1 /* 2 * Copyright (C) 2006 Chris Dearman (chris@mips.com), 3 */ 4 #include <linux/init.h> 5 #include <linux/kernel.h> 6 #include <linux/sched.h> 7 #include <linux/mm.h> 8 9 #include <asm/mipsregs.h> 10 #include <asm/bcache.h> 11 #include <asm/cacheops.h> 12 #include <asm/page.h> 13 #include <asm/pgtable.h> 14 #include <asm/mmu_context.h> 15 #include <asm/r4kcache.h> 16 17 /* 18 * MIPS32/MIPS64 L2 cache handling 19 */ 20 21 /* 22 * Writeback and invalidate the secondary cache before DMA. 23 */ 24 static void mips_sc_wback_inv(unsigned long addr, unsigned long size) 25 { 26 blast_scache_range(addr, addr + size); 27 } 28 29 /* 30 * Invalidate the secondary cache before DMA. 31 */ 32 static void mips_sc_inv(unsigned long addr, unsigned long size) 33 { 34 unsigned long lsize = cpu_scache_line_size(); 35 unsigned long almask = ~(lsize - 1); 36 37 cache_op(Hit_Writeback_Inv_SD, addr & almask); 38 cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask); 39 blast_inv_scache_range(addr, addr + size); 40 } 41 42 static void mips_sc_enable(void) 43 { 44 /* L2 cache is permanently enabled */ 45 } 46 47 static void mips_sc_disable(void) 48 { 49 /* L2 cache is permanently enabled */ 50 } 51 52 static struct bcache_ops mips_sc_ops = { 53 .bc_enable = mips_sc_enable, 54 .bc_disable = mips_sc_disable, 55 .bc_wback_inv = mips_sc_wback_inv, 56 .bc_inv = mips_sc_inv 57 }; 58 59 /* 60 * Check if the L2 cache controller is activated on a particular platform. 61 * MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS 62 * cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the 63 * cache being disabled. However there is no guarantee for this to be 64 * true on all platforms. In an act of stupidity the spec defined bits 65 * 12..15 as implementation defined so below function will eventually have 66 * to be replaced by a platform specific probe. 67 */ 68 static inline int mips_sc_is_activated(struct cpuinfo_mips *c) 69 { 70 unsigned int config2 = read_c0_config2(); 71 unsigned int tmp; 72 73 /* Check the bypass bit (L2B) */ 74 switch (c->cputype) { 75 case CPU_34K: 76 case CPU_74K: 77 case CPU_1004K: 78 case CPU_BMIPS5000: 79 if (config2 & (1 << 12)) 80 return 0; 81 } 82 83 tmp = (config2 >> 4) & 0x0f; 84 if (0 < tmp && tmp <= 7) 85 c->scache.linesz = 2 << tmp; 86 else 87 return 0; 88 return 1; 89 } 90 91 static inline int __init mips_sc_probe(void) 92 { 93 struct cpuinfo_mips *c = ¤t_cpu_data; 94 unsigned int config1, config2; 95 unsigned int tmp; 96 97 /* Mark as not present until probe completed */ 98 c->scache.flags |= MIPS_CACHE_NOT_PRESENT; 99 100 /* Ignore anything but MIPSxx processors */ 101 if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 | 102 MIPS_CPU_ISA_M64R1 | MIPS_CPU_ISA_M64R2))) 103 return 0; 104 105 /* Does this MIPS32/MIPS64 CPU have a config2 register? */ 106 config1 = read_c0_config1(); 107 if (!(config1 & MIPS_CONF_M)) 108 return 0; 109 110 config2 = read_c0_config2(); 111 112 if (!mips_sc_is_activated(c)) 113 return 0; 114 115 tmp = (config2 >> 8) & 0x0f; 116 if (0 <= tmp && tmp <= 7) 117 c->scache.sets = 64 << tmp; 118 else 119 return 0; 120 121 tmp = (config2 >> 0) & 0x0f; 122 if (0 <= tmp && tmp <= 7) 123 c->scache.ways = tmp + 1; 124 else 125 return 0; 126 127 c->scache.waysize = c->scache.sets * c->scache.linesz; 128 c->scache.waybit = __ffs(c->scache.waysize); 129 130 c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT; 131 132 return 1; 133 } 134 135 int __cpuinit mips_sc_init(void) 136 { 137 int found = mips_sc_probe(); 138 if (found) { 139 mips_sc_enable(); 140 bcops = &mips_sc_ops; 141 } 142 return found; 143 } 144