xref: /openbmc/linux/arch/mips/pci/fixup-fuloong2e.c (revision e3b9f1e8)
1 /*
2  * Copyright (C) 2004 ICT CAS
3  * Author: Li xiaoyu, ICT CAS
4  *   lixy@ict.ac.cn
5  *
6  * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology
7  * Author: Fuxin Zhang, zhangfx@lemote.com
8  *
9  *  This program is free software; you can redistribute	 it and/or modify it
10  *  under  the terms of	 the GNU General  Public License as published by the
11  *  Free Software Foundation;  either version 2 of the	License, or (at your
12  *  option) any later version.
13  */
14 #include <linux/init.h>
15 #include <linux/pci.h>
16 
17 #include <loongson.h>
18 
19 /* South bridge slot number is set by the pci probe process */
20 static u8 sb_slot = 5;
21 
22 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
23 {
24 	int irq = 0;
25 
26 	if (slot == sb_slot) {
27 		switch (PCI_FUNC(dev->devfn)) {
28 		case 2:
29 			irq = 10;
30 			break;
31 		case 3:
32 			irq = 11;
33 			break;
34 		case 5:
35 			irq = 9;
36 			break;
37 		}
38 	} else {
39 		irq = LOONGSON_IRQ_BASE + 25 + pin;
40 	}
41 	return irq;
42 
43 }
44 
45 /* Do platform specific device initialization at pci_enable_device() time */
46 int pcibios_plat_dev_init(struct pci_dev *dev)
47 {
48 	return 0;
49 }
50 
51 static void loongson2e_nec_fixup(struct pci_dev *pdev)
52 {
53 	unsigned int val;
54 
55 	/* Configures port 1, 2, 3, 4 to be validate*/
56 	pci_read_config_dword(pdev, 0xe0, &val);
57 	pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4);
58 
59 	/* System clock is 48-MHz Oscillator. */
60 	pci_write_config_dword(pdev, 0xe4, 1 << 5);
61 }
62 
63 static void loongson2e_686b_func0_fixup(struct pci_dev *pdev)
64 {
65 	unsigned char c;
66 
67 	sb_slot = PCI_SLOT(pdev->devfn);
68 
69 	printk(KERN_INFO "via686b fix: ISA bridge\n");
70 
71 	/*  Enable I/O Recovery time */
72 	pci_write_config_byte(pdev, 0x40, 0x08);
73 
74 	/*  Enable ISA refresh */
75 	pci_write_config_byte(pdev, 0x41, 0x01);
76 
77 	/*  disable ISA line buffer */
78 	pci_write_config_byte(pdev, 0x45, 0x00);
79 
80 	/*  Gate INTR, and flush line buffer */
81 	pci_write_config_byte(pdev, 0x46, 0xe0);
82 
83 	/*  Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */
84 	/* pci_write_config_byte(pdev, 0x47, 0x20); */
85 
86 	/*
87 	 *  enable PCI Delay Transaction, Enable EISA ports 4D0/4D1.
88 	 *  enable time-out timer
89 	 */
90 	pci_write_config_byte(pdev, 0x47, 0xe6);
91 
92 	/*
93 	 * enable level trigger on pci irqs: 9,10,11,13
94 	 * important! without this PCI interrupts won't work
95 	 */
96 	outb(0x2e, 0x4d1);
97 
98 	/*  512 K PCI Decode */
99 	pci_write_config_byte(pdev, 0x48, 0x01);
100 
101 	/*  Wait for PGNT before grant to ISA Master/DMA */
102 	pci_write_config_byte(pdev, 0x4a, 0x84);
103 
104 	/*
105 	 * Plug'n'Play
106 	 *
107 	 *  Parallel DRQ 3, Floppy DRQ 2 (default)
108 	 */
109 	pci_write_config_byte(pdev, 0x50, 0x0e);
110 
111 	/*
112 	 * IRQ Routing for Floppy and Parallel port
113 	 *
114 	 *  IRQ 6 for floppy, IRQ 7 for parallel port
115 	 */
116 	pci_write_config_byte(pdev, 0x51, 0x76);
117 
118 	/* IRQ Routing for serial ports (take IRQ 3 and 4) */
119 	pci_write_config_byte(pdev, 0x52, 0x34);
120 
121 	/*  All IRQ's level triggered. */
122 	pci_write_config_byte(pdev, 0x54, 0x00);
123 
124 	/* route PIRQA-D irq */
125 	pci_write_config_byte(pdev, 0x55, 0x90);	/* bit 7-4, PIRQA */
126 	pci_write_config_byte(pdev, 0x56, 0xba);	/* bit 7-4, PIRQC; */
127 							/* 3-0, PIRQB */
128 	pci_write_config_byte(pdev, 0x57, 0xd0);	/* bit 7-4, PIRQD */
129 
130 	/* enable function 5/6, audio/modem */
131 	pci_read_config_byte(pdev, 0x85, &c);
132 	c &= ~(0x3 << 2);
133 	pci_write_config_byte(pdev, 0x85, c);
134 
135 	printk(KERN_INFO"via686b fix: ISA bridge done\n");
136 }
137 
138 static void loongson2e_686b_func1_fixup(struct pci_dev *pdev)
139 {
140 	printk(KERN_INFO"via686b fix: IDE\n");
141 
142 	/* Modify IDE controller setup */
143 	pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48);
144 	pci_write_config_byte(pdev, PCI_COMMAND,
145 			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
146 			      PCI_COMMAND_MASTER);
147 	pci_write_config_byte(pdev, 0x40, 0x0b);
148 	/* legacy mode */
149 	pci_write_config_byte(pdev, 0x42, 0x09);
150 
151 #if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */
152 	/* disable read prefetch/write post buffers */
153 	pci_write_config_byte(pdev, 0x41, 0x02);
154 
155 	/* use 3/4 as fifo thresh hold	*/
156 	pci_write_config_byte(pdev, 0x43, 0x0a);
157 	pci_write_config_byte(pdev, 0x44, 0x00);
158 
159 	pci_write_config_byte(pdev, 0x45, 0x00);
160 #else
161 	pci_write_config_byte(pdev, 0x41, 0xc2);
162 	pci_write_config_byte(pdev, 0x43, 0x35);
163 	pci_write_config_byte(pdev, 0x44, 0x1c);
164 
165 	pci_write_config_byte(pdev, 0x45, 0x10);
166 #endif
167 
168 	printk(KERN_INFO"via686b fix: IDE done\n");
169 }
170 
171 static void loongson2e_686b_func2_fixup(struct pci_dev *pdev)
172 {
173 	/* irq routing */
174 	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10);
175 }
176 
177 static void loongson2e_686b_func3_fixup(struct pci_dev *pdev)
178 {
179 	/* irq routing */
180 	pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11);
181 }
182 
183 static void loongson2e_686b_func5_fixup(struct pci_dev *pdev)
184 {
185 	unsigned int val;
186 	unsigned char c;
187 
188 	/* enable IO */
189 	pci_write_config_byte(pdev, PCI_COMMAND,
190 			      PCI_COMMAND_IO | PCI_COMMAND_MEMORY |
191 			      PCI_COMMAND_MASTER);
192 	pci_read_config_dword(pdev, 0x4, &val);
193 	pci_write_config_dword(pdev, 0x4, val | 1);
194 
195 	/* route ac97 IRQ */
196 	pci_write_config_byte(pdev, 0x3c, 9);
197 
198 	pci_read_config_byte(pdev, 0x8, &c);
199 
200 	/* link control: enable link & SGD PCM output */
201 	pci_write_config_byte(pdev, 0x41, 0xcc);
202 
203 	/* disable game port, FM, midi, sb, enable write to reg2c-2f */
204 	pci_write_config_byte(pdev, 0x42, 0x20);
205 
206 	/* we are using Avance logic codec */
207 	pci_write_config_word(pdev, 0x2c, 0x1005);
208 	pci_write_config_word(pdev, 0x2e, 0x4710);
209 	pci_read_config_dword(pdev, 0x2c, &val);
210 
211 	pci_write_config_byte(pdev, 0x42, 0x0);
212 }
213 
214 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686,
215 			 loongson2e_686b_func0_fixup);
216 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1,
217 			 loongson2e_686b_func1_fixup);
218 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2,
219 			 loongson2e_686b_func2_fixup);
220 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3,
221 			 loongson2e_686b_func3_fixup);
222 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5,
223 			 loongson2e_686b_func5_fixup);
224 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB,
225 			 loongson2e_nec_fixup);
226