1 /* 2 * Copyright (C) 2004 ICT CAS 3 * Author: Li xiaoyu, ICT CAS 4 * lixy@ict.ac.cn 5 * 6 * Copyright (C) 2007 Lemote, Inc. & Institute of Computing Technology 7 * Author: Fuxin Zhang, zhangfx@lemote.com 8 * 9 * This program is free software; you can redistribute it and/or modify it 10 * under the terms of the GNU General Public License as published by the 11 * Free Software Foundation; either version 2 of the License, or (at your 12 * option) any later version. 13 */ 14 #include <linux/init.h> 15 #include <linux/pci.h> 16 17 #include <loongson.h> 18 19 /* South bridge slot number is set by the pci probe process */ 20 static u8 sb_slot = 5; 21 22 int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 23 { 24 int irq = 0; 25 26 if (slot == sb_slot) { 27 switch (PCI_FUNC(dev->devfn)) { 28 case 2: 29 irq = 10; 30 break; 31 case 3: 32 irq = 11; 33 break; 34 case 5: 35 irq = 9; 36 break; 37 } 38 } else { 39 irq = LOONGSON_IRQ_BASE + 25 + pin; 40 } 41 return irq; 42 43 } 44 45 /* Do platform specific device initialization at pci_enable_device() time */ 46 int pcibios_plat_dev_init(struct pci_dev *dev) 47 { 48 return 0; 49 } 50 51 static void __init loongson2e_nec_fixup(struct pci_dev *pdev) 52 { 53 unsigned int val; 54 55 /* Configures port 1, 2, 3, 4 to be validate*/ 56 pci_read_config_dword(pdev, 0xe0, &val); 57 pci_write_config_dword(pdev, 0xe0, (val & ~7) | 0x4); 58 59 /* System clock is 48-MHz Oscillator. */ 60 pci_write_config_dword(pdev, 0xe4, 1 << 5); 61 } 62 63 static void __init loongson2e_686b_func0_fixup(struct pci_dev *pdev) 64 { 65 unsigned char c; 66 67 sb_slot = PCI_SLOT(pdev->devfn); 68 69 printk(KERN_INFO "via686b fix: ISA bridge\n"); 70 71 /* Enable I/O Recovery time */ 72 pci_write_config_byte(pdev, 0x40, 0x08); 73 74 /* Enable ISA refresh */ 75 pci_write_config_byte(pdev, 0x41, 0x01); 76 77 /* disable ISA line buffer */ 78 pci_write_config_byte(pdev, 0x45, 0x00); 79 80 /* Gate INTR, and flush line buffer */ 81 pci_write_config_byte(pdev, 0x46, 0xe0); 82 83 /* Disable PCI Delay Transaction, Enable EISA ports 4D0/4D1. */ 84 /* pci_write_config_byte(pdev, 0x47, 0x20); */ 85 86 /* 87 * enable PCI Delay Transaction, Enable EISA ports 4D0/4D1. 88 * enable time-out timer 89 */ 90 pci_write_config_byte(pdev, 0x47, 0xe6); 91 92 /* 93 * enable level trigger on pci irqs: 9,10,11,13 94 * important! without this PCI interrupts won't work 95 */ 96 outb(0x2e, 0x4d1); 97 98 /* 512 K PCI Decode */ 99 pci_write_config_byte(pdev, 0x48, 0x01); 100 101 /* Wait for PGNT before grant to ISA Master/DMA */ 102 pci_write_config_byte(pdev, 0x4a, 0x84); 103 104 /* 105 * Plug'n'Play 106 * 107 * Parallel DRQ 3, Floppy DRQ 2 (default) 108 */ 109 pci_write_config_byte(pdev, 0x50, 0x0e); 110 111 /* 112 * IRQ Routing for Floppy and Parallel port 113 * 114 * IRQ 6 for floppy, IRQ 7 for parallel port 115 */ 116 pci_write_config_byte(pdev, 0x51, 0x76); 117 118 /* IRQ Routing for serial ports (take IRQ 3 and 4) */ 119 pci_write_config_byte(pdev, 0x52, 0x34); 120 121 /* All IRQ's level triggered. */ 122 pci_write_config_byte(pdev, 0x54, 0x00); 123 124 /* route PIRQA-D irq */ 125 pci_write_config_byte(pdev, 0x55, 0x90); /* bit 7-4, PIRQA */ 126 pci_write_config_byte(pdev, 0x56, 0xba); /* bit 7-4, PIRQC; */ 127 /* 3-0, PIRQB */ 128 pci_write_config_byte(pdev, 0x57, 0xd0); /* bit 7-4, PIRQD */ 129 130 /* enable function 5/6, audio/modem */ 131 pci_read_config_byte(pdev, 0x85, &c); 132 c &= ~(0x3 << 2); 133 pci_write_config_byte(pdev, 0x85, c); 134 135 printk(KERN_INFO"via686b fix: ISA bridge done\n"); 136 } 137 138 static void __init loongson2e_686b_func1_fixup(struct pci_dev *pdev) 139 { 140 printk(KERN_INFO"via686b fix: IDE\n"); 141 142 /* Modify IDE controller setup */ 143 pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 48); 144 pci_write_config_byte(pdev, PCI_COMMAND, 145 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 146 PCI_COMMAND_MASTER); 147 pci_write_config_byte(pdev, 0x40, 0x0b); 148 /* legacy mode */ 149 pci_write_config_byte(pdev, 0x42, 0x09); 150 151 #if 1/* play safe, otherwise we may see notebook's usb keyboard lockup */ 152 /* disable read prefetch/write post buffers */ 153 pci_write_config_byte(pdev, 0x41, 0x02); 154 155 /* use 3/4 as fifo thresh hold */ 156 pci_write_config_byte(pdev, 0x43, 0x0a); 157 pci_write_config_byte(pdev, 0x44, 0x00); 158 159 pci_write_config_byte(pdev, 0x45, 0x00); 160 #else 161 pci_write_config_byte(pdev, 0x41, 0xc2); 162 pci_write_config_byte(pdev, 0x43, 0x35); 163 pci_write_config_byte(pdev, 0x44, 0x1c); 164 165 pci_write_config_byte(pdev, 0x45, 0x10); 166 #endif 167 168 printk(KERN_INFO"via686b fix: IDE done\n"); 169 } 170 171 static void __init loongson2e_686b_func2_fixup(struct pci_dev *pdev) 172 { 173 /* irq routing */ 174 pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 10); 175 } 176 177 static void __init loongson2e_686b_func3_fixup(struct pci_dev *pdev) 178 { 179 /* irq routing */ 180 pci_write_config_byte(pdev, PCI_INTERRUPT_LINE, 11); 181 } 182 183 static void __init loongson2e_686b_func5_fixup(struct pci_dev *pdev) 184 { 185 unsigned int val; 186 unsigned char c; 187 188 /* enable IO */ 189 pci_write_config_byte(pdev, PCI_COMMAND, 190 PCI_COMMAND_IO | PCI_COMMAND_MEMORY | 191 PCI_COMMAND_MASTER); 192 pci_read_config_dword(pdev, 0x4, &val); 193 pci_write_config_dword(pdev, 0x4, val | 1); 194 195 /* route ac97 IRQ */ 196 pci_write_config_byte(pdev, 0x3c, 9); 197 198 pci_read_config_byte(pdev, 0x8, &c); 199 200 /* link control: enable link & SGD PCM output */ 201 pci_write_config_byte(pdev, 0x41, 0xcc); 202 203 /* disable game port, FM, midi, sb, enable write to reg2c-2f */ 204 pci_write_config_byte(pdev, 0x42, 0x20); 205 206 /* we are using Avance logic codec */ 207 pci_write_config_word(pdev, 0x2c, 0x1005); 208 pci_write_config_word(pdev, 0x2e, 0x4710); 209 pci_read_config_dword(pdev, 0x2c, &val); 210 211 pci_write_config_byte(pdev, 0x42, 0x0); 212 } 213 214 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686, 215 loongson2e_686b_func0_fixup); 216 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, 217 loongson2e_686b_func1_fixup); 218 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_2, 219 loongson2e_686b_func2_fixup); 220 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, 221 loongson2e_686b_func3_fixup); 222 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_5, 223 loongson2e_686b_func5_fixup); 224 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_USB, 225 loongson2e_nec_fixup); 226