xref: /openbmc/linux/arch/mips/pci/pci-lantiq.c (revision abb84c46)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *
4  *  Copyright (C) 2010 John Crispin <john@phrozen.org>
5  */
6 
7 #include <linux/types.h>
8 #include <linux/pci.h>
9 #include <linux/kernel.h>
10 #include <linux/init.h>
11 #include <linux/delay.h>
12 #include <linux/gpio/consumer.h>
13 #include <linux/mm.h>
14 #include <linux/vmalloc.h>
15 #include <linux/clk.h>
16 #include <linux/of.h>
17 #include <linux/of_pci.h>
18 #include <linux/platform_device.h>
19 
20 #include <asm/addrspace.h>
21 
22 #include <lantiq_soc.h>
23 #include <lantiq_irq.h>
24 
25 #include "pci-lantiq.h"
26 
27 #define PCI_CR_FCI_ADDR_MAP0		0x00C0
28 #define PCI_CR_FCI_ADDR_MAP1		0x00C4
29 #define PCI_CR_FCI_ADDR_MAP2		0x00C8
30 #define PCI_CR_FCI_ADDR_MAP3		0x00CC
31 #define PCI_CR_FCI_ADDR_MAP4		0x00D0
32 #define PCI_CR_FCI_ADDR_MAP5		0x00D4
33 #define PCI_CR_FCI_ADDR_MAP6		0x00D8
34 #define PCI_CR_FCI_ADDR_MAP7		0x00DC
35 #define PCI_CR_CLK_CTRL			0x0000
36 #define PCI_CR_PCI_MOD			0x0030
37 #define PCI_CR_PC_ARB			0x0080
38 #define PCI_CR_FCI_ADDR_MAP11hg		0x00E4
39 #define PCI_CR_BAR11MASK		0x0044
40 #define PCI_CR_BAR12MASK		0x0048
41 #define PCI_CR_BAR13MASK		0x004C
42 #define PCI_CS_BASE_ADDR1		0x0010
43 #define PCI_CR_PCI_ADDR_MAP11		0x0064
44 #define PCI_CR_FCI_BURST_LENGTH		0x00E8
45 #define PCI_CR_PCI_EOI			0x002C
46 #define PCI_CS_STS_CMD			0x0004
47 
48 #define PCI_MASTER0_REQ_MASK_2BITS	8
49 #define PCI_MASTER1_REQ_MASK_2BITS	10
50 #define PCI_MASTER2_REQ_MASK_2BITS	12
51 #define INTERNAL_ARB_ENABLE_BIT		0
52 
53 #define LTQ_CGU_IFCCR		0x0018
54 #define LTQ_CGU_PCICR		0x0034
55 
56 #define ltq_pci_w32(x, y)	ltq_w32((x), ltq_pci_membase + (y))
57 #define ltq_pci_r32(x)		ltq_r32(ltq_pci_membase + (x))
58 
59 #define ltq_pci_cfg_w32(x, y)	ltq_w32((x), ltq_pci_mapped_cfg + (y))
60 #define ltq_pci_cfg_r32(x)	ltq_r32(ltq_pci_mapped_cfg + (x))
61 
62 __iomem void *ltq_pci_mapped_cfg;
63 static __iomem void *ltq_pci_membase;
64 
65 static struct gpio_desc *reset_gpio;
66 static struct clk *clk_pci, *clk_external;
67 static struct resource pci_io_resource;
68 static struct resource pci_mem_resource;
69 static struct pci_ops pci_ops = {
70 	.read	= ltq_pci_read_config_dword,
71 	.write	= ltq_pci_write_config_dword
72 };
73 
74 static struct pci_controller pci_controller = {
75 	.pci_ops	= &pci_ops,
76 	.mem_resource	= &pci_mem_resource,
77 	.mem_offset	= 0x00000000UL,
78 	.io_resource	= &pci_io_resource,
79 	.io_offset	= 0x00000000UL,
80 };
81 
82 static inline u32 ltq_calc_bar11mask(void)
83 {
84 	u32 mem, bar11mask;
85 
86 	/* BAR11MASK value depends on available memory on system. */
87 	mem = get_num_physpages() * PAGE_SIZE;
88 	bar11mask = (0x0ffffff0 & ~((1 << (fls(mem) - 1)) - 1)) | 8;
89 
90 	return bar11mask;
91 }
92 
93 static int ltq_pci_startup(struct platform_device *pdev)
94 {
95 	struct device_node *node = pdev->dev.of_node;
96 	const __be32 *req_mask, *bus_clk;
97 	u32 temp_buffer;
98 	int error;
99 
100 	/* get our clocks */
101 	clk_pci = clk_get(&pdev->dev, NULL);
102 	if (IS_ERR(clk_pci)) {
103 		dev_err(&pdev->dev, "failed to get pci clock\n");
104 		return PTR_ERR(clk_pci);
105 	}
106 
107 	clk_external = clk_get(&pdev->dev, "external");
108 	if (IS_ERR(clk_external)) {
109 		clk_put(clk_pci);
110 		dev_err(&pdev->dev, "failed to get external pci clock\n");
111 		return PTR_ERR(clk_external);
112 	}
113 
114 	/* read the bus speed that we want */
115 	bus_clk = of_get_property(node, "lantiq,bus-clock", NULL);
116 	if (bus_clk)
117 		clk_set_rate(clk_pci, *bus_clk);
118 
119 	/* and enable the clocks */
120 	clk_enable(clk_pci);
121 	if (of_property_read_bool(node, "lantiq,external-clock"))
122 		clk_enable(clk_external);
123 	else
124 		clk_disable(clk_external);
125 
126 	/* setup reset gpio used by pci */
127 	reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", GPIOD_ASIS);
128 	error = PTR_ERR_OR_ZERO(reset_gpio);
129 	if (error) {
130 		dev_err(&pdev->dev, "failed to request gpio: %d\n", error);
131 		return error;
132 	}
133 	gpiod_set_consumer_name(reset_gpio, "pci_reset");
134 	gpiod_direction_output(reset_gpio, 1);
135 
136 	/* enable auto-switching between PCI and EBU */
137 	ltq_pci_w32(0xa, PCI_CR_CLK_CTRL);
138 
139 	/* busy, i.e. configuration is not done, PCI access has to be retried */
140 	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
141 	wmb();
142 	/* BUS Master/IO/MEM access */
143 	ltq_pci_cfg_w32(ltq_pci_cfg_r32(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
144 
145 	/* enable external 2 PCI masters */
146 	temp_buffer = ltq_pci_r32(PCI_CR_PC_ARB);
147 	/* setup the request mask */
148 	req_mask = of_get_property(node, "req-mask", NULL);
149 	if (req_mask)
150 		temp_buffer &= ~((*req_mask & 0xf) << 16);
151 	else
152 		temp_buffer &= ~0xf0000;
153 	/* enable internal arbiter */
154 	temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
155 	/* enable internal PCI master reqest */
156 	temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
157 
158 	/* enable EBU request */
159 	temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
160 
161 	/* enable all external masters request */
162 	temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
163 	ltq_pci_w32(temp_buffer, PCI_CR_PC_ARB);
164 	wmb();
165 
166 	/* setup BAR memory regions */
167 	ltq_pci_w32(0x18000000, PCI_CR_FCI_ADDR_MAP0);
168 	ltq_pci_w32(0x18400000, PCI_CR_FCI_ADDR_MAP1);
169 	ltq_pci_w32(0x18800000, PCI_CR_FCI_ADDR_MAP2);
170 	ltq_pci_w32(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
171 	ltq_pci_w32(0x19000000, PCI_CR_FCI_ADDR_MAP4);
172 	ltq_pci_w32(0x19400000, PCI_CR_FCI_ADDR_MAP5);
173 	ltq_pci_w32(0x19800000, PCI_CR_FCI_ADDR_MAP6);
174 	ltq_pci_w32(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
175 	ltq_pci_w32(0x1ae00000, PCI_CR_FCI_ADDR_MAP11hg);
176 	ltq_pci_w32(ltq_calc_bar11mask(), PCI_CR_BAR11MASK);
177 	ltq_pci_w32(0, PCI_CR_PCI_ADDR_MAP11);
178 	ltq_pci_w32(0, PCI_CS_BASE_ADDR1);
179 	/* both TX and RX endian swap are enabled */
180 	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_EOI) | 3, PCI_CR_PCI_EOI);
181 	wmb();
182 	ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR12MASK) | 0x80000000,
183 		PCI_CR_BAR12MASK);
184 	ltq_pci_w32(ltq_pci_r32(PCI_CR_BAR13MASK) | 0x80000000,
185 		PCI_CR_BAR13MASK);
186 	/*use 8 dw burst length */
187 	ltq_pci_w32(0x303, PCI_CR_FCI_BURST_LENGTH);
188 	ltq_pci_w32(ltq_pci_r32(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
189 	wmb();
190 
191 	/* setup irq line */
192 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_CON) | 0xc, LTQ_EBU_PCC_CON);
193 	ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_PCC_IEN) | 0x10, LTQ_EBU_PCC_IEN);
194 
195 	/* toggle reset pin */
196 	if (reset_gpio) {
197 		gpiod_set_value_cansleep(reset_gpio, 0);
198 		wmb();
199 		mdelay(1);
200 		gpiod_set_value_cansleep(reset_gpio, 1);
201 	}
202 	return 0;
203 }
204 
205 static int ltq_pci_probe(struct platform_device *pdev)
206 {
207 	pci_clear_flags(PCI_PROBE_ONLY);
208 
209 	ltq_pci_membase = devm_platform_get_and_ioremap_resource(pdev, 1, NULL);
210 	if (IS_ERR(ltq_pci_membase))
211 		return PTR_ERR(ltq_pci_membase);
212 
213 	ltq_pci_mapped_cfg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
214 	if (IS_ERR(ltq_pci_mapped_cfg))
215 		return PTR_ERR(ltq_pci_mapped_cfg);
216 
217 	ltq_pci_startup(pdev);
218 
219 	pci_load_of_ranges(&pci_controller, pdev->dev.of_node);
220 	register_pci_controller(&pci_controller);
221 	return 0;
222 }
223 
224 static const struct of_device_id ltq_pci_match[] = {
225 	{ .compatible = "lantiq,pci-xway" },
226 	{},
227 };
228 
229 static struct platform_driver ltq_pci_driver = {
230 	.probe = ltq_pci_probe,
231 	.driver = {
232 		.name = "pci-xway",
233 		.of_match_table = ltq_pci_match,
234 	},
235 };
236 
237 int __init pcibios_init(void)
238 {
239 	int ret = platform_driver_register(&ltq_pci_driver);
240 	if (ret)
241 		pr_info("pci-xway: Error registering platform driver!");
242 	return ret;
243 }
244 
245 arch_initcall(pcibios_init);
246