1 /* 2 * Cobalt Qube/Raq PCI support 3 * 4 * This file is subject to the terms and conditions of the GNU General Public 5 * License. See the file "COPYING" in the main directory of this archive 6 * for more details. 7 * 8 * Copyright (C) 1995, 1996, 1997, 2002, 2003 by Ralf Baechle 9 * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv) 10 */ 11 #include <linux/types.h> 12 #include <linux/pci.h> 13 #include <linux/kernel.h> 14 #include <linux/init.h> 15 16 #include <asm/io.h> 17 #include <asm/gt64120.h> 18 19 #include <cobalt.h> 20 #include <irq.h> 21 22 /* 23 * PCI slot numbers 24 */ 25 #define COBALT_PCICONF_CPU 0x06 26 #define COBALT_PCICONF_ETH0 0x07 27 #define COBALT_PCICONF_RAQSCSI 0x08 28 #define COBALT_PCICONF_VIA 0x09 29 #define COBALT_PCICONF_PCISLOT 0x0A 30 #define COBALT_PCICONF_ETH1 0x0C 31 32 /* 33 * The Cobalt board ID information. The boards have an ID number wired 34 * into the VIA that is available in the high nibble of register 94. 35 */ 36 #define VIA_COBALT_BRD_ID_REG 0x94 37 #define VIA_COBALT_BRD_REG_to_ID(reg) ((unsigned char)(reg) >> 4) 38 39 static void qube_raq_galileo_early_fixup(struct pci_dev *dev) 40 { 41 if (dev->devfn == PCI_DEVFN(0, 0) && 42 (dev->class >> 8) == PCI_CLASS_MEMORY_OTHER) { 43 44 dev->class = (PCI_CLASS_BRIDGE_HOST << 8) | (dev->class & 0xff); 45 46 printk(KERN_INFO "Galileo: fixed bridge class\n"); 47 } 48 } 49 50 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, 51 qube_raq_galileo_early_fixup); 52 53 static void qube_raq_via_bmIDE_fixup(struct pci_dev *dev) 54 { 55 unsigned short cfgword; 56 unsigned char lt; 57 58 /* Enable Bus Mastering and fast back to back. */ 59 pci_read_config_word(dev, PCI_COMMAND, &cfgword); 60 cfgword |= (PCI_COMMAND_FAST_BACK | PCI_COMMAND_MASTER); 61 pci_write_config_word(dev, PCI_COMMAND, cfgword); 62 63 /* Enable both ide interfaces. ROM only enables primary one. */ 64 pci_write_config_byte(dev, 0x40, 0xb); 65 66 /* Set latency timer to reasonable value. */ 67 pci_read_config_byte(dev, PCI_LATENCY_TIMER, <); 68 if (lt < 64) 69 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); 70 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8); 71 } 72 73 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, 74 qube_raq_via_bmIDE_fixup); 75 76 static void qube_raq_galileo_fixup(struct pci_dev *dev) 77 { 78 if (dev->devfn != PCI_DEVFN(0, 0)) 79 return; 80 81 /* Fix PCI latency-timer and cache-line-size values in Galileo 82 * host bridge. 83 */ 84 pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64); 85 pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8); 86 87 /* 88 * The code described by the comment below has been removed 89 * as it causes bus mastering by the Ethernet controllers 90 * to break under any kind of network load. We always set 91 * the retry timeouts to their maximum. 92 * 93 * --x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x--x-- 94 * 95 * On all machines prior to Q2, we had the STOP line disconnected 96 * from Galileo to VIA on PCI. The new Galileo does not function 97 * correctly unless we have it connected. 98 * 99 * Therefore we must set the disconnect/retry cycle values to 100 * something sensible when using the new Galileo. 101 */ 102 103 printk(KERN_INFO "Galileo: revision %u\n", dev->revision); 104 105 #if 0 106 if (dev->revision >= 0x10) { 107 /* New Galileo, assumes PCI stop line to VIA is connected. */ 108 GT_WRITE(GT_PCI0_TOR_OFS, 0x4020); 109 } else if (dev->revision == 0x1 || dev->revision == 0x2) 110 #endif 111 { 112 signed int timeo; 113 /* XXX WE MUST DO THIS ELSE GALILEO LOCKS UP! -DaveM */ 114 timeo = GT_READ(GT_PCI0_TOR_OFS); 115 /* Old Galileo, assumes PCI STOP line to VIA is disconnected. */ 116 GT_WRITE(GT_PCI0_TOR_OFS, 117 (0xff << 16) | /* retry count */ 118 (0xff << 8) | /* timeout 1 */ 119 0xff); /* timeout 0 */ 120 121 /* enable PCI retry exceeded interrupt */ 122 GT_WRITE(GT_INTRMASK_OFS, GT_INTR_RETRYCTR0_MSK | GT_READ(GT_INTRMASK_OFS)); 123 } 124 } 125 126 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_GT64111, 127 qube_raq_galileo_fixup); 128 129 int cobalt_board_id; 130 131 static void qube_raq_via_board_id_fixup(struct pci_dev *dev) 132 { 133 u8 id; 134 int retval; 135 136 retval = pci_read_config_byte(dev, VIA_COBALT_BRD_ID_REG, &id); 137 if (retval) { 138 panic("Cannot read board ID"); 139 return; 140 } 141 142 cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(id); 143 144 printk(KERN_INFO "Cobalt board ID: %d\n", cobalt_board_id); 145 } 146 147 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_0, 148 qube_raq_via_board_id_fixup); 149 150 static char irq_tab_qube1[] = { 151 [COBALT_PCICONF_CPU] = 0, 152 [COBALT_PCICONF_ETH0] = QUBE1_ETH0_IRQ, 153 [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ, 154 [COBALT_PCICONF_VIA] = 0, 155 [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ, 156 [COBALT_PCICONF_ETH1] = 0 157 }; 158 159 static char irq_tab_cobalt[] = { 160 [COBALT_PCICONF_CPU] = 0, 161 [COBALT_PCICONF_ETH0] = ETH0_IRQ, 162 [COBALT_PCICONF_RAQSCSI] = SCSI_IRQ, 163 [COBALT_PCICONF_VIA] = 0, 164 [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ, 165 [COBALT_PCICONF_ETH1] = ETH1_IRQ 166 }; 167 168 static char irq_tab_raq2[] = { 169 [COBALT_PCICONF_CPU] = 0, 170 [COBALT_PCICONF_ETH0] = ETH0_IRQ, 171 [COBALT_PCICONF_RAQSCSI] = RAQ2_SCSI_IRQ, 172 [COBALT_PCICONF_VIA] = 0, 173 [COBALT_PCICONF_PCISLOT] = PCISLOT_IRQ, 174 [COBALT_PCICONF_ETH1] = ETH1_IRQ 175 }; 176 177 int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) 178 { 179 if (cobalt_board_id <= COBALT_BRD_ID_QUBE1) 180 return irq_tab_qube1[slot]; 181 182 if (cobalt_board_id == COBALT_BRD_ID_RAQ2) 183 return irq_tab_raq2[slot]; 184 185 return irq_tab_cobalt[slot]; 186 } 187 188 /* Do platform specific device initialization at pci_enable_device() time */ 189 int pcibios_plat_dev_init(struct pci_dev *dev) 190 { 191 return 0; 192 } 193