xref: /openbmc/linux/arch/mips/mm/sc-mips.c (revision 239480ab)
1 /*
2  * Copyright (C) 2006 Chris Dearman (chris@mips.com),
3  */
4 #include <linux/init.h>
5 #include <linux/kernel.h>
6 #include <linux/sched.h>
7 #include <linux/mm.h>
8 
9 #include <asm/cpu-type.h>
10 #include <asm/mipsregs.h>
11 #include <asm/bcache.h>
12 #include <asm/cacheops.h>
13 #include <asm/page.h>
14 #include <asm/pgtable.h>
15 #include <asm/mmu_context.h>
16 #include <asm/r4kcache.h>
17 #include <asm/mips-cm.h>
18 
19 /*
20  * MIPS32/MIPS64 L2 cache handling
21  */
22 
23 /*
24  * Writeback and invalidate the secondary cache before DMA.
25  */
26 static void mips_sc_wback_inv(unsigned long addr, unsigned long size)
27 {
28 	blast_scache_range(addr, addr + size);
29 }
30 
31 /*
32  * Invalidate the secondary cache before DMA.
33  */
34 static void mips_sc_inv(unsigned long addr, unsigned long size)
35 {
36 	unsigned long lsize = cpu_scache_line_size();
37 	unsigned long almask = ~(lsize - 1);
38 
39 	cache_op(Hit_Writeback_Inv_SD, addr & almask);
40 	cache_op(Hit_Writeback_Inv_SD, (addr + size - 1) & almask);
41 	blast_inv_scache_range(addr, addr + size);
42 }
43 
44 static void mips_sc_enable(void)
45 {
46 	/* L2 cache is permanently enabled */
47 }
48 
49 static void mips_sc_disable(void)
50 {
51 	/* L2 cache is permanently enabled */
52 }
53 
54 static void mips_sc_prefetch_enable(void)
55 {
56 	unsigned long pftctl;
57 
58 	if (mips_cm_revision() < CM_REV_CM2_5)
59 		return;
60 
61 	/*
62 	 * If there is one or more L2 prefetch unit present then enable
63 	 * prefetching for both code & data, for all ports.
64 	 */
65 	pftctl = read_gcr_l2_pft_control();
66 	if (pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK) {
67 		pftctl &= ~CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK;
68 		pftctl |= PAGE_MASK & CM_GCR_L2_PFT_CONTROL_PAGEMASK_MSK;
69 		pftctl |= CM_GCR_L2_PFT_CONTROL_PFTEN_MSK;
70 		write_gcr_l2_pft_control(pftctl);
71 
72 		pftctl = read_gcr_l2_pft_control_b();
73 		pftctl |= CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK;
74 		pftctl |= CM_GCR_L2_PFT_CONTROL_B_CEN_MSK;
75 		write_gcr_l2_pft_control_b(pftctl);
76 	}
77 }
78 
79 static void mips_sc_prefetch_disable(void)
80 {
81 	unsigned long pftctl;
82 
83 	if (mips_cm_revision() < CM_REV_CM2_5)
84 		return;
85 
86 	pftctl = read_gcr_l2_pft_control();
87 	pftctl &= ~CM_GCR_L2_PFT_CONTROL_PFTEN_MSK;
88 	write_gcr_l2_pft_control(pftctl);
89 
90 	pftctl = read_gcr_l2_pft_control_b();
91 	pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_PORTID_MSK;
92 	pftctl &= ~CM_GCR_L2_PFT_CONTROL_B_CEN_MSK;
93 	write_gcr_l2_pft_control_b(pftctl);
94 }
95 
96 static bool mips_sc_prefetch_is_enabled(void)
97 {
98 	unsigned long pftctl;
99 
100 	if (mips_cm_revision() < CM_REV_CM2_5)
101 		return false;
102 
103 	pftctl = read_gcr_l2_pft_control();
104 	if (!(pftctl & CM_GCR_L2_PFT_CONTROL_NPFT_MSK))
105 		return false;
106 	return !!(pftctl & CM_GCR_L2_PFT_CONTROL_PFTEN_MSK);
107 }
108 
109 static struct bcache_ops mips_sc_ops = {
110 	.bc_enable = mips_sc_enable,
111 	.bc_disable = mips_sc_disable,
112 	.bc_wback_inv = mips_sc_wback_inv,
113 	.bc_inv = mips_sc_inv,
114 	.bc_prefetch_enable = mips_sc_prefetch_enable,
115 	.bc_prefetch_disable = mips_sc_prefetch_disable,
116 	.bc_prefetch_is_enabled = mips_sc_prefetch_is_enabled,
117 };
118 
119 /*
120  * Check if the L2 cache controller is activated on a particular platform.
121  * MTI's L2 controller and the L2 cache controller of Broadcom's BMIPS
122  * cores both use c0_config2's bit 12 as "L2 Bypass" bit, that is the
123  * cache being disabled.  However there is no guarantee for this to be
124  * true on all platforms.  In an act of stupidity the spec defined bits
125  * 12..15 as implementation defined so below function will eventually have
126  * to be replaced by a platform specific probe.
127  */
128 static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
129 {
130 	unsigned int config2 = read_c0_config2();
131 	unsigned int tmp;
132 
133 	/* Check the bypass bit (L2B) */
134 	switch (current_cpu_type()) {
135 	case CPU_34K:
136 	case CPU_74K:
137 	case CPU_1004K:
138 	case CPU_1074K:
139 	case CPU_INTERAPTIV:
140 	case CPU_PROAPTIV:
141 	case CPU_P5600:
142 	case CPU_BMIPS5000:
143 	case CPU_QEMU_GENERIC:
144 	case CPU_P6600:
145 		if (config2 & (1 << 12))
146 			return 0;
147 	}
148 
149 	tmp = (config2 >> 4) & 0x0f;
150 	if (0 < tmp && tmp <= 7)
151 		c->scache.linesz = 2 << tmp;
152 	else
153 		return 0;
154 	return 1;
155 }
156 
157 static int __init mips_sc_probe_cm3(void)
158 {
159 	struct cpuinfo_mips *c = &current_cpu_data;
160 	unsigned long cfg = read_gcr_l2_config();
161 	unsigned long sets, line_sz, assoc;
162 
163 	if (cfg & CM_GCR_L2_CONFIG_BYPASS_MSK)
164 		return 0;
165 
166 	sets = cfg & CM_GCR_L2_CONFIG_SET_SIZE_MSK;
167 	sets >>= CM_GCR_L2_CONFIG_SET_SIZE_SHF;
168 	if (sets)
169 		c->scache.sets = 64 << sets;
170 
171 	line_sz = cfg & CM_GCR_L2_CONFIG_LINE_SIZE_MSK;
172 	line_sz >>= CM_GCR_L2_CONFIG_LINE_SIZE_SHF;
173 	if (line_sz)
174 		c->scache.linesz = 2 << line_sz;
175 
176 	assoc = cfg & CM_GCR_L2_CONFIG_ASSOC_MSK;
177 	assoc >>= CM_GCR_L2_CONFIG_ASSOC_SHF;
178 	c->scache.ways = assoc + 1;
179 	c->scache.waysize = c->scache.sets * c->scache.linesz;
180 	c->scache.waybit = __ffs(c->scache.waysize);
181 
182 	if (c->scache.linesz) {
183 		c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
184 		c->options |= MIPS_CPU_INCLUSIVE_CACHES;
185 		return 1;
186 	}
187 
188 	return 0;
189 }
190 
191 static inline int __init mips_sc_probe(void)
192 {
193 	struct cpuinfo_mips *c = &current_cpu_data;
194 	unsigned int config1, config2;
195 	unsigned int tmp;
196 
197 	/* Mark as not present until probe completed */
198 	c->scache.flags |= MIPS_CACHE_NOT_PRESENT;
199 
200 	if (mips_cm_revision() >= CM_REV_CM3)
201 		return mips_sc_probe_cm3();
202 
203 	/* Ignore anything but MIPSxx processors */
204 	if (!(c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M32R2 |
205 			      MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R1 |
206 			      MIPS_CPU_ISA_M64R2 | MIPS_CPU_ISA_M64R6)))
207 		return 0;
208 
209 	/* Does this MIPS32/MIPS64 CPU have a config2 register? */
210 	config1 = read_c0_config1();
211 	if (!(config1 & MIPS_CONF_M))
212 		return 0;
213 
214 	config2 = read_c0_config2();
215 
216 	if (!mips_sc_is_activated(c))
217 		return 0;
218 
219 	tmp = (config2 >> 8) & 0x0f;
220 	if (tmp <= 7)
221 		c->scache.sets = 64 << tmp;
222 	else
223 		return 0;
224 
225 	tmp = (config2 >> 0) & 0x0f;
226 	if (tmp <= 7)
227 		c->scache.ways = tmp + 1;
228 	else
229 		return 0;
230 
231 	c->scache.waysize = c->scache.sets * c->scache.linesz;
232 	c->scache.waybit = __ffs(c->scache.waysize);
233 
234 	c->scache.flags &= ~MIPS_CACHE_NOT_PRESENT;
235 
236 	return 1;
237 }
238 
239 int mips_sc_init(void)
240 {
241 	int found = mips_sc_probe();
242 	if (found) {
243 		mips_sc_enable();
244 		mips_sc_prefetch_enable();
245 		bcops = &mips_sc_ops;
246 	}
247 	return found;
248 }
249