xref: /openbmc/linux/arch/mips/loongson32/common/time.c (revision a0936e9e)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (c) 2014 Zhang, Keguang <keguang.zhang@gmail.com>
4  */
5 
6 #include <linux/clk.h>
7 #include <linux/of_clk.h>
8 #include <linux/interrupt.h>
9 #include <linux/sizes.h>
10 #include <asm/time.h>
11 
12 #include <loongson1.h>
13 #include <platform.h>
14 
15 #ifdef CONFIG_CEVT_CSRC_LS1X
16 
17 #if defined(CONFIG_TIMER_USE_PWM1)
18 #define LS1X_TIMER_BASE	LS1X_PWM1_BASE
19 #define LS1X_TIMER_IRQ	LS1X_PWM1_IRQ
20 
21 #elif defined(CONFIG_TIMER_USE_PWM2)
22 #define LS1X_TIMER_BASE	LS1X_PWM2_BASE
23 #define LS1X_TIMER_IRQ	LS1X_PWM2_IRQ
24 
25 #elif defined(CONFIG_TIMER_USE_PWM3)
26 #define LS1X_TIMER_BASE	LS1X_PWM3_BASE
27 #define LS1X_TIMER_IRQ	LS1X_PWM3_IRQ
28 
29 #else
30 #define LS1X_TIMER_BASE	LS1X_PWM0_BASE
31 #define LS1X_TIMER_IRQ	LS1X_PWM0_IRQ
32 #endif
33 
34 DEFINE_RAW_SPINLOCK(ls1x_timer_lock);
35 
36 static void __iomem *timer_reg_base;
37 static uint32_t ls1x_jiffies_per_tick;
38 
39 static inline void ls1x_pwmtimer_set_period(uint32_t period)
40 {
41 	__raw_writel(period, timer_reg_base + PWM_HRC);
42 	__raw_writel(period, timer_reg_base + PWM_LRC);
43 }
44 
45 static inline void ls1x_pwmtimer_restart(void)
46 {
47 	__raw_writel(0x0, timer_reg_base + PWM_CNT);
48 	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
49 }
50 
51 void __init ls1x_pwmtimer_init(void)
52 {
53 	timer_reg_base = ioremap(LS1X_TIMER_BASE, SZ_16);
54 	if (!timer_reg_base)
55 		panic("Failed to remap timer registers");
56 
57 	ls1x_jiffies_per_tick = DIV_ROUND_CLOSEST(mips_hpt_frequency, HZ);
58 
59 	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
60 	ls1x_pwmtimer_restart();
61 }
62 
63 static u64 ls1x_clocksource_read(struct clocksource *cs)
64 {
65 	unsigned long flags;
66 	int count;
67 	u32 jifs;
68 	static int old_count;
69 	static u32 old_jifs;
70 
71 	raw_spin_lock_irqsave(&ls1x_timer_lock, flags);
72 	/*
73 	 * Although our caller may have the read side of xtime_lock,
74 	 * this is now a seqlock, and we are cheating in this routine
75 	 * by having side effects on state that we cannot undo if
76 	 * there is a collision on the seqlock and our caller has to
77 	 * retry.  (Namely, old_jifs and old_count.)  So we must treat
78 	 * jiffies as volatile despite the lock.  We read jiffies
79 	 * before latching the timer count to guarantee that although
80 	 * the jiffies value might be older than the count (that is,
81 	 * the counter may underflow between the last point where
82 	 * jiffies was incremented and the point where we latch the
83 	 * count), it cannot be newer.
84 	 */
85 	jifs = jiffies;
86 	/* read the count */
87 	count = __raw_readl(timer_reg_base + PWM_CNT);
88 
89 	/*
90 	 * It's possible for count to appear to go the wrong way for this
91 	 * reason:
92 	 *
93 	 *  The timer counter underflows, but we haven't handled the resulting
94 	 *  interrupt and incremented jiffies yet.
95 	 *
96 	 * Previous attempts to handle these cases intelligently were buggy, so
97 	 * we just do the simple thing now.
98 	 */
99 	if (count < old_count && jifs == old_jifs)
100 		count = old_count;
101 
102 	old_count = count;
103 	old_jifs = jifs;
104 
105 	raw_spin_unlock_irqrestore(&ls1x_timer_lock, flags);
106 
107 	return (u64) (jifs * ls1x_jiffies_per_tick) + count;
108 }
109 
110 static struct clocksource ls1x_clocksource = {
111 	.name		= "ls1x-pwmtimer",
112 	.read		= ls1x_clocksource_read,
113 	.mask		= CLOCKSOURCE_MASK(24),
114 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
115 };
116 
117 static irqreturn_t ls1x_clockevent_isr(int irq, void *devid)
118 {
119 	struct clock_event_device *cd = devid;
120 
121 	ls1x_pwmtimer_restart();
122 	cd->event_handler(cd);
123 
124 	return IRQ_HANDLED;
125 }
126 
127 static int ls1x_clockevent_set_state_periodic(struct clock_event_device *cd)
128 {
129 	raw_spin_lock(&ls1x_timer_lock);
130 	ls1x_pwmtimer_set_period(ls1x_jiffies_per_tick);
131 	ls1x_pwmtimer_restart();
132 	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
133 	raw_spin_unlock(&ls1x_timer_lock);
134 
135 	return 0;
136 }
137 
138 static int ls1x_clockevent_tick_resume(struct clock_event_device *cd)
139 {
140 	raw_spin_lock(&ls1x_timer_lock);
141 	__raw_writel(INT_EN | CNT_EN, timer_reg_base + PWM_CTRL);
142 	raw_spin_unlock(&ls1x_timer_lock);
143 
144 	return 0;
145 }
146 
147 static int ls1x_clockevent_set_state_shutdown(struct clock_event_device *cd)
148 {
149 	raw_spin_lock(&ls1x_timer_lock);
150 	__raw_writel(__raw_readl(timer_reg_base + PWM_CTRL) & ~CNT_EN,
151 		     timer_reg_base + PWM_CTRL);
152 	raw_spin_unlock(&ls1x_timer_lock);
153 
154 	return 0;
155 }
156 
157 static int ls1x_clockevent_set_next(unsigned long evt,
158 				    struct clock_event_device *cd)
159 {
160 	raw_spin_lock(&ls1x_timer_lock);
161 	ls1x_pwmtimer_set_period(evt);
162 	ls1x_pwmtimer_restart();
163 	raw_spin_unlock(&ls1x_timer_lock);
164 
165 	return 0;
166 }
167 
168 static struct clock_event_device ls1x_clockevent = {
169 	.name			= "ls1x-pwmtimer",
170 	.features		= CLOCK_EVT_FEAT_PERIODIC,
171 	.rating			= 300,
172 	.irq			= LS1X_TIMER_IRQ,
173 	.set_next_event		= ls1x_clockevent_set_next,
174 	.set_state_shutdown	= ls1x_clockevent_set_state_shutdown,
175 	.set_state_periodic	= ls1x_clockevent_set_state_periodic,
176 	.set_state_oneshot	= ls1x_clockevent_set_state_shutdown,
177 	.tick_resume		= ls1x_clockevent_tick_resume,
178 };
179 
180 static void __init ls1x_time_init(void)
181 {
182 	struct clock_event_device *cd = &ls1x_clockevent;
183 	int ret;
184 
185 	if (!mips_hpt_frequency)
186 		panic("Invalid timer clock rate");
187 
188 	ls1x_pwmtimer_init();
189 
190 	clockevent_set_clock(cd, mips_hpt_frequency);
191 	cd->max_delta_ns = clockevent_delta2ns(0xffffff, cd);
192 	cd->max_delta_ticks = 0xffffff;
193 	cd->min_delta_ns = clockevent_delta2ns(0x000300, cd);
194 	cd->min_delta_ticks = 0x000300;
195 	cd->cpumask = cpumask_of(smp_processor_id());
196 	clockevents_register_device(cd);
197 
198 	ls1x_clocksource.rating = 200 + mips_hpt_frequency / 10000000;
199 	ret = clocksource_register_hz(&ls1x_clocksource, mips_hpt_frequency);
200 	if (ret)
201 		panic(KERN_ERR "Failed to register clocksource: %d\n", ret);
202 
203 	if (request_irq(LS1X_TIMER_IRQ, ls1x_clockevent_isr,
204 			IRQF_PERCPU | IRQF_TIMER, "ls1x-pwmtimer",
205 			&ls1x_clockevent))
206 		pr_err("Failed to register ls1x-pwmtimer interrupt\n");
207 }
208 #endif /* CONFIG_CEVT_CSRC_LS1X */
209 
210 void __init plat_time_init(void)
211 {
212 	struct clk *clk = NULL;
213 
214 	/* initialize LS1X clocks */
215 	of_clk_init(NULL);
216 
217 #ifdef CONFIG_CEVT_CSRC_LS1X
218 	/* setup LS1X PWM timer */
219 	clk = clk_get(NULL, "ls1x-pwmtimer");
220 	if (IS_ERR(clk))
221 		panic("unable to get timer clock, err=%ld", PTR_ERR(clk));
222 
223 	mips_hpt_frequency = clk_get_rate(clk);
224 	ls1x_time_init();
225 #else
226 	/* setup mips r4k timer */
227 	clk = clk_get(NULL, "cpu_clk");
228 	if (IS_ERR(clk))
229 		panic("unable to get cpu clock, err=%ld", PTR_ERR(clk));
230 
231 	mips_hpt_frequency = clk_get_rate(clk) / 2;
232 #endif /* CONFIG_CEVT_CSRC_LS1X */
233 }
234