1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2003 Christoph Hellwig (hch@lst.de) 7 * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) 8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc. 9 */ 10 #include <linux/kernel.h> 11 #include <linux/export.h> 12 #include <linux/pci.h> 13 #include <linux/smp.h> 14 #include <linux/dma-direct.h> 15 #include <asm/sn/arch.h> 16 #include <asm/pci/bridge.h> 17 #include <asm/paccess.h> 18 #include <asm/sn/intr.h> 19 #include <asm/sn/sn0/hub.h> 20 21 /* 22 * Max #PCI busses we can handle; ie, max #PCI bridges. 23 */ 24 #define MAX_PCI_BUSSES 40 25 26 /* 27 * Max #PCI devices (like scsi controllers) we handle on a bus. 28 */ 29 #define MAX_DEVICES_PER_PCIBUS 8 30 31 /* 32 * XXX: No kmalloc available when we do our crosstalk scan, 33 * we should try to move it later in the boot process. 34 */ 35 static struct bridge_controller bridges[MAX_PCI_BUSSES]; 36 37 /* 38 * Translate from irq to software PCI bus number and PCI slot. 39 */ 40 struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; 41 int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; 42 43 extern struct pci_ops bridge_pci_ops; 44 45 int bridge_probe(nasid_t nasid, int widget_id, int masterwid) 46 { 47 unsigned long offset = NODE_OFFSET(nasid); 48 struct bridge_controller *bc; 49 static int num_bridges = 0; 50 bridge_t *bridge; 51 int slot; 52 53 pci_set_flags(PCI_PROBE_ONLY); 54 55 printk("a bridge\n"); 56 57 /* XXX: kludge alert.. */ 58 if (!num_bridges) 59 ioport_resource.end = ~0UL; 60 61 bc = &bridges[num_bridges]; 62 63 bc->pc.pci_ops = &bridge_pci_ops; 64 bc->pc.mem_resource = &bc->mem; 65 bc->pc.io_resource = &bc->io; 66 67 bc->pc.index = num_bridges; 68 69 bc->mem.name = "Bridge PCI MEM"; 70 bc->pc.mem_offset = offset; 71 bc->mem.start = 0; 72 bc->mem.end = ~0UL; 73 bc->mem.flags = IORESOURCE_MEM; 74 75 bc->io.name = "Bridge IO MEM"; 76 bc->pc.io_offset = offset; 77 bc->io.start = 0UL; 78 bc->io.end = ~0UL; 79 bc->io.flags = IORESOURCE_IO; 80 81 bc->irq_cpu = smp_processor_id(); 82 bc->widget_id = widget_id; 83 bc->nasid = nasid; 84 85 bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR; 86 87 /* 88 * point to this bridge 89 */ 90 bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id); 91 92 /* 93 * Clear all pending interrupts. 94 */ 95 bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR; 96 97 /* 98 * Until otherwise set up, assume all interrupts are from slot 0 99 */ 100 bridge->b_int_device = 0x0; 101 102 /* 103 * swap pio's to pci mem and io space (big windows) 104 */ 105 bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | 106 BRIDGE_CTRL_MEM_SWAP; 107 #ifdef CONFIG_PAGE_SIZE_4KB 108 bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; 109 #else /* 16kB or larger */ 110 bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE; 111 #endif 112 113 /* 114 * Hmm... IRIX sets additional bits in the address which 115 * are documented as reserved in the bridge docs. 116 */ 117 bridge->b_wid_int_upper = 0x8000 | (masterwid << 16); 118 bridge->b_wid_int_lower = 0x01800090; /* PI_INT_PEND_MOD off*/ 119 bridge->b_dir_map = (masterwid << 20); /* DMA */ 120 bridge->b_int_enable = 0; 121 122 for (slot = 0; slot < 8; slot ++) { 123 bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; 124 bc->pci_int[slot] = -1; 125 } 126 bridge->b_wid_tflush; /* wait until Bridge PIO complete */ 127 128 bc->base = bridge; 129 130 register_pci_controller(&bc->pc); 131 132 num_bridges++; 133 134 return 0; 135 } 136 137 /* 138 * All observed requests have pin == 1. We could have a global here, that 139 * gets incremented and returned every time - unfortunately, pci_map_irq 140 * may be called on the same device over and over, and need to return the 141 * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7]. 142 * 143 * A given PCI device, in general, should be able to intr any of the cpus 144 * on any one of the hubs connected to its xbow. 145 */ 146 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 147 { 148 return 0; 149 } 150 151 static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) 152 { 153 while (dev->bus->parent) { 154 /* Move up the chain of bridges. */ 155 dev = dev->bus->self; 156 } 157 158 return dev; 159 } 160 161 /* Do platform specific device initialization at pci_enable_device() time */ 162 int pcibios_plat_dev_init(struct pci_dev *dev) 163 { 164 struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); 165 struct pci_dev *rdev = bridge_root_dev(dev); 166 int slot = PCI_SLOT(rdev->devfn); 167 int irq; 168 169 irq = bc->pci_int[slot]; 170 if (irq == -1) { 171 irq = request_bridge_irq(bc); 172 if (irq < 0) 173 return irq; 174 175 bc->pci_int[slot] = irq; 176 } 177 178 irq_to_bridge[irq] = bc; 179 irq_to_slot[irq] = slot; 180 181 dev->irq = irq; 182 183 return 0; 184 } 185 186 dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) 187 { 188 struct pci_dev *pdev = to_pci_dev(dev); 189 struct bridge_controller *bc = BRIDGE_CONTROLLER(pdev->bus); 190 191 return bc->baddr + paddr; 192 } 193 194 phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dma_addr) 195 { 196 return dma_addr & ~(0xffUL << 56); 197 } 198 199 /* 200 * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses 201 * to find the slot number in sense of the bridge device register. 202 * XXX This also means multiple devices might rely on conflicting bridge 203 * settings. 204 */ 205 206 static inline void pci_disable_swapping(struct pci_dev *dev) 207 { 208 struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); 209 bridge_t *bridge = bc->base; 210 int slot = PCI_SLOT(dev->devfn); 211 212 /* Turn off byte swapping */ 213 bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR; 214 bridge->b_widget.w_tflush; /* Flush */ 215 } 216 217 static void pci_fixup_ioc3(struct pci_dev *d) 218 { 219 pci_disable_swapping(d); 220 } 221 222 #ifdef CONFIG_NUMA 223 int pcibus_to_node(struct pci_bus *bus) 224 { 225 struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); 226 227 return bc->nasid; 228 } 229 EXPORT_SYMBOL(pcibus_to_node); 230 #endif /* CONFIG_NUMA */ 231 232 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, 233 pci_fixup_ioc3); 234