xref: /openbmc/linux/arch/mips/loongson32/common/time.c (revision f2f4bf5a)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
4  */
5 
6 #include <linux/clk.h>
7 #include <linux/interrupt.h>
8 #include <linux/sizes.h>
9 #include <asm/time.h>
10 
11 #include <loongson1.h>
12 #include <platform.h>
13 
14 #ifdef CONFIG_CEVT_CSRC_LS1X
15 
16 #if defined(CONFIG_TIMER_USE_PWM1)
17 #define LS1X_TIMER_BASE	LS1X_PWM1_BASE
18 #define LS1X_TIMER_IRQ	LS1X_PWM1_IRQ
19 
20 #elif defined(CONFIG_TIMER_USE_PWM2)
21 #define LS1X_TIMER_BASE	LS1X_PWM2_BASE
22 #define LS1X_TIMER_IRQ	LS1X_PWM2_IRQ
23 
24 #elif defined(CONFIG_TIMER_USE_PWM3)
25 #define LS1X_TIMER_BASE	LS1X_PWM3_BASE
26 #define LS1X_TIMER_IRQ	LS1X_PWM3_IRQ
27 
28 #else
29 #define LS1X_TIMER_BASE	LS1X_PWM0_BASE
30 #define LS1X_TIMER_IRQ	LS1X_PWM0_IRQ
31 #endif
32 
33 DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
34 
35 static void __iomem *timer_reg_base;
36 static uint32_t ls1x_jiffies_per_tick;
37 
38 static inline void ls1x_pwmtimer_set_period(uint32_t period)
39 {
40 	__raw_writel(period, timer_reg_base + PWM_HRC);
41 	__raw_writel(period, timer_reg_base + PWM_LRC);
42 }
43 
44 static inline void ls1x_pwmtimer_restart(void)
45 {
46 	__raw_writel(0x0, timer_reg_base + PWM_CNT);
47 	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
48 }
49 
50 void __init ls1x_pwmtimer_init(void)
51 {
52 	timer_reg_base = ioremap_nocache(LS1X_TIMER_BASE, SZ_16);
53 	if (!timer_reg_base)
54 		panic("Failed to remap timer registers");
55 
56 	ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
57 
58 	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
59 	ls1x_pwmtimer_restart();
60 }
61 
62 static u64 ls1x_clocksource_read(struct clocksource *cs)
63 {
64 	unsigned long flags;
65 	int count;
66 	u32 jifs;
67 	static int old_count;
68 	static u32 old_jifs;
69 
70 	raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
71 	/*
72 	 * Although our caller may have the read side of xtime_lock,
73 	 * this is now a seqlock, and we are cheating in this routine
74 	 * by having side effects on state that we cannot undo if
75 	 * there is a collision on the seqlock and our caller has to
76 	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
77 	 * jiffies as volatile despite the lock.  We read jiffies
78 	 * before latching the timer count to guarantee that although
79 	 * the jiffies value might be older than the count (that is,
80 	 * the counter may underflow between the last point where
81 	 * jiffies was incremented and the point where we latch the
82 	 * count), it cannot be newer.
83 	 */
84 	jifs = jiffies;
85 	/* read the count */
86 	count = __raw_readl(timer_reg_base + PWM_CNT);
87 
88 	/*
89 	 * It's possible for count to appear to go the wrong way for this
90 	 * reason:
91 	 *
92 	 *  The timer counter underflows, but we haven't handled the resulting
93 	 *  interrupt and incremented jiffies yet.
94 	 *
95 	 * Previous attempts to handle these cases intelligently were buggy, so
96 	 * we just do the simple thing now.
97 	 */
98 	if (count < old_count && jifs == old_jifs)
99 		count = old_count;
100 
101 	old_count = count;
102 	old_jifs = jifs;
103 
104 	raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
105 
106 	return (u64) (jifs * ls1x_jiffies_per_tick) + count;
107 }
108 
109 static struct clocksource ls1x_clocksource = {
110 	.name		= "ls1x-pwmtimer",
111 	.read		= ls1x_clocksource_read,
112 	.mask		= CLOCKSOURCE_MASK(24),
113 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
114 };
115 
116 static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
117 {
118 	struct clock_event_device *cd = devid;
119 
120 	ls1x_pwmtimer_restart();
121 	cd->event_handler(cd);
122 
123 	return IRQ_HANDLED;
124 }
125 
126 static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
127 {
128 	raw_spin_lock(&ls1x_timer_lock);
129 	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
130 	ls1x_pwmtimer_restart();
131 	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
132 	raw_spin_unlock(&ls1x_timer_lock);
133 
134 	return 0;
135 }
136 
137 static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
138 {
139 	raw_spin_lock(&ls1x_timer_lock);
140 	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
141 	raw_spin_unlock(&ls1x_timer_lock);
142 
143 	return 0;
144 }
145 
146 static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
147 {
148 	raw_spin_lock(&ls1x_timer_lock);
149 	__raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
150 		     timer_reg_base + PWM_CTRL);
151 	raw_spin_unlock(&ls1x_timer_lock);
152 
153 	return 0;
154 }
155 
156 static int ls1x_clockevent_set_next(unsigned long evt,
157 				    struct clock_event_device *cd)
158 {
159 	raw_spin_lock(&ls1x_timer_lock);
160 	ls1x_pwmtimer_set_period(evt);
161 	ls1x_pwmtimer_restart();
162 	raw_spin_unlock(&ls1x_timer_lock);
163 
164 	return 0;
165 }
166 
167 static struct clock_event_device ls1x_clockevent = {
168 	.name			= "ls1x-pwmtimer",
169 	.features		= CLOCK_EVT_FEAT_PERIODIC,
170 	.rating			= 300,
171 	.irq			= LS1X_TIMER_IRQ,
172 	.set_next_event		= ls1x_clockevent_set_next,
173 	.set_state_shutdown	= ls1x_clockevent_set_state_shutdown,
174 	.set_state_periodic	= ls1x_clockevent_set_state_periodic,
175 	.set_state_oneshot	= ls1x_clockevent_set_state_shutdown,
176 	.tick_resume		= ls1x_clockevent_tick_resume,
177 };
178 
179 static struct irqaction ls1x_pwmtimer_irqaction = {
180 	.name		= "ls1x-pwmtimer",
181 	.handler	= ls1x_clockevent_isr,
182 	.dev_id		= &ls1x_clockevent,
183 	.flags		= IRQF_PERCPU | IRQF_TIMER,
184 };
185 
186 static void __init ls1x_time_init(void)
187 {
188 	struct clock_event_device *cd = &ls1x_clockevent;
189 	int ret;
190 
191 	if (!mips_hpt_frequency)
192 		panic("Invalid timer clock rate");
193 
194 	ls1x_pwmtimer_init();
195 
196 	clockevent_set_clock(cd, mips_hpt_frequency);
197 	cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
198 	cd->max_delta_ticks = 0xffffff;
199 	cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
200 	cd->min_delta_ticks = 0x000300;
201 	cd->cpumask = cpumask_of(smp_processor_id());
202 	clockevents_register_device(cd);
203 
204 	ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
205 	ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
206 	if (ret)
207 		panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
208 
209 	setup_irq(LS1X_TIMER_IRQ, &ls1x_pwmtimer_irqaction);
210 }
211 #endif /* CONFIG_CEVT_CSRC_LS1X */
212 
213 void __init plat_time_init(void)
214 {
215 	struct clk *clk = NULL;
216 
217 	/* initialize LS1X clocks */
218 	ls1x_clk_init();
219 
220 #ifdef CONFIG_CEVT_CSRC_LS1X
221 	/* setup LS1X PWM timer */
222 	clk = clk_get(NULL, "ls1x-pwmtimer");
223 	if (IS_ERR(clk))
224 		panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
225 
226 	mips_hpt_frequency = clk_get_rate(clk);
227 	ls1x_time_init();
228 #else
229 	/* setup mips r4k timer */
230 	clk = clk_get(NULL, "cpu_clk");
231 	if (IS_ERR(clk))
232 		panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
233 
234 	mips_hpt_frequency = clk_get_rate(clk) / 2;
235 #endif /* CONFIG_CEVT_CSRC_LS1X */
236 }
237