1 /* 2 * This program is free software; you can redistribute it and/or modify it 3 * under the terms of the GNU General Public License version 2 as published 4 * by the Free Software Foundation. 5 * 6 * Copyright (C) 2010 John Crispin <john@phrozen.org> 7 */ 8 9 #include <linux/types.h> 10 #include <linux/pci.h> 11 #include <linux/kernel.h> 12 #include <linux/init.h> 13 #include <linux/delay.h> 14 #include <linux/mm.h> 15 #include <linux/vmalloc.h> 16 #include <linux/module.h> 17 #include <linux/clk.h> 18 #include <linux/of_platform.h> 19 #include <linux/of_gpio.h> 20 #include <linux/of_irq.h> 21 #include <linux/of_pci.h> 22 23 #include <asm/addrspace.h> 24 25 #include <lantiq_soc.h> 26 #include <lantiq_irq.h> 27 28 #include "pci-lantiq.h" 29 30 #define PCI_CR_FCI_ADDR_MAP0 0x00C0 31 #define PCI_CR_FCI_ADDR_MAP1 0x00C4 32 #define PCI_CR_FCI_ADDR_MAP2 0x00C8 33 #define PCI_CR_FCI_ADDR_MAP3 0x00CC 34 #define PCI_CR_FCI_ADDR_MAP4 0x00D0 35 #define PCI_CR_FCI_ADDR_MAP5 0x00D4 36 #define PCI_CR_FCI_ADDR_MAP6 0x00D8 37 #define PCI_CR_FCI_ADDR_MAP7 0x00DC 38 #define PCI_CR_CLK_CTRL 0x0000 39 #define PCI_CR_PCI_MOD 0x0030 40 #define PCI_CR_PC_ARB 0x0080 41 #define PCI_CR_FCI_ADDR_MAP11hg 0x00E4 42 #define PCI_CR_BAR11MASK 0x0044 43 #define PCI_CR_BAR12MASK 0x0048 44 #define PCI_CR_BAR13MASK 0x004C 45 #define PCI_CS_BASE_ADDR1 0x0010 46 #define PCI_CR_PCI_ADDR_MAP11 0x0064 47 #define PCI_CR_FCI_BURST_LENGTH 0x00E8 48 #define PCI_CR_PCI_EOI 0x002C 49 #define PCI_CS_STS_CMD 0x0004 50 51 #define PCI_MASTER0_REQ_MASK_2BITS 8 52 #define PCI_MASTER1_REQ_MASK_2BITS 10 53 #define PCI_MASTER2_REQ_MASK_2BITS 12 54 #define INTERNAL_ARB_ENABLE_BIT 0 55 56 #define LTQ_CGU_IFCCR 0x0018 57 #define LTQ_CGU_PCICR 0x0034 58 59 #define ltq_pci_w32(x, y) ltq_w32((x), ltq_pci_membase + (y)) 60 #define ltq_pci_r32(x) ltq_r32(ltq_pci_membase + (x)) 61 62 #define ltq_pci_cfg_w32(x, y) ltq_w32((x), ltq_pci_mapped_cfg + (y)) 63 #define ltq_pci_cfg_r32(x) ltq_r32(ltq_pci_mapped_cfg + (x)) 64 65 __iomem void *ltq_pci_mapped_cfg; 66 static __iomem void *ltq_pci_membase; 67 68 static int reset_gpio; 69 static struct clk *clk_pci, *clk_external; 70 static struct resource pci_io_resource; 71 static struct resource pci_mem_resource; 72 static struct pci_ops pci_ops = { 73 .read = ltq_pci_read_config_dword, 74 .write = ltq_pci_write_config_dword 75 }; 76 77 static struct pci_controller pci_controller = { 78 .pci_ops = &pci_ops, 79 .mem_resource = &pci_mem_resource, 80 .mem_offset = 0x00000000UL, 81 .io_resource = &pci_io_resource, 82 .io_offset = 0x00000000UL, 83 }; 84 85 static inline u32 ltq_calc_bar11mask(void) 86 { 87 u32 mem, bar11mask; 88 89 /* BAR11MASK value depends on available memory on system. */ 90 mem = get_num_physpages() * PAGE_SIZE; 91 bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8; 92 93 return bar11mask; 94 } 95 96 static int ltq_pci_startup(struct platform_device *pdev) 97 { 98 struct device_node *node = pdev->dev.of_node; 99 const __be32 *req_mask, *bus_clk; 100 u32 temp_buffer; 101 102 /* get our clocks */ 103 clk_pci = clk_get(&pdev->dev, NULL); 104 if (IS_ERR(clk_pci)) { 105 dev_err(&pdev->dev, "failed to get pci clock\n"); 106 return PTR_ERR(clk_pci); 107 } 108 109 clk_external = clk_get(&pdev->dev, "external"); 110 if (IS_ERR(clk_external)) { 111 clk_put(clk_pci); 112 dev_err(&pdev->dev, "failed to get external pci clock\n"); 113 return PTR_ERR(clk_external); 114 } 115 116 /* read the bus speed that we want */ 117 bus_clk = of_get_property(node, "lantiq,bus-clock", NULL); 118 if (bus_clk) 119 clk_set_rate(clk_pci, *bus_clk); 120 121 /* and enable the clocks */ 122 clk_enable(clk_pci); 123 if (of_find_property(node, "lantiq,external-clock", NULL)) 124 clk_enable(clk_external); 125 else 126 clk_disable(clk_external); 127 128 /* setup reset gpio used by pci */ 129 reset_gpio = of_get_named_gpio(node, "gpio-reset", 0); 130 if (gpio_is_valid(reset_gpio)) { 131 int ret = devm_gpio_request(&pdev->dev, 132 reset_gpio, "pci-reset"); 133 if (ret) { 134 dev_err(&pdev->dev, 135 "failed to request gpio %d\n", reset_gpio); 136 return ret; 137 } 138 gpio_direction_output(reset_gpio, 1); 139 } 140 141 /* enable auto-switching between PCI and EBU */ 142 ltq_pci_w32(0xa, PCI_CR_CLK_CTRL); 143 144 /* busy, i.e. configuration is not done, PCI access has to be retried */ 145 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD); 146 wmb(); 147 /* BUS Master/IO/MEM access */ 148 ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD); 149 150 /* enable external 2 PCI masters */ 151 temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB); 152 /* setup the request mask */ 153 req_mask = of_get_property(node, "req-mask", NULL); 154 if (req_mask) 155 temp_buffer &= ~((*req_mask & 0xf) << 16); 156 else 157 temp_buffer &= ~0xf0000; 158 /* enable internal arbiter */ 159 temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT); 160 /* enable internal PCI master reqest */ 161 temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS)); 162 163 /* enable EBU request */ 164 temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS)); 165 166 /* enable all external masters request */ 167 temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS)); 168 ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB); 169 wmb(); 170 171 /* setup BAR memory regions */ 172 ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0); 173 ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1); 174 ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2); 175 ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3); 176 ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4); 177 ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5); 178 ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6); 179 ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7); 180 ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg); 181 ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK); 182 ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11); 183 ltq_pci_w32(0, PCI_CS_BASE_ADDR1); 184 /* both TX and RX endian swap are enabled */ 185 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI); 186 wmb(); 187 ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000, 188 PCI_CR_BAR12MASK); 189 ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000, 190 PCI_CR_BAR13MASK); 191 /*use 8 dw burst length */ 192 ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH); 193 ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD); 194 wmb(); 195 196 /* setup irq line */ 197 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON); 198 ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN); 199 200 /* toggle reset pin */ 201 if (gpio_is_valid(reset_gpio)) { 202 __gpio_set_value(reset_gpio, 0); 203 wmb(); 204 mdelay(1); 205 __gpio_set_value(reset_gpio, 1); 206 } 207 return 0; 208 } 209 210 static int ltq_pci_probe(struct platform_device *pdev) 211 { 212 struct resource *res_cfg, *res_bridge; 213 214 pci_clear_flags(PCI_PROBE_ONLY); 215 216 res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1); 217 ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge); 218 if (IS_ERR(ltq_pci_membase)) 219 return PTR_ERR(ltq_pci_membase); 220 221 res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0); 222 ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg); 223 if (IS_ERR(ltq_pci_mapped_cfg)) 224 return PTR_ERR(ltq_pci_mapped_cfg); 225 226 ltq_pci_startup(pdev); 227 228 pci_load_of_ranges(&pci_controller, pdev->dev.of_node); 229 register_pci_controller(&pci_controller); 230 return 0; 231 } 232 233 static const struct of_device_id ltq_pci_match[] = { 234 { .compatible = "lantiq,pci-xway" }, 235 {}, 236 }; 237 MODULE_DEVICE_TABLE(of, ltq_pci_match); 238 239 static struct platform_driver ltq_pci_driver = { 240 .probe = ltq_pci_probe, 241 .driver = { 242 .name = "pci-xway", 243 .of_match_table = ltq_pci_match, 244 }, 245 }; 246 247 int __init pcibios_init(void) 248 { 249 int ret = platform_driver_register(<q_pci_driver); 250 if (ret) 251 pr_info("pci-xway: Error registering platform driver!"); 252 return ret; 253 } 254 255 arch_initcall(pcibios_init); 256