147 .flags = IORESOURCE_IO, 148 }; 149 150 static struct pci_controller rt2880_pci_controller = { 151 .pci_ops = &rt2880_pci_ops, 152 .mem_resource = &rt2880_pci_mem_resource, 153 .io_resource = &rt2880_pci_io_resource, 154 }; 155 156 static inline u32 rt2880_pci_read_u32(unsigned long reg) 157 { 158 unsigned long flags; 159 u32 address; 160 u32 ret; 161 162 address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); 163 164 spin_lock_irqsave(&rt2880_pci_lock, flags); 165 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); 166 ret = rt2880_pci_reg_read(RT2880_PCI_REG_CONFIG_DATA); 167 spin_unlock_irqrestore(&rt2880_pci_lock, flags); 168 169 return ret; 170 } 171 172 static inline void rt2880_pci_write_u32(unsigned long reg, u32 val) 173 { 174 unsigned long flags; 175 u32 address; 176 177 address = rt2880_pci_get_cfgaddr(0, 0, 0, reg); 178 179 spin_lock_irqsave(&rt2880_pci_lock, flags); 180 rt2880_pci_reg_write(address, RT2880_PCI_REG_CONFIG_ADDR); 181 rt2880_pci_reg_write(val, RT2880_PCI_REG_CONFIG_DATA); 182 spin_unlock_irqrestore(&rt2880_pci_lock, flags); 183 } 184 185 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 186 { 187 u16 cmd; 188 int irq = -1; 189 190 if (dev->bus->number != 0) 191 return irq; 192 193 switch (PCI_SLOT(dev->devfn)) { 194 case 0x00: 195 rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); 196 (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); 197 break; 198 case 0x11: 199 irq = RT288X_CPU_IRQ_PCI; 200 break; 201 default: 202 pr_err("%s:%s[%d] trying to alloc unknown pci irq\n", 203 __FILE__, __func__, __LINE__); 204 BUG(); 205 break; 206 } 207 208 pci_write_config_byte((struct pci_dev *) dev, 209 PCI_CACHE_LINE_SIZE, 0x14); 210 pci_write_config_byte((struct pci_dev *) dev, PCI_LATENCY_TIMER, 0xFF); 211 pci_read_config_word((struct pci_dev *) dev, PCI_COMMAND, &cmd); 212 cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 213 PCI_COMMAND_INVALIDATE | PCI_COMMAND_FAST_BACK | 214 PCI_COMMAND_SERR | PCI_COMMAND_WAIT | PCI_COMMAND_PARITY; 215 pci_write_config_word((struct pci_dev *) dev, PCI_COMMAND, cmd); 216 pci_write_config_byte((struct pci_dev *) dev, PCI_INTERRUPT_LINE, 217 dev->irq); 218 return irq; 219 } 220 221 static int rt288x_pci_probe(struct platform_device *pdev) 222 { 223 void __iomem *io_map_base; 224 225 rt2880_pci_base = ioremap_nocache(RT2880_PCI_BASE, PAGE_SIZE); 226 227 io_map_base = ioremap(RT2880_PCI_IO_BASE, RT2880_PCI_IO_SIZE); 228 rt2880_pci_controller.io_map_base = (unsigned long) io_map_base; 229 set_io_port_base((unsigned long) io_map_base); 230 231 ioport_resource.start = RT2880_PCI_IO_BASE; 232 ioport_resource.end = RT2880_PCI_IO_BASE + RT2880_PCI_IO_SIZE - 1; 233 234 rt2880_pci_reg_write(0, RT2880_PCI_REG_PCICFG_ADDR); 235 udelay(1); 236 237 rt2880_pci_reg_write(0x79, RT2880_PCI_REG_ARBCTL); 238 rt2880_pci_reg_write(0x07FF0001, RT2880_PCI_REG_BAR0SETUP_ADDR); 239 rt2880_pci_reg_write(RT2880_PCI_MEM_BASE, RT2880_PCI_REG_MEMBASE); 240 rt2880_pci_reg_write(RT2880_PCI_IO_BASE, RT2880_PCI_REG_IOBASE); 241 rt2880_pci_reg_write(0x08000000, RT2880_PCI_REG_IMBASEBAR0_ADDR); 242 rt2880_pci_reg_write(0x08021814, RT2880_PCI_REG_ID); 243 rt2880_pci_reg_write(0x00800001, RT2880_PCI_REG_CLASS); 244 rt2880_pci_reg_write(0x28801814, RT2880_PCI_REG_SUBID); 245 rt2880_pci_reg_write(0x000c0000, RT2880_PCI_REG_PCIMSK_ADDR); 246 247 rt2880_pci_write_u32(PCI_BASE_ADDRESS_0, 0x08000000); 248 (void) rt2880_pci_read_u32(PCI_BASE_ADDRESS_0); 249 250 register_pci_controller(&rt2880_pci_controller); 251 return 0; 252 } 253 254 int pcibios_plat_dev_init(struct pci_dev *dev) 255 { 256 return 0; 257 } 258 259 static const struct of_device_id rt288x_pci_match[] = { 260 { .compatible = "ralink,rt288x-pci" }, 261 {}, 262 }; 263 MODULE_DEVICE_TABLE(of, rt288x_pci_match); 264 265 static struct platform_driver rt288x_pci_driver = { 266 .probe = rt288x_pci_probe, 267 .driver = { 268 .name = "rt288x-pci", 269 .of_match_table = rt288x_pci_match, 270 }, 271 }; 272 273 int __init pcibios_init(void) 274 { 275 int ret = platform_driver_register(&rt288x_pci_driver); 276 277 if (ret) 278 pr_info("rt288x-pci: Error registering platform driver!"); 279 280 return ret; 281 } 282 283 arch_initcall(pcibios_init); 284