1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2003 Christoph Hellwig (hch@lst.de) 7 * Copyright (C) 1999, 2000, 04 Ralf Baechle (ralf@linux-mips.org) 8 * Copyright (C) 1999, 2000 Silicon Graphics, Inc. 9 */ 10 #include <linux/kernel.h> 11 #include <linux/export.h> 12 #include <linux/pci.h> 13 #include <linux/smp.h> 14 #include <asm/sn/arch.h> 15 #include <asm/pci/bridge.h> 16 #include <asm/paccess.h> 17 #include <asm/sn/intr.h> 18 #include <asm/sn/sn0/hub.h> 19 20 /* 21 * Max #PCI busses we can handle; ie, max #PCI bridges. 22 */ 23 #define MAX_PCI_BUSSES 40 24 25 /* 26 * Max #PCI devices (like scsi controllers) we handle on a bus. 27 */ 28 #define MAX_DEVICES_PER_PCIBUS 8 29 30 /* 31 * XXX: No kmalloc available when we do our crosstalk scan, 32 * we should try to move it later in the boot process. 33 */ 34 static struct bridge_controller bridges[MAX_PCI_BUSSES]; 35 36 /* 37 * Translate from irq to software PCI bus number and PCI slot. 38 */ 39 struct bridge_controller *irq_to_bridge[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; 40 int irq_to_slot[MAX_PCI_BUSSES * MAX_DEVICES_PER_PCIBUS]; 41 42 extern struct pci_ops bridge_pci_ops; 43 44 int bridge_probe(nasid_t nasid, int widget_id, int masterwid) 45 { 46 unsigned long offset = NODE_OFFSET(nasid); 47 struct bridge_controller *bc; 48 static int num_bridges = 0; 49 bridge_t *bridge; 50 int slot; 51 52 pci_set_flags(PCI_PROBE_ONLY); 53 54 printk("a bridge\n"); 55 56 /* XXX: kludge alert.. */ 57 if (!num_bridges) 58 ioport_resource.end = ~0UL; 59 60 bc = &bridges[num_bridges]; 61 62 bc->pc.pci_ops = &bridge_pci_ops; 63 bc->pc.mem_resource = &bc->mem; 64 bc->pc.io_resource = &bc->io; 65 66 bc->pc.index = num_bridges; 67 68 bc->mem.name = "Bridge PCI MEM"; 69 bc->pc.mem_offset = offset; 70 bc->mem.start = 0; 71 bc->mem.end = ~0UL; 72 bc->mem.flags = IORESOURCE_MEM; 73 74 bc->io.name = "Bridge IO MEM"; 75 bc->pc.io_offset = offset; 76 bc->io.start = 0UL; 77 bc->io.end = ~0UL; 78 bc->io.flags = IORESOURCE_IO; 79 80 bc->irq_cpu = smp_processor_id(); 81 bc->widget_id = widget_id; 82 bc->nasid = nasid; 83 84 bc->baddr = (u64)masterwid << 60 | PCI64_ATTR_BAR; 85 86 /* 87 * point to this bridge 88 */ 89 bridge = (bridge_t *) RAW_NODE_SWIN_BASE(nasid, widget_id); 90 91 /* 92 * Clear all pending interrupts. 93 */ 94 bridge->b_int_rst_stat = BRIDGE_IRR_ALL_CLR; 95 96 /* 97 * Until otherwise set up, assume all interrupts are from slot 0 98 */ 99 bridge->b_int_device = 0x0; 100 101 /* 102 * swap pio's to pci mem and io space (big windows) 103 */ 104 bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | 105 BRIDGE_CTRL_MEM_SWAP; 106 #ifdef CONFIG_PAGE_SIZE_4KB 107 bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; 108 #else /* 16kB or larger */ 109 bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE; 110 #endif 111 112 /* 113 * Hmm... IRIX sets additional bits in the address which 114 * are documented as reserved in the bridge docs. 115 */ 116 bridge->b_wid_int_upper = 0x8000 | (masterwid << 16); 117 bridge->b_wid_int_lower = 0x01800090; /* PI_INT_PEND_MOD off*/ 118 bridge->b_dir_map = (masterwid << 20); /* DMA */ 119 bridge->b_int_enable = 0; 120 121 for (slot = 0; slot < 8; slot ++) { 122 bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; 123 bc->pci_int[slot] = -1; 124 } 125 bridge->b_wid_tflush; /* wait until Bridge PIO complete */ 126 127 bc->base = bridge; 128 129 register_pci_controller(&bc->pc); 130 131 num_bridges++; 132 133 return 0; 134 } 135 136 /* 137 * All observed requests have pin == 1. We could have a global here, that 138 * gets incremented and returned every time - unfortunately, pci_map_irq 139 * may be called on the same device over and over, and need to return the 140 * same value. On O2000, pin can be 0 or 1, and PCI slots can be [0..7]. 141 * 142 * A given PCI device, in general, should be able to intr any of the cpus 143 * on any one of the hubs connected to its xbow. 144 */ 145 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 146 { 147 return 0; 148 } 149 150 static inline struct pci_dev *bridge_root_dev(struct pci_dev *dev) 151 { 152 while (dev->bus->parent) { 153 /* Move up the chain of bridges. */ 154 dev = dev->bus->self; 155 } 156 157 return dev; 158 } 159 160 /* Do platform specific device initialization at pci_enable_device() time */ 161 int pcibios_plat_dev_init(struct pci_dev *dev) 162 { 163 struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); 164 struct pci_dev *rdev = bridge_root_dev(dev); 165 int slot = PCI_SLOT(rdev->devfn); 166 int irq; 167 168 irq = bc->pci_int[slot]; 169 if (irq == -1) { 170 irq = request_bridge_irq(bc); 171 if (irq < 0) 172 return irq; 173 174 bc->pci_int[slot] = irq; 175 } 176 177 irq_to_bridge[irq] = bc; 178 irq_to_slot[irq] = slot; 179 180 dev->irq = irq; 181 182 return 0; 183 } 184 185 /* 186 * Device might live on a subordinate PCI bus. XXX Walk up the chain of buses 187 * to find the slot number in sense of the bridge device register. 188 * XXX This also means multiple devices might rely on conflicting bridge 189 * settings. 190 */ 191 192 static inline void pci_disable_swapping(struct pci_dev *dev) 193 { 194 struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); 195 bridge_t *bridge = bc->base; 196 int slot = PCI_SLOT(dev->devfn); 197 198 /* Turn off byte swapping */ 199 bridge->b_device[slot].reg &= ~BRIDGE_DEV_SWAP_DIR; 200 bridge->b_widget.w_tflush; /* Flush */ 201 } 202 203 static inline void pci_enable_swapping(struct pci_dev *dev) 204 { 205 struct bridge_controller *bc = BRIDGE_CONTROLLER(dev->bus); 206 bridge_t *bridge = bc->base; 207 int slot = PCI_SLOT(dev->devfn); 208 209 /* Turn on byte swapping */ 210 bridge->b_device[slot].reg |= BRIDGE_DEV_SWAP_DIR; 211 bridge->b_widget.w_tflush; /* Flush */ 212 } 213 214 static void pci_fixup_ioc3(struct pci_dev *d) 215 { 216 pci_disable_swapping(d); 217 } 218 219 #ifdef CONFIG_NUMA 220 int pcibus_to_node(struct pci_bus *bus) 221 { 222 struct bridge_controller *bc = BRIDGE_CONTROLLER(bus); 223 224 return bc->nasid; 225 } 226 EXPORT_SYMBOL(pcibus_to_node); 227 #endif /* CONFIG_NUMA */ 228 229 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SGI, PCI_DEVICE_ID_SGI_IOC3, 230 pci_fixup_ioc3); 231