xref: /openbmc/linux/arch/mips/pci/pci-bcm1480ht.c (revision 9cfc5c90)
1 /*
2  * Copyright (C) 2001,2002,2005 Broadcom Corporation
3  * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org)
4  *
5  * This program is free software; you can redistribute it and/or
6  * modify it under the terms of the GNU General Public License
7  * as published by the Free Software Foundation; either version 2
8  * of the License, or (at your option) any later version.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public License
16  * along with this program; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
18  */
19 
20 /*
21  * BCM1480/1455-specific HT support (looking like PCI)
22  *
23  * This module provides the glue between Linux's PCI subsystem
24  * and the hardware.  We basically provide glue for accessing
25  * configuration space, and set up the translation for I/O
26  * space accesses.
27  *
28  * To access configuration space, we use ioremap.  In the 32-bit
29  * kernel, this consumes either 4 or 8 page table pages, and 16MB of
30  * kernel mapped memory.  Hopefully neither of these should be a huge
31  * problem.
32  *
33  */
34 #include <linux/types.h>
35 #include <linux/pci.h>
36 #include <linux/kernel.h>
37 #include <linux/init.h>
38 #include <linux/mm.h>
39 #include <linux/console.h>
40 #include <linux/tty.h>
41 
42 #include <asm/sibyte/bcm1480_regs.h>
43 #include <asm/sibyte/bcm1480_scd.h>
44 #include <asm/sibyte/board.h>
45 #include <asm/io.h>
46 
47 /*
48  * Macros for calculating offsets into config space given a device
49  * structure or dev/fun/reg
50  */
51 #define CFGOFFSET(bus, devfn, where) (((bus)<<16)+((devfn)<<8)+(where))
52 #define CFGADDR(bus, devfn, where)   CFGOFFSET((bus)->number, (devfn), where)
53 
54 static void *ht_cfg_space;
55 
56 #define PCI_BUS_ENABLED 1
57 #define PCI_DEVICE_MODE 2
58 
59 static int bcm1480ht_bus_status;
60 
61 #define PCI_BRIDGE_DEVICE  0
62 #define HT_BRIDGE_DEVICE   1
63 
64 /*
65  * HT's level-sensitive interrupts require EOI, which is generated
66  * through a 4MB memory-mapped region
67  */
68 unsigned long ht_eoi_space;
69 
70 /*
71  * Read/write 32-bit values in config space.
72  */
73 static inline u32 READCFG32(u32 addr)
74 {
75 	return *(u32 *)(ht_cfg_space + (addr&~3));
76 }
77 
78 static inline void WRITECFG32(u32 addr, u32 data)
79 {
80 	*(u32 *)(ht_cfg_space + (addr & ~3)) = data;
81 }
82 
83 /*
84  * Some checks before doing config cycles:
85  * In PCI Device Mode, hide everything on bus 0 except the LDT host
86  * bridge.  Otherwise, access is controlled by bridge MasterEn bits.
87  */
88 static int bcm1480ht_can_access(struct pci_bus *bus, int devfn)
89 {
90 	u32 devno;
91 
92 	if (!(bcm1480ht_bus_status & (PCI_BUS_ENABLED | PCI_DEVICE_MODE)))
93 		return 0;
94 
95 	if (bus->number == 0) {
96 		devno = PCI_SLOT(devfn);
97 		if (bcm1480ht_bus_status & PCI_DEVICE_MODE)
98 			return 0;
99 	}
100 	return 1;
101 }
102 
103 /*
104  * Read/write access functions for various sizes of values
105  * in config space.  Return all 1's for disallowed accesses
106  * for a kludgy but adequate simulation of master aborts.
107  */
108 
109 static int bcm1480ht_pcibios_read(struct pci_bus *bus, unsigned int devfn,
110 				  int where, int size, u32 * val)
111 {
112 	u32 data = 0;
113 
114 	if ((size == 2) && (where & 1))
115 		return PCIBIOS_BAD_REGISTER_NUMBER;
116 	else if ((size == 4) && (where & 3))
117 		return PCIBIOS_BAD_REGISTER_NUMBER;
118 
119 	if (bcm1480ht_can_access(bus, devfn))
120 		data = READCFG32(CFGADDR(bus, devfn, where));
121 	else
122 		data = 0xFFFFFFFF;
123 
124 	if (size == 1)
125 		*val = (data >> ((where & 3) << 3)) & 0xff;
126 	else if (size == 2)
127 		*val = (data >> ((where & 3) << 3)) & 0xffff;
128 	else
129 		*val = data;
130 
131 	return PCIBIOS_SUCCESSFUL;
132 }
133 
134 static int bcm1480ht_pcibios_write(struct pci_bus *bus, unsigned int devfn,
135 				   int where, int size, u32 val)
136 {
137 	u32 cfgaddr = CFGADDR(bus, devfn, where);
138 	u32 data = 0;
139 
140 	if ((size == 2) && (where & 1))
141 		return PCIBIOS_BAD_REGISTER_NUMBER;
142 	else if ((size == 4) && (where & 3))
143 		return PCIBIOS_BAD_REGISTER_NUMBER;
144 
145 	if (!bcm1480ht_can_access(bus, devfn))
146 		return PCIBIOS_BAD_REGISTER_NUMBER;
147 
148 	data = READCFG32(cfgaddr);
149 
150 	if (size == 1)
151 		data = (data & ~(0xff << ((where & 3) << 3))) |
152 		    (val << ((where & 3) << 3));
153 	else if (size == 2)
154 		data = (data & ~(0xffff << ((where & 3) << 3))) |
155 		    (val << ((where & 3) << 3));
156 	else
157 		data = val;
158 
159 	WRITECFG32(cfgaddr, data);
160 
161 	return PCIBIOS_SUCCESSFUL;
162 }
163 
164 static int bcm1480ht_pcibios_get_busno(void)
165 {
166 	return 0;
167 }
168 
169 struct pci_ops bcm1480ht_pci_ops = {
170 	.read	= bcm1480ht_pcibios_read,
171 	.write	= bcm1480ht_pcibios_write,
172 };
173 
174 static struct resource bcm1480ht_mem_resource = {
175 	.name	= "BCM1480 HT MEM",
176 	.start	= A_BCM1480_PHYS_HT_MEM_MATCH_BYTES,
177 	.end	= A_BCM1480_PHYS_HT_MEM_MATCH_BYTES + 0x1fffffffUL,
178 	.flags	= IORESOURCE_MEM,
179 };
180 
181 static struct resource bcm1480ht_io_resource = {
182 	.name	= "BCM1480 HT I/O",
183 	.start	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
184 	.end	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES + 0x01ffffffUL,
185 	.flags	= IORESOURCE_IO,
186 };
187 
188 struct pci_controller bcm1480ht_controller = {
189 	.pci_ops	= &bcm1480ht_pci_ops,
190 	.mem_resource	= &bcm1480ht_mem_resource,
191 	.io_resource	= &bcm1480ht_io_resource,
192 	.index		= 1,
193 	.get_busno	= bcm1480ht_pcibios_get_busno,
194 	.io_offset	= A_BCM1480_PHYS_HT_IO_MATCH_BYTES,
195 };
196 
197 static int __init bcm1480ht_pcibios_init(void)
198 {
199 	ht_cfg_space = ioremap(A_BCM1480_PHYS_HT_CFG_MATCH_BITS, 16*1024*1024);
200 
201 	/* CFE doesn't always init all HT paths, so we always scan */
202 	bcm1480ht_bus_status |= PCI_BUS_ENABLED;
203 
204 	ht_eoi_space = (unsigned long)
205 		ioremap(A_BCM1480_PHYS_HT_SPECIAL_MATCH_BYTES,
206 			4 * 1024 * 1024);
207 	bcm1480ht_controller.io_map_base = (unsigned long)
208 		ioremap(A_BCM1480_PHYS_HT_IO_MATCH_BYTES, 65536);
209 	bcm1480ht_controller.io_map_base -= bcm1480ht_controller.io_offset;
210 
211 	register_pci_controller(&bcm1480ht_controller);
212 
213 	return 0;
214 }
215 
216 arch_initcall(bcm1480ht_pcibios_init);
217