1 /* 2 * Ralink MT7620A SoC PCI support 3 * 4 * Copyright (C) 2007-2013 Bruce Chang (Mediatek) 5 * Copyright (C) 2013-2016 John Crispin <blogic@openwrt.org> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms of the GNU General Public License version 2 as published 9 * by the Free Software Foundation. 10 */ 11 12 #include <linux/types.h> 13 #include <linux/pci.h> 14 #include <linux/io.h> 15 #include <linux/init.h> 16 #include <linux/delay.h> 17 #include <linux/interrupt.h> 18 #include <linux/module.h> 19 #include <linux/of.h> 20 #include <linux/of_irq.h> 21 #include <linux/of_pci.h> 22 #include <linux/reset.h> 23 #include <linux/platform_device.h> 24 25 #include <asm/mach-ralink/ralink_regs.h> 26 #include <asm/mach-ralink/mt7620.h> 27 28 #define RALINK_PCI_IO_MAP_BASE 0x10160000 29 #define RALINK_PCI_MEMORY_BASE 0x0 30 31 #define RALINK_INT_PCIE0 4 32 33 #define RALINK_CLKCFG1 0x30 34 #define RALINK_GPIOMODE 0x60 35 36 #define PPLL_CFG1 0x9c 37 #define PDRV_SW_SET BIT(23) 38 39 #define PPLL_DRV 0xa0 40 #define PDRV_SW_SET (1<<31) 41 #define LC_CKDRVPD (1<<19) 42 #define LC_CKDRVOHZ (1<<18) 43 #define LC_CKDRVHZ (1<<17) 44 #define LC_CKTEST (1<<16) 45 46 /* PCI Bridge registers */ 47 #define RALINK_PCI_PCICFG_ADDR 0x00 48 #define PCIRST BIT(1) 49 50 #define RALINK_PCI_PCIENA 0x0C 51 #define PCIINT2 BIT(20) 52 53 #define RALINK_PCI_CONFIG_ADDR 0x20 54 #define RALINK_PCI_CONFIG_DATA_VIRT_REG 0x24 55 #define RALINK_PCI_MEMBASE 0x28 56 #define RALINK_PCI_IOBASE 0x2C 57 58 /* PCI RC registers */ 59 #define RALINK_PCI0_BAR0SETUP_ADDR 0x10 60 #define RALINK_PCI0_IMBASEBAR0_ADDR 0x18 61 #define RALINK_PCI0_ID 0x30 62 #define RALINK_PCI0_CLASS 0x34 63 #define RALINK_PCI0_SUBID 0x38 64 #define RALINK_PCI0_STATUS 0x50 65 #define PCIE_LINK_UP_ST BIT(0) 66 67 #define PCIEPHY0_CFG 0x90 68 69 #define RALINK_PCIEPHY_P0_CTL_OFFSET 0x7498 70 #define RALINK_PCIE0_CLK_EN (1 << 26) 71 72 #define BUSY 0x80000000 73 #define WAITRETRY_MAX 10 74 #define WRITE_MODE (1UL << 23) 75 #define DATA_SHIFT 0 76 #define ADDR_SHIFT 8 77 78 79 static void __iomem *bridge_base; 80 static void __iomem *pcie_base; 81 82 static struct reset_control *rstpcie0; 83 84 static inline void bridge_w32(u32 val, unsigned reg) 85 { 86 iowrite32(val, bridge_base + reg); 87 } 88 89 static inline u32 bridge_r32(unsigned reg) 90 { 91 return ioread32(bridge_base + reg); 92 } 93 94 static inline void pcie_w32(u32 val, unsigned reg) 95 { 96 iowrite32(val, pcie_base + reg); 97 } 98 99 static inline u32 pcie_r32(unsigned reg) 100 { 101 return ioread32(pcie_base + reg); 102 } 103 104 static inline void pcie_m32(u32 clr, u32 set, unsigned reg) 105 { 106 u32 val = pcie_r32(reg); 107 108 val &= ~clr; 109 val |= set; 110 pcie_w32(val, reg); 111 } 112 113 static int wait_pciephy_busy(void) 114 { 115 unsigned long reg_value = 0x0, retry = 0; 116 117 while (1) { 118 reg_value = pcie_r32(PCIEPHY0_CFG); 119 120 if (reg_value & BUSY) 121 mdelay(100); 122 else 123 break; 124 if (retry++ > WAITRETRY_MAX) { 125 printk(KERN_WARN "PCIE-PHY retry failed.\n"); 126 return -1; 127 } 128 } 129 return 0; 130 } 131 132 static void pcie_phy(unsigned long addr, unsigned long val) 133 { 134 wait_pciephy_busy(); 135 pcie_w32(WRITE_MODE | (val << DATA_SHIFT) | (addr << ADDR_SHIFT), 136 PCIEPHY0_CFG); 137 mdelay(1); 138 wait_pciephy_busy(); 139 } 140 141 static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where, 142 int size, u32 *val) 143 { 144 unsigned int slot = PCI_SLOT(devfn); 145 u8 func = PCI_FUNC(devfn); 146 u32 address; 147 u32 data; 148 u32 num = 0; 149 150 if (bus) 151 num = bus->number; 152 153 address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | 154 (func << 8) | (where & 0xfc) | 0x80000000; 155 bridge_w32(address, RALINK_PCI_CONFIG_ADDR); 156 data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG); 157 158 switch (size) { 159 case 1: 160 *val = (data >> ((where & 3) << 3)) & 0xff; 161 break; 162 case 2: 163 *val = (data >> ((where & 3) << 3)) & 0xffff; 164 break; 165 case 4: 166 *val = data; 167 break; 168 } 169 170 return PCIBIOS_SUCCESSFUL; 171 } 172 173 static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where, 174 int size, u32 val) 175 { 176 unsigned int slot = PCI_SLOT(devfn); 177 u8 func = PCI_FUNC(devfn); 178 u32 address; 179 u32 data; 180 u32 num = 0; 181 182 if (bus) 183 num = bus->number; 184 185 address = (((where & 0xF00) >> 8) << 24) | (num << 16) | (slot << 11) | 186 (func << 8) | (where & 0xfc) | 0x80000000; 187 bridge_w32(address, RALINK_PCI_CONFIG_ADDR); 188 data = bridge_r32(RALINK_PCI_CONFIG_DATA_VIRT_REG); 189 190 switch (size) { 191 case 1: 192 data = (data & ~(0xff << ((where & 3) << 3))) | 193 (val << ((where & 3) << 3)); 194 break; 195 case 2: 196 data = (data & ~(0xffff << ((where & 3) << 3))) | 197 (val << ((where & 3) << 3)); 198 break; 199 case 4: 200 data = val; 201 break; 202 } 203 204 bridge_w32(data, RALINK_PCI_CONFIG_DATA_VIRT_REG); 205 206 return PCIBIOS_SUCCESSFUL; 207 } 208 209 struct pci_ops mt7620_pci_ops = { 210 .read = pci_config_read, 211 .write = pci_config_write, 212 }; 213 214 static struct resource mt7620_res_pci_mem1; 215 static struct resource mt7620_res_pci_io1; 216 struct pci_controller mt7620_controller = { 217 .pci_ops = &mt7620_pci_ops, 218 .mem_resource = &mt7620_res_pci_mem1, 219 .mem_offset = 0x00000000UL, 220 .io_resource = &mt7620_res_pci_io1, 221 .io_offset = 0x00000000UL, 222 .io_map_base = 0xa0000000, 223 }; 224 225 static int mt7620_pci_hw_init(struct platform_device *pdev) 226 { 227 /* bypass PCIe DLL */ 228 pcie_phy(0x0, 0x80); 229 pcie_phy(0x1, 0x04); 230 231 /* Elastic buffer control */ 232 pcie_phy(0x68, 0xB4); 233 234 /* put core into reset */ 235 pcie_m32(0, PCIRST, RALINK_PCI_PCICFG_ADDR); 236 reset_control_assert(rstpcie0); 237 238 /* disable power and all clocks */ 239 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); 240 rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV); 241 242 /* bring core out of reset */ 243 reset_control_deassert(rstpcie0); 244 rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); 245 mdelay(100); 246 247 if (!(rt_sysc_r32(PPLL_CFG1) & PDRV_SW_SET)) { 248 dev_err(&pdev->dev, "MT7620 PPLL unlock\n"); 249 reset_control_assert(rstpcie0); 250 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); 251 return -1; 252 } 253 254 /* power up the bus */ 255 rt_sysc_m32(LC_CKDRVHZ | LC_CKDRVOHZ, LC_CKDRVPD | PDRV_SW_SET, 256 PPLL_DRV); 257 258 return 0; 259 } 260 261 static int mt7628_pci_hw_init(struct platform_device *pdev) 262 { 263 u32 val = 0; 264 265 /* bring the core out of reset */ 266 rt_sysc_m32(BIT(16), 0, RALINK_GPIOMODE); 267 reset_control_deassert(rstpcie0); 268 269 /* enable the pci clk */ 270 rt_sysc_m32(0, RALINK_PCIE0_CLK_EN, RALINK_CLKCFG1); 271 mdelay(100); 272 273 /* voodoo from the SDK driver */ 274 pcie_m32(~0xff, 0x5, RALINK_PCIEPHY_P0_CTL_OFFSET); 275 276 pci_config_read(NULL, 0, 0x70c, 4, &val); 277 val &= ~(0xff) << 8; 278 val |= 0x50 << 8; 279 pci_config_write(NULL, 0, 0x70c, 4, val); 280 281 pci_config_read(NULL, 0, 0x70c, 4, &val); 282 dev_err(&pdev->dev, "Port 0 N_FTS = %x\n", (unsigned int) val); 283 284 return 0; 285 } 286 287 static int mt7620_pci_probe(struct platform_device *pdev) 288 { 289 struct resource *bridge_res = platform_get_resource(pdev, 290 IORESOURCE_MEM, 0); 291 struct resource *pcie_res = platform_get_resource(pdev, 292 IORESOURCE_MEM, 1); 293 u32 val = 0; 294 295 rstpcie0 = devm_reset_control_get(&pdev->dev, "pcie0"); 296 if (IS_ERR(rstpcie0)) 297 return PTR_ERR(rstpcie0); 298 299 bridge_base = devm_ioremap_resource(&pdev->dev, bridge_res); 300 if (!bridge_base) 301 return -ENOMEM; 302 303 pcie_base = devm_ioremap_resource(&pdev->dev, pcie_res); 304 if (!pcie_base) 305 return -ENOMEM; 306 307 iomem_resource.start = 0; 308 iomem_resource.end = ~0; 309 ioport_resource.start = 0; 310 ioport_resource.end = ~0; 311 312 /* bring up the pci core */ 313 switch (ralink_soc) { 314 case MT762X_SOC_MT7620A: 315 if (mt7620_pci_hw_init(pdev)) 316 return -1; 317 break; 318 319 case MT762X_SOC_MT7628AN: 320 if (mt7628_pci_hw_init(pdev)) 321 return -1; 322 break; 323 324 default: 325 dev_err(&pdev->dev, "pcie is not supported on this hardware\n"); 326 return -1; 327 } 328 mdelay(50); 329 330 /* enable write access */ 331 pcie_m32(PCIRST, 0, RALINK_PCI_PCICFG_ADDR); 332 mdelay(100); 333 334 /* check if there is a card present */ 335 if ((pcie_r32(RALINK_PCI0_STATUS) & PCIE_LINK_UP_ST) == 0) { 336 reset_control_assert(rstpcie0); 337 rt_sysc_m32(RALINK_PCIE0_CLK_EN, 0, RALINK_CLKCFG1); 338 if (ralink_soc == MT762X_SOC_MT7620A) 339 rt_sysc_m32(LC_CKDRVPD, PDRV_SW_SET, PPLL_DRV); 340 dev_err(&pdev->dev, "PCIE0 no card, disable it(RST&CLK)\n"); 341 return -1; 342 } 343 344 /* setup ranges */ 345 bridge_w32(0xffffffff, RALINK_PCI_MEMBASE); 346 bridge_w32(RALINK_PCI_IO_MAP_BASE, RALINK_PCI_IOBASE); 347 348 pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); 349 pcie_w32(RALINK_PCI_MEMORY_BASE, RALINK_PCI0_IMBASEBAR0_ADDR); 350 pcie_w32(0x06040001, RALINK_PCI0_CLASS); 351 352 /* enable interrupts */ 353 pcie_m32(0, PCIINT2, RALINK_PCI_PCIENA); 354 355 /* voodoo from the SDK driver */ 356 pci_config_read(NULL, 0, 4, 4, &val); 357 pci_config_write(NULL, 0, 4, 4, val | 0x7); 358 359 pci_load_of_ranges(&mt7620_controller, pdev->dev.of_node); 360 register_pci_controller(&mt7620_controller); 361 362 return 0; 363 } 364 365 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 366 { 367 u16 cmd; 368 u32 val; 369 int irq = 0; 370 371 if ((dev->bus->number == 0) && (slot == 0)) { 372 pcie_w32(0x7FFF0001, RALINK_PCI0_BAR0SETUP_ADDR); 373 pci_config_write(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, 374 RALINK_PCI_MEMORY_BASE); 375 pci_config_read(dev->bus, 0, PCI_BASE_ADDRESS_0, 4, &val); 376 } else if ((dev->bus->number == 1) && (slot == 0x0)) { 377 irq = RALINK_INT_PCIE0; 378 } else { 379 dev_err(&dev->dev, "no irq found - bus=0x%x, slot = 0x%x\n", 380 dev->bus->number, slot); 381 return 0; 382 } 383 dev_err(&dev->dev, "card - bus=0x%x, slot = 0x%x irq=%d\n", 384 dev->bus->number, slot, irq); 385 386 /* configure the cache line size to 0x14 */ 387 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x14); 388 389 /* configure latency timer to 0xff */ 390 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0xff); 391 pci_read_config_word(dev, PCI_COMMAND, &cmd); 392 393 /* setup the slot */ 394 cmd = cmd | PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY; 395 pci_write_config_word(dev, PCI_COMMAND, cmd); 396 pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); 397 398 return irq; 399 } 400 401 int pcibios_plat_dev_init(struct pci_dev *dev) 402 { 403 return 0; 404 } 405 406 static const struct of_device_id mt7620_pci_ids[] = { 407 { .compatible = "mediatek,mt7620-pci" }, 408 {}, 409 }; 410 MODULE_DEVICE_TABLE(of, mt7620_pci_ids); 411 412 static struct platform_driver mt7620_pci_driver = { 413 .probe = mt7620_pci_probe, 414 .driver = { 415 .name = "mt7620-pci", 416 .owner = THIS_MODULE, 417 .of_match_table = of_match_ptr(mt7620_pci_ids), 418 }, 419 }; 420 421 static int __init mt7620_pci_init(void) 422 { 423 return platform_driver_register(&mt7620_pci_driver); 424 } 425 426 arch_initcall(mt7620_pci_init); 427