1 /* 2 * This file is subject to the terms and conditions of the GNU General Public 3 * License. See the file "COPYING" in the main directory of this archive 4 * for more details. 5 * 6 * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> 7 */ 8 9 #include <linux/types.h> 10 #include <linux/pci.h> 11 #include <linux/kernel.h> 12 #include <linux/delay.h> 13 #include <linux/io.h> 14 15 #include "pci-bcm63xx.h" 16 17 /* 18 * swizzle 32bits data to return only the needed part 19 */ 20 static int postprocess_read(u32 data, int where, unsigned int size) 21 { 22 u32 ret; 23 24 ret = 0; 25 switch (size) { 26 case 1: 27 ret = (data >> ((where & 3) << 3)) & 0xff; 28 break; 29 case 2: 30 ret = (data >> ((where & 3) << 3)) & 0xffff; 31 break; 32 case 4: 33 ret = data; 34 break; 35 } 36 return ret; 37 } 38 39 static int preprocess_write(u32 orig_data, u32 val, int where, 40 unsigned int size) 41 { 42 u32 ret; 43 44 ret = 0; 45 switch (size) { 46 case 1: 47 ret = (orig_data & ~(0xff << ((where & 3) << 3))) | 48 (val << ((where & 3) << 3)); 49 break; 50 case 2: 51 ret = (orig_data & ~(0xffff << ((where & 3) << 3))) | 52 (val << ((where & 3) << 3)); 53 break; 54 case 4: 55 ret = val; 56 break; 57 } 58 return ret; 59 } 60 61 /* 62 * setup hardware for a configuration cycle with given parameters 63 */ 64 static int bcm63xx_setup_cfg_access(int type, unsigned int busn, 65 unsigned int devfn, int where) 66 { 67 unsigned int slot, func, reg; 68 u32 val; 69 70 slot = PCI_SLOT(devfn); 71 func = PCI_FUNC(devfn); 72 reg = where >> 2; 73 74 /* sanity check */ 75 if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT)) 76 return 1; 77 78 if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT)) 79 return 1; 80 81 if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT)) 82 return 1; 83 84 /* ok, setup config access */ 85 val = (reg << MPI_L2PCFG_REG_SHIFT); 86 val |= (func << MPI_L2PCFG_FUNC_SHIFT); 87 val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT); 88 val |= MPI_L2PCFG_CFG_USEREG_MASK; 89 val |= MPI_L2PCFG_CFG_SEL_MASK; 90 /* type 0 cycle for local bus, type 1 cycle for anything else */ 91 if (type != 0) { 92 /* FIXME: how to specify bus ??? */ 93 val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT); 94 } 95 bcm_mpi_writel(val, MPI_L2PCFG_REG); 96 97 return 0; 98 } 99 100 static int bcm63xx_do_cfg_read(int type, unsigned int busn, 101 unsigned int devfn, int where, int size, 102 u32 *val) 103 { 104 u32 data; 105 106 /* two phase cycle, first we write address, then read data at 107 * another location, caller already has a spinlock so no need 108 * to add one here */ 109 if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) 110 return PCIBIOS_DEVICE_NOT_FOUND; 111 iob(); 112 data = le32_to_cpu(__raw_readl(pci_iospace_start)); 113 /* restore IO space normal behaviour */ 114 bcm_mpi_writel(0, MPI_L2PCFG_REG); 115 116 *val = postprocess_read(data, where, size); 117 118 return PCIBIOS_SUCCESSFUL; 119 } 120 121 static int bcm63xx_do_cfg_write(int type, unsigned int busn, 122 unsigned int devfn, int where, int size, 123 u32 val) 124 { 125 u32 data; 126 127 /* two phase cycle, first we write address, then write data to 128 * another location, caller already has a spinlock so no need 129 * to add one here */ 130 if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) 131 return PCIBIOS_DEVICE_NOT_FOUND; 132 iob(); 133 134 data = le32_to_cpu(__raw_readl(pci_iospace_start)); 135 data = preprocess_write(data, val, where, size); 136 137 __raw_writel(cpu_to_le32(data), pci_iospace_start); 138 wmb(); 139 /* no way to know the access is done, we have to wait */ 140 udelay(500); 141 /* restore IO space normal behaviour */ 142 bcm_mpi_writel(0, MPI_L2PCFG_REG); 143 144 return PCIBIOS_SUCCESSFUL; 145 } 146 147 static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn, 148 int where, int size, u32 *val) 149 { 150 int type; 151 152 type = bus->parent ? 1 : 0; 153 154 if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) 155 return PCIBIOS_DEVICE_NOT_FOUND; 156 157 return bcm63xx_do_cfg_read(type, bus->number, devfn, 158 where, size, val); 159 } 160 161 static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn, 162 int where, int size, u32 val) 163 { 164 int type; 165 166 type = bus->parent ? 1 : 0; 167 168 if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) 169 return PCIBIOS_DEVICE_NOT_FOUND; 170 171 return bcm63xx_do_cfg_write(type, bus->number, devfn, 172 where, size, val); 173 } 174 175 struct pci_ops bcm63xx_pci_ops = { 176 .read = bcm63xx_pci_read, 177 .write = bcm63xx_pci_write 178 }; 179 180 #ifdef CONFIG_CARDBUS 181 /* 182 * emulate configuration read access on a cardbus bridge 183 */ 184 #define FAKE_CB_BRIDGE_SLOT 0x1e 185 186 static int fake_cb_bridge_bus_number = -1; 187 188 static struct { 189 u16 pci_command; 190 u8 cb_latency; 191 u8 subordinate_busn; 192 u8 cardbus_busn; 193 u8 pci_busn; 194 int bus_assigned; 195 u16 bridge_control; 196 197 u32 mem_base0; 198 u32 mem_limit0; 199 u32 mem_base1; 200 u32 mem_limit1; 201 202 u32 io_base0; 203 u32 io_limit0; 204 u32 io_base1; 205 u32 io_limit1; 206 } fake_cb_bridge_regs; 207 208 static int fake_cb_bridge_read(int where, int size, u32 *val) 209 { 210 unsigned int reg; 211 u32 data; 212 213 data = 0; 214 reg = where >> 2; 215 switch (reg) { 216 case (PCI_VENDOR_ID >> 2): 217 case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2): 218 /* create dummy vendor/device id from our cpu id */ 219 data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM; 220 break; 221 222 case (PCI_COMMAND >> 2): 223 data = (PCI_STATUS_DEVSEL_SLOW << 16); 224 data |= fake_cb_bridge_regs.pci_command; 225 break; 226 227 case (PCI_CLASS_REVISION >> 2): 228 data = (PCI_CLASS_BRIDGE_CARDBUS << 16); 229 break; 230 231 case (PCI_CACHE_LINE_SIZE >> 2): 232 data = (PCI_HEADER_TYPE_CARDBUS << 16); 233 break; 234 235 case (PCI_INTERRUPT_LINE >> 2): 236 /* bridge control */ 237 data = (fake_cb_bridge_regs.bridge_control << 16); 238 /* pin:intA line:0xff */ 239 data |= (0x1 << 8) | 0xff; 240 break; 241 242 case (PCI_CB_PRIMARY_BUS >> 2): 243 data = (fake_cb_bridge_regs.cb_latency << 24); 244 data |= (fake_cb_bridge_regs.subordinate_busn << 16); 245 data |= (fake_cb_bridge_regs.cardbus_busn << 8); 246 data |= fake_cb_bridge_regs.pci_busn; 247 break; 248 249 case (PCI_CB_MEMORY_BASE_0 >> 2): 250 data = fake_cb_bridge_regs.mem_base0; 251 break; 252 253 case (PCI_CB_MEMORY_LIMIT_0 >> 2): 254 data = fake_cb_bridge_regs.mem_limit0; 255 break; 256 257 case (PCI_CB_MEMORY_BASE_1 >> 2): 258 data = fake_cb_bridge_regs.mem_base1; 259 break; 260 261 case (PCI_CB_MEMORY_LIMIT_1 >> 2): 262 data = fake_cb_bridge_regs.mem_limit1; 263 break; 264 265 case (PCI_CB_IO_BASE_0 >> 2): 266 /* | 1 for 32bits io support */ 267 data = fake_cb_bridge_regs.io_base0 | 0x1; 268 break; 269 270 case (PCI_CB_IO_LIMIT_0 >> 2): 271 data = fake_cb_bridge_regs.io_limit0; 272 break; 273 274 case (PCI_CB_IO_BASE_1 >> 2): 275 /* | 1 for 32bits io support */ 276 data = fake_cb_bridge_regs.io_base1 | 0x1; 277 break; 278 279 case (PCI_CB_IO_LIMIT_1 >> 2): 280 data = fake_cb_bridge_regs.io_limit1; 281 break; 282 } 283 284 *val = postprocess_read(data, where, size); 285 return PCIBIOS_SUCCESSFUL; 286 } 287 288 /* 289 * emulate configuration write access on a cardbus bridge 290 */ 291 static int fake_cb_bridge_write(int where, int size, u32 val) 292 { 293 unsigned int reg; 294 u32 data, tmp; 295 int ret; 296 297 ret = fake_cb_bridge_read((where & ~0x3), 4, &data); 298 if (ret != PCIBIOS_SUCCESSFUL) 299 return ret; 300 301 data = preprocess_write(data, val, where, size); 302 303 reg = where >> 2; 304 switch (reg) { 305 case (PCI_COMMAND >> 2): 306 fake_cb_bridge_regs.pci_command = (data & 0xffff); 307 break; 308 309 case (PCI_CB_PRIMARY_BUS >> 2): 310 fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff; 311 fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff; 312 fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff; 313 fake_cb_bridge_regs.pci_busn = data & 0xff; 314 if (fake_cb_bridge_regs.cardbus_busn) 315 fake_cb_bridge_regs.bus_assigned = 1; 316 break; 317 318 case (PCI_INTERRUPT_LINE >> 2): 319 tmp = (data >> 16) & 0xffff; 320 /* disable memory prefetch support */ 321 tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0; 322 tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1; 323 fake_cb_bridge_regs.bridge_control = tmp; 324 break; 325 326 case (PCI_CB_MEMORY_BASE_0 >> 2): 327 fake_cb_bridge_regs.mem_base0 = data; 328 break; 329 330 case (PCI_CB_MEMORY_LIMIT_0 >> 2): 331 fake_cb_bridge_regs.mem_limit0 = data; 332 break; 333 334 case (PCI_CB_MEMORY_BASE_1 >> 2): 335 fake_cb_bridge_regs.mem_base1 = data; 336 break; 337 338 case (PCI_CB_MEMORY_LIMIT_1 >> 2): 339 fake_cb_bridge_regs.mem_limit1 = data; 340 break; 341 342 case (PCI_CB_IO_BASE_0 >> 2): 343 fake_cb_bridge_regs.io_base0 = data; 344 break; 345 346 case (PCI_CB_IO_LIMIT_0 >> 2): 347 fake_cb_bridge_regs.io_limit0 = data; 348 break; 349 350 case (PCI_CB_IO_BASE_1 >> 2): 351 fake_cb_bridge_regs.io_base1 = data; 352 break; 353 354 case (PCI_CB_IO_LIMIT_1 >> 2): 355 fake_cb_bridge_regs.io_limit1 = data; 356 break; 357 } 358 359 return PCIBIOS_SUCCESSFUL; 360 } 361 362 static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn, 363 int where, int size, u32 *val) 364 { 365 /* snoop access to slot 0x1e on root bus, we fake a cardbus 366 * bridge at this location */ 367 if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { 368 fake_cb_bridge_bus_number = bus->number; 369 return fake_cb_bridge_read(where, size, val); 370 } 371 372 /* a configuration cycle for the device behind the cardbus 373 * bridge is actually done as a type 0 cycle on the primary 374 * bus. This means that only one device can be on the cardbus 375 * bus */ 376 if (fake_cb_bridge_regs.bus_assigned && 377 bus->number == fake_cb_bridge_regs.cardbus_busn && 378 PCI_SLOT(devfn) == 0) 379 return bcm63xx_do_cfg_read(0, 0, 380 PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), 381 where, size, val); 382 383 return PCIBIOS_DEVICE_NOT_FOUND; 384 } 385 386 static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn, 387 int where, int size, u32 val) 388 { 389 if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { 390 fake_cb_bridge_bus_number = bus->number; 391 return fake_cb_bridge_write(where, size, val); 392 } 393 394 if (fake_cb_bridge_regs.bus_assigned && 395 bus->number == fake_cb_bridge_regs.cardbus_busn && 396 PCI_SLOT(devfn) == 0) 397 return bcm63xx_do_cfg_write(0, 0, 398 PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), 399 where, size, val); 400 401 return PCIBIOS_DEVICE_NOT_FOUND; 402 } 403 404 struct pci_ops bcm63xx_cb_ops = { 405 .read = bcm63xx_cb_read, 406 .write = bcm63xx_cb_write, 407 }; 408 409 /* 410 * only one IO window, so it cannot be shared by PCI and cardbus, use 411 * fixup to choose and detect unhandled configuration 412 */ 413 static void bcm63xx_fixup(struct pci_dev *dev) 414 { 415 static int io_window = -1; 416 int i, found, new_io_window; 417 u32 val; 418 419 /* look for any io resource */ 420 found = 0; 421 for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { 422 if (pci_resource_flags(dev, i) & IORESOURCE_IO) { 423 found = 1; 424 break; 425 } 426 } 427 428 if (!found) 429 return; 430 431 /* skip our fake bus with only cardbus bridge on it */ 432 if (dev->bus->number == fake_cb_bridge_bus_number) 433 return; 434 435 /* find on which bus the device is */ 436 if (fake_cb_bridge_regs.bus_assigned && 437 dev->bus->number == fake_cb_bridge_regs.cardbus_busn && 438 PCI_SLOT(dev->devfn) == 0) 439 new_io_window = 1; 440 else 441 new_io_window = 0; 442 443 if (new_io_window == io_window) 444 return; 445 446 if (io_window != -1) { 447 printk(KERN_ERR "bcm63xx: both PCI and cardbus devices " 448 "need IO, which hardware cannot do\n"); 449 return; 450 } 451 452 printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n", 453 (new_io_window == 0) ? "PCI" : "cardbus"); 454 455 val = bcm_mpi_readl(MPI_L2PIOREMAP_REG); 456 if (io_window) 457 val |= MPI_L2PREMAP_IS_CARDBUS_MASK; 458 else 459 val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK; 460 bcm_mpi_writel(val, MPI_L2PIOREMAP_REG); 461 462 io_window = new_io_window; 463 } 464 465 DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup); 466 #endif 467 468 static int bcm63xx_pcie_can_access(struct pci_bus *bus, int devfn) 469 { 470 switch (bus->number) { 471 case PCIE_BUS_BRIDGE: 472 return (PCI_SLOT(devfn) == 0); 473 case PCIE_BUS_DEVICE: 474 if (PCI_SLOT(devfn) == 0) 475 return bcm_pcie_readl(PCIE_DLSTATUS_REG) 476 & DLSTATUS_PHYLINKUP; 477 default: 478 return false; 479 } 480 } 481 482 static int bcm63xx_pcie_read(struct pci_bus *bus, unsigned int devfn, 483 int where, int size, u32 *val) 484 { 485 u32 data; 486 u32 reg = where & ~3; 487 488 if (!bcm63xx_pcie_can_access(bus, devfn)) 489 return PCIBIOS_DEVICE_NOT_FOUND; 490 491 if (bus->number == PCIE_BUS_DEVICE) 492 reg += PCIE_DEVICE_OFFSET; 493 494 data = bcm_pcie_readl(reg); 495 496 *val = postprocess_read(data, where, size); 497 498 return PCIBIOS_SUCCESSFUL; 499 500 } 501 502 static int bcm63xx_pcie_write(struct pci_bus *bus, unsigned int devfn, 503 int where, int size, u32 val) 504 { 505 u32 data; 506 u32 reg = where & ~3; 507 508 if (!bcm63xx_pcie_can_access(bus, devfn)) 509 return PCIBIOS_DEVICE_NOT_FOUND; 510 511 if (bus->number == PCIE_BUS_DEVICE) 512 reg += PCIE_DEVICE_OFFSET; 513 514 515 data = bcm_pcie_readl(reg); 516 517 data = preprocess_write(data, val, where, size); 518 bcm_pcie_writel(data, reg); 519 520 return PCIBIOS_SUCCESSFUL; 521 } 522 523 524 struct pci_ops bcm63xx_pcie_ops = { 525 .read = bcm63xx_pcie_read, 526 .write = bcm63xx_pcie_write 527 }; 528